{
    "tag": [
        "compiled"
    ],
    "id": "ocds-r6ebe6-0000825231-2026-03-02T00:00:00Z",
    "date": "2026-03-02T00:00:00Z",
    "ocid": "ocds-r6ebe6-0000825231",
    "initiationType": "tender",
    "parties": [
        {
            "id": "org-90",
            "name": "University Of Edinburgh",
            "identifier": {
                "legalName": "University Of Edinburgh"
            },
            "address": {
                "streetAddress": "Charles Stewart House, 9-16 Chambers Street",
                "locality": "Edinburgh",
                "region": "UKM75",
                "postalCode": "EH1 1HT"
            },
            "contactPoint": {
                "name": "Laura Schouten",
                "email": "laura.schouten@ed.ac.uk",
                "url": "http://"
            },
            "roles": [
                "buyer"
            ],
            "details": {
                "classifications": [
                    {
                        "id": "Body governed by public law",
                        "scheme": "TED_CA_TYPE"
                    },
                    {
                        "id": "09",
                        "description": "Education",
                        "scheme": "COFOG"
                    }
                ],
                "url": "http://www.ed.ac.uk"
            }
        },
        {
            "id": "org-106",
            "name": "JEOL (UK) Ltd",
            "identifier": {
                "legalName": "JEOL (UK) Ltd"
            },
            "address": {
                "streetAddress": "JEOL House, Silver Court, Watchmead",
                "locality": "Welwyn Garden City",
                "region": "UK",
                "postalCode": "AL7 1LT"
            },
            "roles": [
                "supplier"
            ],
            "details": {
                "scale": "large",
                "url": "http://"
            }
        },
        {
            "id": "org-40",
            "name": "Edinburgh Sheriff Court",
            "identifier": {
                "legalName": "Edinburgh Sheriff Court"
            },
            "address": {
                "locality": "Edinburgh"
            },
            "contactPoint": {
                "url": "http://"
            },
            "roles": [
                "reviewBody"
            ]
        }
    ],
    "buyer": {
        "name": "University Of Edinburgh",
        "id": "org-90"
    },
    "tender": {
        "id": "NCA31130",
        "title": "EBeam Lithographer",
        "description": "The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following: a) Ultra-fine line lithography: 3 nm linewidth, using commercially available resists. This can be obtained by its single-nm digit beam diameter. b) Ultra-high position accuracy: This can be obtained by a laser interferometer with A (sub-1 nm) reading resolution, enabling a stitching accuracy of +-8 nm and overlay accuracy of +-8 nm. c) Uniform fine pattern writing over entire field: Uniform nm-scale lines can be drawn from edge to edge across a large field (>=2000mm) without the need for stitching. This guarantees better accuracy, eliminates the need for stage movement, and enhances writing speed and throughput. d) High throughput lithography: This will be enabled by a 125 MHz (or higher) high-speed deflection system coupled with a new electron beam column design. e) Wafer scale (& multi wafer) processing: Single cassette auto-loader supporting 8-inch wafers with a multi-cassette automatic sample loading system. Fast loading and pumping time. f) Flexibility in sample holders: Offer the ability to simultaneously handle a variety of wafer sizes by incorporating distinct holders for processing full wafers (2-8 inches) and/or small. g) Software: SEM Imaging Software, Alignment Software and CAD designing Software, which allows using and/or converting into industry standard GDSII and DXF file formats. It is believed the JEOL JBX-8100FS G3 Electron Beam Lithography System is the sole machine which complies with these requirements. Therefore, we deem competition is absent for technical reasons.",
        "status": "complete",
        "items": [
            {
                "id": "1",
                "deliveryLocation": {
                    "description": "Edinburgh, Scotland"
                },
                "deliveryAddresses": [
                    {
                        "region": "UKM75"
                    }
                ],
                "relatedLot": "1"
            }
        ],
        "procurementMethod": "limited",
        "procurementMethodDetails": "Award procedure without prior publication of a call for competition",
        "procurementMethodRationale": "The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following: a) Ultra-fine line lithography: 3 nm linewidth, using commercially available resists. This can be obtained by its single-nm digit beam diameter. b) Ultra-high position accuracy: This can be obtained by a laser interferometer with A (sub-1 nm) reading resolution, enabling a stitching accuracy of +-8 nm and overlay accuracy of +-8 nm. c) Uniform fine pattern writing over entire field: Uniform nm-scale lines can be drawn from edge to edge across a large field (>=2000mm) without the need for stitching. This guarantees better accuracy, eliminates the need for stage movement, and enhances writing speed and throughput. d) High throughput lithography: This will be enabled by a 125 MHz (or higher) high-speed deflection system coupled with a new electron beam column design. e) Wafer scale (& multi wafer) processing: Single cassette auto-loader supporting 8-inch wafers with a multi-cassette automatic sample loading system. Fast loading and pumping time. f) Flexibility in sample holders: Offer the ability to simultaneously handle a variety of wafer sizes by incorporating distinct holders for processing full wafers (2-8 inches) and/or small. g) Software: SEM Imaging Software, Alignment Software and CAD designing Software, which allows using and/or converting into industry standard GDSII and DXF file formats. It is believed the JEOL JBX-8100FS G3 Electron Beam Lithography System is the sole machine which complies with these requirements. Therefore, we deem competition is absent for technical reasons.",
        "mainProcurementCategory": "goods",
        "documents": [
            {
                "id": "MAR550684",
                "documentType": "awardNotice",
                "title": "EBeam Lithographer",
                "description": "The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following: a) Ultra-fine line lithography: 3 nm linewidth, using commercially available resists. This can be obtained by its single-nm digit beam diameter. b) Ultra-high position accuracy: This can be obtained by a laser interferometer with A (sub-1 nm) reading resolution, enabling a stitching accuracy of +-8 nm and overlay accuracy of +-8 nm. c) Uniform fine pattern writing over entire field: Uniform nm-scale lines can be drawn from edge to edge across a large field (>=2000mm) without the need for stitching. This guarantees better accuracy, eliminates the need for stage movement, and enhances writing speed and throughput. d) High throughput lithography: This will be enabled by a 125 MHz (or higher) high-speed deflection system coupled with a new electron beam column design. e) Wafer scale (& multi wafer) processing: Single cassette auto-loader supporting 8-inch wafers with a multi-cassette automatic sample loading system. Fast loading and pumping time. f) Flexibility in sample holders: Offer the ability to simultaneously handle a variety of wafer sizes by incorporating distinct holders for processing full wafers (2-8 inches) and/or small. g) Software: SEM Imaging Software, Alignment Software and CAD designing Software, which allows using and/or converting into industry standard GDSII and DXF file formats. It is believed the JEOL JBX-8100FS G3 Electron Beam Lithography System is the sole machine which complies with these requirements. Therefore, we deem competition is absent for technical reasons.",
                "url": "https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=MAR550684",
                "format": "text/html"
            }
        ],
        "lots": [
            {
                "id": "1",
                "description": "The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following: a) Ultra-fine line lithography: 3 nm linewidth, using commercially available resists. This can be obtained by its single-nm digit beam diameter. b) Ultra-high position accuracy: This can be obtained by a laser interferometer with A (sub-1 nm) reading resolution, enabling a stitching accuracy of +-8 nm and overlay accuracy of +-8 nm. c) Uniform fine pattern writing over entire field: Uniform nm-scale lines can be drawn from edge to edge across a large field (>=2000mm) without the need for stitching. This guarantees better accuracy, eliminates the need for stage movement, and enhances writing speed and throughput. d) High throughput lithography: This will be enabled by a 125 MHz (or higher) high-speed deflection system coupled with a new electron beam column design. e) Wafer scale (& multi wafer) processing: Single cassette auto-loader supporting 8-inch wafers with a multi-cassette automatic sample loading system. Fast loading and pumping time. f) Flexibility in sample holders: Offer the ability to simultaneously handle a variety of wafer sizes by incorporating distinct holders for processing full wafers (2-8 inches) and/or small. g) Software: SEM Imaging Software, Alignment Software and CAD designing Software, which allows using and/or converting into industry standard GDSII and DXF file formats. It is believed the JEOL JBX-8100FS G3 Electron Beam Lithography System is the sole machine which complies with these requirements. Therefore, we deem competition is absent for technical reasons.",
                "status": "complete",
                "awardCriteria": {
                    "criteria": [
                        {
                            "type": "quality",
                            "name": "Suitability to fulfil requirement",
                            "description": "50"
                        },
                        {
                            "type": "cost",
                            "name": "Cost alignment with appetite",
                            "description": "50"
                        }
                    ]
                },
                "options": {
                    "description": "For transparency, extensions to service arrangements, and spare parts, may be purchased from the awarded supplier."
                },
                "hasOptions": true
            }
        ],
        "coveredBy": [
            "GPA"
        ],
        "procurementMethodRationaleClassifications": [
            {
                "id": "D_TECHNICAL",
                "description": "The works, supplies or services can be provided only by a particular economic operator due to absence of competition for technical reasons",
                "scheme": "TED_PT_AWARD_CONTRACT_WITHOUT_CALL"
            }
        ],
        "classification": {
            "id": "38000000",
            "scheme": "CPV"
        },
        "legalBasis": {
            "id": "32014L0024",
            "scheme": "CELEX"
        }
    },
    "awards": [
        {
            "id": "NCA31130-1",
            "suppliers": [
                {
                    "id": "org-106",
                    "name": "JEOL (UK) Ltd"
                }
            ],
            "relatedLots": [
                "1"
            ]
        }
    ],
    "contracts": [
        {
            "id": "NCA31130-1",
            "awardID": "NCA31130-1",
            "status": "active",
            "value": {
                "amount": 2398869,
                "currency": "GBP"
            },
            "dateSigned": "2026-02-19T00:00:00Z"
        }
    ],
    "language": "EN",
    "description": "(SC Ref:825231)",
    "bids": {
        "statistics": [
            {
                "id": "251",
                "measure": "bids",
                "value": 1,
                "relatedLot": "1"
            },
            {
                "id": "252",
                "measure": "smeBids",
                "value": 0,
                "relatedLot": "1"
            },
            {
                "id": "253",
                "measure": "foreignBidsFromEU",
                "value": 0,
                "relatedLot": "1"
            },
            {
                "id": "254",
                "measure": "foreignBidsFromNonEU",
                "value": 1,
                "relatedLot": "1"
            },
            {
                "id": "255",
                "measure": "electronicBids",
                "value": 1,
                "relatedLot": "1"
            }
        ]
    },
    "links": [
        {
            "rel": "canonical",
            "href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000825231"
        }
    ],
    "noticetype": "OJEU - F3 - Contract Award Notice"
}