{ "tag": [ "compiled" ], "id": "ocds-r6ebe6-0000680073-2022-01-19T00:00:00Z", "date": "2022-01-19T00:00:00Z", "ocid": "ocds-r6ebe6-0000680073", "initiationType": "tender", "parties": [ { "id": "org-112", "name": "University of Strathclyde", "identifier": { "legalName": "University of Strathclyde" }, "address": { "streetAddress": "40 George Street, Procurement Department", "locality": "Glasgow", "region": "UKM82", "postalCode": "G1 1QE" }, "contactPoint": { "name": "Natasha Murray", "email": "natasha.murray@strath.ac.uk", "telephone": "+44 1415484451", "url": "https://www.publictendersscotland.publiccontractsscotland.gov.uk/esop/pts-host/public/pts/web/login.html" }, "roles": [ "buyer", "centralPurchasingBody" ], "details": { "classifications": [ { "id": "Body governed by public law", "scheme": "TED_CA_TYPE" }, { "id": "09", "description": "Education", "scheme": "COFOG" } ], "url": "http://www.strath.ac.uk/" } }, { "id": "org-30", "name": "Glasgow Sheriff Court", "identifier": { "legalName": "Glasgow Sheriff Court" }, "address": { "streetAddress": "Sheriff Clerks Office, PO Box 23, 1 Carlton Place", "locality": "Glasgow", "postalCode": "G5 9DA" }, "contactPoint": { "email": "glasgow@scotcourts.gov.uk", "telephone": "+44 1414298888", "url": "http://www.scotcourts.gov.uk" }, "roles": [ "reviewBody" ] } ], "buyer": { "name": "University of Strathclyde", "id": "org-112" }, "tender": { "id": "UOS-22192-2021", "title": "Supply and Delivery of a Dynamometer", "description": "The University of Strathclyde seek to secure a suitably qualified and experienced supplier to supply and deliver a Dynamometer to the National Manufacturing Institute of Scotland (NMIS) The base plate dynamometer will be used to measure cutting forces on a component during machining.", "status": "active", "items": [ { "id": "1", "deliveryLocation": { "description": "National Manufacturing Institute of Scotland" }, "deliveryAddresses": [ { "region": "UKM82" } ], "relatedLot": "1" } ], "value": { "amount": 41600, "currency": "GBP" }, "procurementMethod": "open", "procurementMethodDetails": "Open procedure", "mainProcurementCategory": "goods", "submissionMethod": [ "electronicSubmission" ], "submissionMethodDetails": "https://www.publictendersscotland.publiccontractsscotland.gov.uk/esop/pts-host/public/pts/web/login.html", "tenderPeriod": { "endDate": "2022-02-02T12:00:00Z" }, "awardPeriod": { "startDate": "2022-02-02T12:00:00Z" }, "documents": [ { "id": "JAN438092", "documentType": "contractNotice", "title": "Supply and Delivery of a Dynamometer", "description": "The University of Strathclyde seek to secure a suitably qualified and experienced supplier to supply and deliver a Dynamometer to the National Manufacturing Institute of Scotland (NMIS) The base plate dynamometer will be used to measure cutting forces on a component during machining.", "url": "https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JAN438092", "format": "text/html" } ], "lots": [ { "id": "1", "description": "The University of Strathclyde seek to secure a suitably qualified and experienced supplier to supply, delivery and commission a Dynamometer at the National Manufacturing Institute of Scotland (NMIS). The base plate dynanometer will be used to measure cutting forces on a component during machining. It is envisioned that this technology will help to eliminate scrap and can improve cutting tool life. The understanding of cutting forces can help to optimise machining strategies and optimising cutting parameters by lowering cutting forces during machining. The Specification for the requirement will include the non-exhaustive list: - Please confirm your offered solution can provide Cutting force measurement in high performance machining applications. Must be able to cover -25 to 25 kN and -2500Nm to 2500Nm (M) - The supplier's proposed solution and all connecting components must be suitable for use in a machining environment including but not limited to; corrosion-resistance, IP67 dust and liquid protection, and protection against penetration by cutting fluids, carbon fibre nanofibre cuttoffs and sharp-edged swarf by splashing water or cutting fluid -The offered solution must not exceed footprint measurements of 260x200x60 mm (LxWxH) - The offered solution will have a force measurement range between -30kN - 60kN -Please confirm the Dynamometer can be used for the below noted types of machining: * Milling, * turning * surface * grinding * drilling", "status": "active", "value": { "amount": 41600, "currency": "GBP" }, "options": { "description": "The Contracting Authority reserves the right to request additional deliveries by the Successful Tenderer, either intended as partial replacement of supplies or installations or as extensions of existing supplies and installations. The Contracting Authority may at its sole discretion exercise this option." }, "hasOptions": true, "submissionTerms": { "variantPolicy": "notAllowed" }, "contractPeriod": { "durationInDays": 390 }, "hasRenewal": false } ], "bidOpening": { "date": "2022-02-02T12:00:00Z" }, "communication": { "atypicalToolUrl": "http://www.publictendersscotland.publiccontractsscotland.gov.uk" }, "contractTerms": { "hasElectronicPayment": true, "hasElectronicOrdering": true, "electronicInvoicingPolicy": "allowed" }, "coveredBy": [ "GPA" ], "selectionCriteria": { "criteria": [ { "type": "economic", "description": "4B.1.2 Bidders will be required to have an average yearly turnover of a minimum of 80,000.00 GBP for the last three (3) years. 4B.5.1a - 4B.5.3 Insurances It is a requirement of this contract that bidders hold, or can commit to obtain prior to the commencement of any subsequently awarded: contract, the types and levels of insurance indicated below: Employer's (Compulsory) Liability Insurance = 10,000,000.00 GBP Public Liability Insurance = 5,000,000.00 GBP Product Liability Insurance = 5,000,000.00 GBP Professional Risk Indemnity Insurance = NOT USED In respect of any one incident and unlimited as to number of claims, and adequate insurances covering all the Contractor's other liabilities in terms of the Contract." }, { "type": "technical", "description": "4.C 1.2. Bidders will be required to provide examples that demonstrate that they have the relevant experience to deliver the supplies as described in part II.2.4 of the Find a Tender Service Contract Notice or the relevant section of the Site Notice. Please provide a minimum of three (3) examples of experience of supply and delivery of the equipment as detailed within the specification over the last three (3) years." } ] }, "submissionTerms": { "languages": [ "en" ], "bidValidityPeriod": { "durationInDays": 90 } }, "classification": { "id": "42000000", "scheme": "CPV" }, "hasRecurrence": false }, "language": "EN", "description": "The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 20489. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343 (SC Ref:680073)", "links": [ { "rel": "canonical", "href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000680073" } ], "noticetype": "PCS Notice - Website Contract Notice" }