Notice Information
Notice Title
SUPPLY AND INSTALLATION OF A HYBRID ULTRASONIC ASSISTED HIGH SPEED MACHINING CENTRE (ESIF FUNDED)
Notice Description
TENDER FOR THE SUPPLY AND INSTALLATION OF A HYBRID ULTRASONIC ASSISTED HIGH SPEED MACHINING CENTRE. REFERENCE: SC6834/18 This project is funded by the European Structural Investment Funds (ESIF) and the procurement is dependent on the final funding agreement. The University of Birmingham invites tenders for supply of a hybrid ultrasonic assisted high speed machining centre. The machine tool will form part of a physical demonstrator, i.e. facilities created as part of the ESIF project, which will be used to facilitate/support the take-up of high impact manufacturing technologies by the SMEs in West Midlands. In this context, the machine tool will be used to develop new applications for the technology in collaboration with technology providers and undertake feasibility studies and pilot projects to address the specific requirements of local SMEs. Therefore, it will be required as part of the project to build strong partnerships with the technology providers and define a joint co-funded R&D programme for the benefits of local businesses. The machine tool should be capable of operating as a high speed 5-axis vertical machining centre for realising a range of conventional machining operations with high accuracy and repeatability, i.e. milling and drilling as well as perform hybrid ultrasonic assisted cutting on hard/brittle/abrasive materials such as ceramics, hardened alloys and composites. The machine should have high performance linear X/Y/Z drives and precise NC controlled swivel/rotary table. It should also include fast automatic tool changing capability with storage magazine capacity for at least 20 tools. The ultrasonic transducer must be integrated within the spindle system and be capable of generating axial vibrations with frequencies of at least 20 kHz and corresponding amplitudes of up to 10 m. The system should also have automatic resonance frequency finding capability and vibration amplitude setting / detection. Cutting fluid can be delivered both internally through the spindle as well as externally. The machine tool should have a PC-based controller that supports G-code programming, the execution of full 5-axis processing strategies and ultrasonic parameter setting. Finally, the machine tool should incorporate hardware and software tools for workpiece and cutting tool measurement / setup. Overall budget for this item is up to PS396,000.00 excluding VAT. Additional information: All main correspondence should go via the University's In-Tend website. Your tender documents and information must be submitted via In-Tend by the date and time specified; http://www.in-tendhost.com/universityofbirmingham Is a Recurrent Procurement Type? : No
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-b5fd17-8bc759bd-a9fa-4a87-823d-09d1ef9288d5
- Publication Source
- Contracts Finder
- Latest Notice
- https://www.contractsfinder.service.gov.uk/Notice/80bab31a-9cd9-4f3d-9843-7aabd1e14189
- Current Stage
- Tender
- All Stages
- Tender
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Open
- Procurement Method Details
- Open procedure (above threshold)
- Tender Suitability
- SME
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
42 - Industrial machinery
-
- CPV Codes
42610000 - Machine tools operated by laser and machining centres
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 4 Dec 20187 years ago
- Submission Deadline
- 9 Jan 2019Expired
- Future Notice Date
- Not specified
- Award Date
- Not specified
- Contract Period
- 4 Feb 2019 - 14 Jun 2019 1-6 months
- Recurrence
- Not specified
Notice Status
- Tender Status
- Active
- Lots Status
- Not Specified
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNIVERSITY OF BIRMINGHAM
- Contact Name
- Susanna Ting
- Contact Email
- s.y.ting@bham.ac.uk
- Contact Phone
- 01214145389
Buyer Location
- Locality
- EDGBASTON
- Postcode
- B15 2TT
- Post Town
- Birmingham
- Country
- England
-
- Major Region (ITL 1)
- TLG West Midlands (England)
- Basic Region (ITL 2)
- TLG3 West Midlands
- Small Region (ITL 3)
- TLG31 Birmingham
- Delivery Location
- TLG West Midlands (England)
-
- Local Authority
- Birmingham
- Electoral Ward
- Edgbaston
- Westminster Constituency
- Birmingham Edgbaston
Further Information
Notice Documents
-
https://www.contractsfinder.service.gov.uk/Notice/80bab31a-9cd9-4f3d-9843-7aabd1e14189
4th December 2018 - Opportunity notice on Contracts Finder -
https://in-tendhost.co.uk/universityofbirmingham/aspx/
Additional information on how to apply for this contract
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-b5fd17-8bc759bd-a9fa-4a87-823d-09d1ef9288d5-2018-12-04T11:54:27Z",
"date": "2018-12-04T11:54:27Z",
"ocid": "ocds-b5fd17-8bc759bd-a9fa-4a87-823d-09d1ef9288d5",
"language": "en",
"initiationType": "tender",
"tender": {
"id": "SC6834/18",
"title": "SUPPLY AND INSTALLATION OF A HYBRID ULTRASONIC ASSISTED HIGH SPEED MACHINING CENTRE (ESIF FUNDED)",
"description": "TENDER FOR THE SUPPLY AND INSTALLATION OF A HYBRID ULTRASONIC ASSISTED HIGH SPEED MACHINING CENTRE. REFERENCE: SC6834/18 This project is funded by the European Structural Investment Funds (ESIF) and the procurement is dependent on the final funding agreement. The University of Birmingham invites tenders for supply of a hybrid ultrasonic assisted high speed machining centre. The machine tool will form part of a physical demonstrator, i.e. facilities created as part of the ESIF project, which will be used to facilitate/support the take-up of high impact manufacturing technologies by the SMEs in West Midlands. In this context, the machine tool will be used to develop new applications for the technology in collaboration with technology providers and undertake feasibility studies and pilot projects to address the specific requirements of local SMEs. Therefore, it will be required as part of the project to build strong partnerships with the technology providers and define a joint co-funded R&D programme for the benefits of local businesses. The machine tool should be capable of operating as a high speed 5-axis vertical machining centre for realising a range of conventional machining operations with high accuracy and repeatability, i.e. milling and drilling as well as perform hybrid ultrasonic assisted cutting on hard/brittle/abrasive materials such as ceramics, hardened alloys and composites. The machine should have high performance linear X/Y/Z drives and precise NC controlled swivel/rotary table. It should also include fast automatic tool changing capability with storage magazine capacity for at least 20 tools. The ultrasonic transducer must be integrated within the spindle system and be capable of generating axial vibrations with frequencies of at least 20 kHz and corresponding amplitudes of up to 10 m. The system should also have automatic resonance frequency finding capability and vibration amplitude setting / detection. Cutting fluid can be delivered both internally through the spindle as well as externally. The machine tool should have a PC-based controller that supports G-code programming, the execution of full 5-axis processing strategies and ultrasonic parameter setting. Finally, the machine tool should incorporate hardware and software tools for workpiece and cutting tool measurement / setup. Overall budget for this item is up to PS396,000.00 excluding VAT. Additional information: All main correspondence should go via the University's In-Tend website. Your tender documents and information must be submitted via In-Tend by the date and time specified; http://www.in-tendhost.com/universityofbirmingham Is a Recurrent Procurement Type? : No",
"datePublished": "2018-11-27T16:26:34Z",
"status": "active",
"classification": {
"scheme": "CPV",
"id": "42610000",
"description": "Machine tools operated by laser and machining centres"
},
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"postalCode": "B15 2TT"
},
{
"region": "West Midlands",
"countryName": "United Kingdom"
},
{
"postalCode": "B15 2TT"
},
{
"region": "West Midlands",
"countryName": "United Kingdom"
},
{
"postalCode": "B15 2TT"
},
{
"region": "West Midlands",
"countryName": "United Kingdom"
}
]
}
],
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure (above threshold)",
"tenderPeriod": {
"endDate": "2019-01-09T23:59:59Z"
},
"contractPeriod": {
"startDate": "2019-02-04T00:00:00Z",
"endDate": "2019-06-14T23:59:59+01:00"
},
"suitability": {
"sme": true,
"vcse": false
},
"mainProcurementCategory": "goods",
"documents": [
{
"id": "1",
"documentType": "tenderNotice",
"description": "Opportunity notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/80bab31a-9cd9-4f3d-9843-7aabd1e14189",
"datePublished": "2018-12-04T11:54:27Z",
"format": "text/html",
"language": "en",
"dateModified": "2018-12-04T11:54:27Z"
},
{
"id": "2",
"documentType": "tenderNotice",
"description": "Additional information on how to apply for this contract",
"url": "https://in-tendhost.co.uk/universityofbirmingham/aspx/"
}
]
},
"parties": [
{
"id": "GB-CFS-41974",
"name": "University of Birmingham",
"identifier": {
"legalName": "University of Birmingham"
},
"address": {
"streetAddress": "Edgbaston, Edgbaston",
"locality": "Edgbaston",
"postalCode": "B15 2TT",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Susanna Ting",
"email": "s.y.ting@bham.ac.uk",
"telephone": "01214145389"
},
"roles": [
"buyer"
]
}
],
"buyer": {
"id": "GB-CFS-41974",
"name": "University of Birmingham"
}
}