Notice Information
Notice Title
Dust and Fume Extraction System for Materials Processing Facility
Notice Description
This tender is for the design, supply, and install of dust and fume extraction facilities to service the institutes materials processing facilities that will consist of, laboratory / pilot size ball mill, hammer mill jaw crusher and shredder. The unit sizes are typically 50-100 kg per hour and will process raw materials and recycled materials. These will be ores with metallic content or waste streams containing metallics. To further ensure the requirements of such an installation, we ask that you specify procedures to ensure that the provision will comply with ALL relevant UK Standards, Codes of Practice, Industry Best Practice and all legislative drivers including the wide remit of Health and Safety requirements needed to deliver a fully compliant project, we ask that you advise us what standards and specifications are being worked to in order to achieve full compliance . Your demonstration of this will be a section that carries a score towards the final figure. All and every service and utility needed to fully run the extraction facility will be identified within the bid, and typical floor space required for adequate installation provision etc, specifically relating to the exact requirements of elements such as, but definitely not limited to: * Equipment electrical rating and loadings * Compressed air requirements, pressures, volumes and condition (Pressure systems) * Drainage and water supply provision * Fresh air supply needs * Every and all other required services should also be stated * Installation footprint * Weight of installation and if required, any possible point load issues * I.T. requirements and connections * Lead in times, install programme and commissioning schedule We also expect a prepared methodology or statement to demonstrate how you will comply with all Health & Safety legislations and as you will be the Principal Designer and Principal Contractor under CDM Regulations, how you will fulfil the roles.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-b5fd17-3a0d1564-e189-4c18-9e3a-59f2883df533
- Publication Source
- Contracts Finder
- Latest Notice
- https://www.contractsfinder.service.gov.uk/Notice/1c38cda2-8560-4ab9-9f29-0096c6e404b7
- Current Stage
- Tender
- All Stages
- Tender
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Open
- Procurement Method Details
- Open procedure (above threshold)
- Tender Suitability
- SME, VCSE
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
45 - Construction work
-
- CPV Codes
45000000 - Construction work
Notice Value(s)
- Tender Value
- £50,000 Under £100K
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 21 Feb 20233 years ago
- Submission Deadline
- 17 Mar 2023Expired
- Future Notice Date
- Not specified
- Award Date
- Not specified
- Contract Period
- 2 Apr 2023 - 31 Aug 2023 1-6 months
- Recurrence
- Not specified
Notice Status
- Tender Status
- Active
- Lots Status
- Not Specified
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- MATERIALS PROCESSING INSTITUTE
- Contact Name
- Not specified
- Contact Email
- paul.kitson@mpiuk.com
- Contact Phone
- 01642382000
Buyer Location
- Locality
- MIDDLESBROUGH
- Postcode
- TS6 6US
- Post Town
- Cleveland
- Country
- England
-
- Major Region (ITL 1)
- TLC North East (England)
- Basic Region (ITL 2)
- TLC3 Tees Valley
- Small Region (ITL 3)
- TLC32 South Teesside
- Delivery Location
- Not specified
-
- Local Authority
- Redcar and Cleveland
- Electoral Ward
- South Bank
- Westminster Constituency
- Redcar
Further Information
Notice Documents
-
https://www.contractsfinder.service.gov.uk/Notice/1c38cda2-8560-4ab9-9f29-0096c6e404b7
21st February 2023 - Opportunity notice on Contracts Finder
Notice URLs
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-b5fd17-3a0d1564-e189-4c18-9e3a-59f2883df533-2023-02-21T08:03:11Z",
"date": "2023-02-21T08:03:11Z",
"ocid": "ocds-b5fd17-3a0d1564-e189-4c18-9e3a-59f2883df533",
"language": "en",
"initiationType": "tender",
"tender": {
"id": "MPI005/2023",
"title": "Dust and Fume Extraction System for Materials Processing Facility",
"description": "This tender is for the design, supply, and install of dust and fume extraction facilities to service the institutes materials processing facilities that will consist of, laboratory / pilot size ball mill, hammer mill jaw crusher and shredder. The unit sizes are typically 50-100 kg per hour and will process raw materials and recycled materials. These will be ores with metallic content or waste streams containing metallics. To further ensure the requirements of such an installation, we ask that you specify procedures to ensure that the provision will comply with ALL relevant UK Standards, Codes of Practice, Industry Best Practice and all legislative drivers including the wide remit of Health and Safety requirements needed to deliver a fully compliant project, we ask that you advise us what standards and specifications are being worked to in order to achieve full compliance . Your demonstration of this will be a section that carries a score towards the final figure. All and every service and utility needed to fully run the extraction facility will be identified within the bid, and typical floor space required for adequate installation provision etc, specifically relating to the exact requirements of elements such as, but definitely not limited to: * Equipment electrical rating and loadings * Compressed air requirements, pressures, volumes and condition (Pressure systems) * Drainage and water supply provision * Fresh air supply needs * Every and all other required services should also be stated * Installation footprint * Weight of installation and if required, any possible point load issues * I.T. requirements and connections * Lead in times, install programme and commissioning schedule We also expect a prepared methodology or statement to demonstrate how you will comply with all Health & Safety legislations and as you will be the Principal Designer and Principal Contractor under CDM Regulations, how you will fulfil the roles.",
"datePublished": "2023-02-21T08:03:11Z",
"status": "active",
"classification": {
"scheme": "CPV",
"id": "45000000",
"description": "Construction work"
},
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"postalCode": "TS6 6US"
}
]
}
],
"value": {
"amount": 50000,
"currency": "GBP"
},
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure (above threshold)",
"tenderPeriod": {
"endDate": "2023-03-17T13:00:00Z"
},
"contractPeriod": {
"startDate": "2023-04-03T00:00:00+01:00",
"endDate": "2023-08-31T23:59:59+01:00"
},
"suitability": {
"sme": true,
"vcse": true
},
"mainProcurementCategory": "works",
"documents": [
{
"id": "1",
"documentType": "tenderNotice",
"description": "Opportunity notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/1c38cda2-8560-4ab9-9f29-0096c6e404b7",
"datePublished": "2023-02-21T08:03:11Z",
"format": "text/html",
"language": "en"
}
]
},
"parties": [
{
"id": "GB-SRS-supplierregistration.cabinetoffice.gov.uk/D88F9w84",
"name": "MATERIALS PROCESSING INSTITUTE",
"identifier": {
"legalName": "MATERIALS PROCESSING INSTITUTE",
"scheme": "GB-SRS",
"id": "supplierregistration.cabinetoffice.gov.uk/D88F9w84"
},
"address": {
"streetAddress": "Eston Road, Grangetown",
"locality": "MIDDLESBROUGH",
"postalCode": "TS6 6US",
"countryName": "England"
},
"contactPoint": {
"email": "paul.kitson@mpiuk.com",
"telephone": "01642382000"
},
"details": {
"url": "https://www.mpiuk.com/"
},
"roles": [
"buyer"
]
}
],
"buyer": {
"id": "GB-SRS-supplierregistration.cabinetoffice.gov.uk/D88F9w84",
"name": "MATERIALS PROCESSING INSTITUTE"
}
}