Notice Information
Notice Title
Tender for the Supply and Installation of Magnetic Alignment Presses (1 Axial and 1 Transverse) to the University of Birmingham
Notice Description
This project is funded by the UK Research and Innovation (UKRI) Industrial Strategy Challenge Fund; Driving the Electric Revolution. The University of Birmingham invites tenders for supplying production-scale magnetic powder alignment presses (both axial and transverse modes) for research purposes in the field of permanent magnet processing. The proposed units will allow magnetic powders to be aligned and compacted in an nitrogen atmosphere before a sintering stage. Note, due to space requirements of the system, the proposed alignment presses will be installed at Tyesley Energy Park in Birmingham.
Lot Information
Lot 1
The University of Birmingham invites tenders for the supply of powder pressing equipment capable of consolidating fine NdFeB powder under both transverse and axial magnetic aligning fields. It is important that the powder is not exposed to air, oxygen or moisture during the loading, compaction and unloading steps. Electric presses are preferred but hydraulic ones will be considered. Automatic feeding control is preferred. The equipment must comply with all the relevant UK law, regulations, and British Standards; see Appendix 6, Guidance Notes. Specification i. Transverse Alignment Press An All-electric Transverse Magnetic Field Forming press capable of a maximum pressing force of 450 kN (~45 tons), with a filling depth of up to 120 mm and filling weight of up to 500 grams of NdFeB per pressing event. This action should produce green compacts with densities of up to 4.3 g/cm3. A magnetising field of up to 1.8 T will operate during the pressing action. The equipment should comprise of: * An unloading glove box, containing nitrogen gas and
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-032688
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/015370-2022
- Current Stage
- Award
- All Stages
- Tender, Award
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- SME
Common Procurement Vocabulary (CPV)
- CPV Divisions
31 - Electrical machinery, apparatus, equipment and consumables; lighting
42 - Industrial machinery
-
- CPV Codes
31630000 - Magnets
42636000 - Presses
Notice Value(s)
- Tender Value
- £310,000 £100K-£500K
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £361,600 £100K-£500K
Notice Dates
- Publication Date
- 1 Jun 20223 years ago
- Submission Deadline
- 26 Apr 2022Expired
- Future Notice Date
- Not specified
- Award Date
- 29 May 20223 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Cancelled
- Awards Status
- Active
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNIVERSITY OF BIRMINGHAM
- Contact Name
- Susanna Ting
- Contact Email
- s.y.ting@bham.ac.uk
- Contact Phone
- Not specified
Buyer Location
- Locality
- BIRMINGHAM
- Postcode
- B15 2TT
- Post Town
- Birmingham
- Country
- England
-
- Major Region (ITL 1)
- TLG West Midlands (England)
- Basic Region (ITL 2)
- TLG3 West Midlands
- Small Region (ITL 3)
- TLG31 Birmingham
- Delivery Location
- TLG31 Birmingham
-
- Local Authority
- Birmingham
- Electoral Ward
- Edgbaston
- Westminster Constituency
- Birmingham Edgbaston
Further Information
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-032688-2022-06-01T14:55:20+01:00",
"date": "2022-06-01T14:55:20+01:00",
"ocid": "ocds-h6vhtk-032688",
"initiationType": "tender",
"tender": {
"id": "SC10515/22",
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
},
"title": "Tender for the Supply and Installation of Magnetic Alignment Presses (1 Axial and 1 Transverse) to the University of Birmingham",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "42636000",
"description": "Presses"
},
"mainProcurementCategory": "goods",
"description": "This project is funded by the UK Research and Innovation (UKRI) Industrial Strategy Challenge Fund; Driving the Electric Revolution. The University of Birmingham invites tenders for supplying production-scale magnetic powder alignment presses (both axial and transverse modes) for research purposes in the field of permanent magnet processing. The proposed units will allow magnetic powders to be aligned and compacted in an nitrogen atmosphere before a sintering stage. Note, due to space requirements of the system, the proposed alignment presses will be installed at Tyesley Energy Park in Birmingham.",
"value": {
"amount": 310000,
"currency": "GBP"
},
"lots": [
{
"id": "1",
"description": "The University of Birmingham invites tenders for the supply of powder pressing equipment capable of consolidating fine NdFeB powder under both transverse and axial magnetic aligning fields. It is important that the powder is not exposed to air, oxygen or moisture during the loading, compaction and unloading steps. Electric presses are preferred but hydraulic ones will be considered. Automatic feeding control is preferred. The equipment must comply with all the relevant UK law, regulations, and British Standards; see Appendix 6, Guidance Notes. Specification i. Transverse Alignment Press An All-electric Transverse Magnetic Field Forming press capable of a maximum pressing force of 450 kN (~45 tons), with a filling depth of up to 120 mm and filling weight of up to 500 grams of NdFeB per pressing event. This action should produce green compacts with densities of up to 4.3 g/cm3. A magnetising field of up to 1.8 T will operate during the pressing action. The equipment should comprise of: * An unloading glove box, containing nitrogen gas and",
"awardCriteria": {
"criteria": [
{
"name": "Compliance to the Specifications",
"type": "quality",
"description": "55"
},
{
"name": "After Sales and Technical Back up",
"type": "quality",
"description": "10"
},
{
"name": "Delivery and Training",
"type": "quality",
"description": "10"
},
{
"name": "Sustainability and Environmental",
"type": "quality",
"description": "5"
},
{
"name": "Standard Supplier Questionnaire",
"type": "quality",
"description": "10"
},
{
"type": "price",
"description": "10"
}
]
},
"contractPeriod": {
"endDate": "2022-11-30T23:59:59Z"
},
"hasRenewal": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"hasOptions": false,
"status": "cancelled"
}
],
"items": [
{
"id": "1",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "31630000",
"description": "Magnets"
}
],
"deliveryAddresses": [
{
"region": "UKG31"
},
{
"region": "UKG31"
}
],
"relatedLot": "1"
}
],
"submissionMethod": [
"electronicSubmission"
],
"submissionMethodDetails": "http://www.in-tendhost.co.uk/universityofbirmingham/",
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure",
"coveredBy": [
"GPA"
],
"tenderPeriod": {
"endDate": "2022-04-26T11:59:00+01:00"
},
"submissionTerms": {
"languages": [
"en"
]
},
"awardPeriod": {
"startDate": "2022-04-26T12:00:00+01:00"
},
"bidOpening": {
"date": "2022-04-26T12:00:00+01:00"
},
"hasRecurrence": false
},
"parties": [
{
"id": "GB-FTS-23416",
"name": "UNIVERSITY OF BIRMINGHAM",
"identifier": {
"legalName": "UNIVERSITY OF BIRMINGHAM"
},
"address": {
"streetAddress": "Chancellors Close",
"locality": "BIRMINGHAM",
"region": "UKG31",
"postalCode": "B152TT",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Susanna Ting",
"email": "s.y.ting@bham.ac.uk",
"url": "http://www.in-tendhost.co.uk/universityofbirmingham/"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.birmingham.ac.uk/index.aspx",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "BODY_PUBLIC",
"description": "Body governed by public law"
},
{
"scheme": "COFOG",
"id": "09",
"description": "Education"
}
]
}
},
{
"id": "GB-FTS-18346",
"name": "University of Birmingham",
"identifier": {
"legalName": "University of Birmingham"
},
"address": {
"locality": "Birmingham",
"postalCode": "B15 2TT",
"countryName": "United Kingdom"
},
"contactPoint": {
"email": "s.y.ting@bham.ac.uk"
},
"roles": [
"reviewBody"
]
},
{
"id": "GB-FTS-54527",
"name": "BaiQiDa Intelligent Technology (NingBo) Co., LTD",
"identifier": {
"legalName": "BaiQiDa Intelligent Technology (NingBo) Co., LTD"
},
"address": {
"locality": "ZheJiang",
"region": "CN",
"countryName": "China"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
}
],
"buyer": {
"id": "GB-FTS-23416",
"name": "UNIVERSITY OF BIRMINGHAM"
},
"language": "en",
"awards": [
{
"id": "015370-2022-1",
"relatedLots": [
"1"
],
"status": "active",
"suppliers": [
{
"id": "GB-FTS-54527",
"name": "BaiQiDa Intelligent Technology (NingBo) Co., LTD"
}
]
}
],
"contracts": [
{
"id": "015370-2022-1",
"awardID": "015370-2022-1",
"status": "active",
"value": {
"amount": 361600,
"currency": "GBP"
},
"dateSigned": "2022-05-30T00:00:00+01:00"
}
],
"bids": {
"statistics": [
{
"id": "1",
"measure": "bids",
"relatedLot": "1",
"value": 1
}
]
}
}