---
title: "Cubicles"
ocid: "ocds-h6vhtk-028ccb"
canonical_url: "https://d3tenders.com/contract/?ocid=ocds-h6vhtk-028ccb"
markdown_url: "https://d3tenders.com/contract/ocds-h6vhtk-028ccb.md"
json_url: "https://d3tenders.com/contract/ocds-h6vhtk-028ccb.json"
source: "Find A Tender Service"
current_stage: "Award"
buyer: "NORTHERN LIGHTHOUSE BOARD"
published: "2021-08-12"
---

# Cubicles

Buyer: NORTHERN LIGHTHOUSE BOARD  
Current stage: Award  
OCID: ocds-h6vhtk-028ccb

[View canonical contract page](https://d3tenders.com/contract/?ocid=ocds-h6vhtk-028ccb)  
[Download OCDS JSON](https://d3tenders.com/contract/ocds-h6vhtk-028ccb.json)

## Summary

The Northern Lighthouse Board is seeking bids for a contract titled "Cubicles," primarily focused on the supply of cubicles for use in lighthouses across Scotland. This procurement falls under the goods category, with an estimated contract value of £317,000, and is being conducted through an open procedure. The tender process is currently active, and submissions are due by 22 February 2021. The successful supplier will be required to provide an array of cubicles over a contract period of four years, standardising essential equipment to assist Lighthouse Technicians with maintenance tasks.

This contract presents a valuable opportunity for small and medium enterprises (SMEs) specialising in manufacturing or supplying goods related to electrical engineering or infrastructure. Businesses that can meet the specific technical requirements outlined in the tender documents should consider participating in this procurement process, especially those experienced in producing stainless steel components and capable of adhering to environmental standards for equipment used in marine environments. Engaging in this tender could lead to long-term partnerships with the Northern Lighthouse Board, thus fostering business growth in the maritime sector.

## Notice

The Northern Lighthouse Board have a requirement for the following cubicles for a period of 4 years. AtoN RTU Monitoring Cubicles, Solar Regulator Cubicles, Auxiliary Battery Solar Regulator Cubicles, Auxiliary Battery Charger - Type 1 Cubicles The requirement is to standardise equipment within the lighthouses which will assist NLB Technicians with the maintenance. Please refer to the tender documents for the full specification and requirements

### Lot Information

Lot 1

Specification of Requirements The Northern Lighthouse Board have a requirement for the following cubicles for a period of 4 years. The requirement is to standardise equipment within the lighthouses which will assist NLB Technicians with the maintenance. AtoN RTU Monitoring Cubicles The estimated quantity is Thirty Three (33) units. 9 per year for a period of 3 years. Thereafter 6 units in year 4. The specification is based on the following information; tenderers must highlight any areas that their proposal would not meet. *Drawings (E-GEN-612 and E-GEN-613) *Bill of Quantities Drawing (E-GEN-614) Solar Regulator Cubicles The estimated quantity is Thirty Six (36) units. 10 per year for a period of 3 years. Thereafter 6 units in year 4. The specification is based on the following information; tenderers must highlight any areas that their proposal would not meet. *Drawings (E-GEN-617, E-GEN-618 and E-GEN-620) *Bill of Quantities Drawing (E-GEN-619) Auxiliary Battery Solar Regulator Cubicles The estimated quantity is Eighteen (18) units. 5 per year for a period of 3 years. Thereafter 3 units in year 4. The specification is based on the following information; tenderers must highlight any areas that their proposal would not meet. *Drawings (E-GEN-621, E-GEN-622 and E-GEN-624) *Bill of Quantities Drawing (E-GEN-623) Auxiliary Battery Charger - Type 1 Cubicles The estimated quantity is Forty (40) units. 10 per year for a period of 4 years. The specification is based on the following information; tenderers must highlight any areas that their proposal would not meet. *Drawings (E-GEN-597, E-GEN-598 and E-GEN-625) *Bill of Quantities Drawing (E-GEN-599) Each cubicle shall contain the items shown on the appropriate bill of quantities, mounted on din rail, and wired according to the appropriate wiring diagram. The cubicle will meet the following specifications: 1. The cubicle framework, doors, covers, etc. are to be manufactured from stainless steel type 316. 2. All doors and removable covers are to be fitted with foam rubber jointing or equivalent to form a dust-tight seal. 3. Earth bar with identity strips showing internal and external fittings. 4. External labels are to be permanently fixed to the enclosure and shall be indelible. 5. Internal labels are to be traffolite, black letters on a white background and screwed to the back plate, or an adhesive of sufficient cohesion to be permanent. 6. All components are to be fixed to the backplate using the requisite size of stainless steel screw. Fixing holes should be tapped to facilitate easy removal of the component should this become necessary. 7. Loop connections made by two conductors in one crimped terminal are not acceptable. 8. All cables terminating at wire clamp terminals are to have suitably rated insulated bootlace ferrules. 9. All cables terminating at stud or screw connections are to have suitably rated PIDG, Bootlace Ferule or Solistrand crimped Ring Terminals and be correctly sized for the CSA of the cable. 10. The cubicle is to be lockable. The door hinges shall be hinged on the left hand unless specifically requested otherwise. Drawings EN-GEN-599, 614, 619 and 623 will also show items that will be free issued by NLB. NLB will undertake Factory Acceptance Testing and the manufacturer shall make available a suitable power supply for this. The FATs are to be agreed but it is envisaged shall consist of a full point to point check and confirm correct operation of all power convertors and power circuits

## Key Details

| Field | Value |
| --- | --- |
| Publication source | Find A Tender Service |
| Latest notice | https://www.find-tender.service.gov.uk/Notice/019630-2021 |
| Notice type | Tender Notice |
| Procurement type | Standard |
| Procurement category | Goods |
| Procurement method | Open |
| Procurement method details | Open procedure |
| Tender suitability | Not specified |
| Awardee scale | SME |
| All stages | Tender, Award |

## Dates

| Field | Value |
| --- | --- |
| Publication date | 12 Aug 2021 |
| Submission deadline | 22 Feb 2021 |
| Future notice date | Not specified |
| Award date | 10 Aug 2021 |
| Contract period | Not specified |
| Recurrence | 4 to 5 years |

## Values

| Field | Value |
| --- | --- |
| Tender value | £317,000 |
| Lots value | £317,000 |
| Awards value | Not specified |
| Contracts value | £111,411 |

## Status

| Field | Value |
| --- | --- |
| Tender status | Complete |
| Lots status | Cancelled |
| Awards status | Active |
| Contracts status | Active |

## Buyer

| Field | Value |
| --- | --- |
| Main buyer | NORTHERN LIGHTHOUSE BOARD |
| Locality | EDINBURGH |
| Post town | Edinburgh |
| Postcode | EH2 3DA |
| Country | Scotland |
| ITL 1 | TLM Scotland |
| ITL 2 | TLM1 East Central Scotland |
| ITL 3 | TLM13 City of Edinburgh |
| Local authority | City of Edinburgh |
| Electoral ward | City Centre |
| Westminster constituency | Edinburgh North and Leith |
| Delivery location | TLM Scotland |

## Supplier

| Field | Value |
| --- | --- |
| Number of suppliers | 1 |
| Supplier names | JGC ENGINEERING & TECHNICAL SERVICES |

## CPV Codes

### Divisions

- 44 - Construction structures and materials; auxiliary products to construction (except electric apparatus)

### Codes

- 44211200 - Cubicles

## Release History

- 12 Aug 2021 at 15:15 - Award - Award Notice - https://www.find-tender.service.gov.uk/Notice/019630-2021
- 22 Jan 2021 at 18:32 - Tender - Tender Notice - https://www.find-tender.service.gov.uk/Notice/001397-2021

## Notice URLs

- https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=618428155
- https://www.delta-esourcing.com/tenders/UK-UK-Edinburgh:-Cubicles./9XAB533ZQP
- https://www.nlb.org.uk/

## Provenance

This Markdown file is an alternate public rendering of the D3 Tenders contract record. The canonical page is https://d3tenders.com/contract/?ocid=ocds-h6vhtk-028ccb. The underlying structured data is available as OCDS JSON at https://d3tenders.com/contract/ocds-h6vhtk-028ccb.json.