450000

{
    "tag": [
        "compiled"
    ],
    "id": "ocds-h6vhtk-0356ae-2022-08-23T16:11:49+01:00",
    "date": "2022-08-23T16:11:49+01:00",
    "ocid": "ocds-h6vhtk-0356ae",
    "description": "The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.The Authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the Authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise. The link below to the Gov.uk website provides information on the Government Security Classification. https://www.gov.uk/government/publications/government-security-classification The Contracting Authority intends to use an e-Tendering system in this procurement exercise, please visit www.contracts.mod.uk for full details and to register your interest in this procurement. The procurement has a security classification of Official Sensitive. The Cyber Risk Profile for this requirement identified by the Cyber Risk Assessment is Not Applicable (Reference - RAR-977771509).",
    "initiationType": "tender",
    "tender": {
        "id": "ocds-h6vhtk-0356ae",
        "legalBasis": {
            "id": "32009L0081",
            "scheme": "CELEX"
        },
        "title": "450000",
        "status": "active",
        "classification": {
            "scheme": "CPV",
            "id": "80650000",
            "description": "Training and simulation in aircrafts, missiles and spacecrafts"
        },
        "additionalClassifications": [
            {
                "scheme": "CPV",
                "id": "80533000",
                "description": "Computer-user familiarisation and training services"
            },
            {
                "scheme": "TED_SERVICE_CATEGORY_DEFENCE",
                "id": "3",
                "description": "Defence services, military defence services and civil defence services"
            }
        ],
        "mainProcurementCategory": "services",
        "description": "The Defence Equipment and Support (DE&S) Special Projects Multi Air Platforms Team has a requirement for the procurement of 2 x classroom -based Avionics Systems and Procedural Trainers (ASPT) to assist aircrew personnel training. This requirement shall also include in-service support and maintenance for the duration of the contract.",
        "value": {
            "amount": 450000,
            "currency": "GBP"
        },
        "hasOptions": true,
        "options": {
            "description": "The Contract has an anticipated duration of Five (5) years with an additional 2x1 year Options from Contract Award. The final confirmed duration including any Contractual Option (s), and/or break points will be provided in the Invitation to Tender documentation."
        },
        "hasRenewal": false,
        "contractPeriod": {
            "startDate": "2022-12-30T00:00:00Z",
            "endDate": "2030-03-31T23:59:59+01:00"
        },
        "items": [
            {
                "id": "0",
                "deliveryAddresses": [
                    {
                        "region": "UK"
                    }
                ],
                "deliveryLocation": {
                    "description": "United Kingdom"
                }
            }
        ],
        "subcontracting": {
            "description": "The tenderer has to indicate in the tender any share of the contract it may intend to subcontract to third parties and any proposed subcontractor, as well as the subject-matter of the subcontracts for which they are proposed. The tenderer has to indicate any change occurring at the level of subcontractors during the execution of the contract."
        },
        "submissionTerms": {
            "variantPolicy": "notAllowed",
            "depositsGuarantees": "The Authority may require a Parent Company Guarantee at it's sole discretion.",
            "languages": [
                "en"
            ]
        },
        "submissionMethod": [
            "electronicSubmission",
            "written"
        ],
        "submissionMethodDetails": "https://contracts.mod.uk/esop/guest/go/opportunity/detail?opportunityId=54532",
        "selectionCriteria": {
            "criteria": [
                {
                    "type": "suitability",
                    "description": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\" Suppliers Instructions How to Express Interest in this Tender: 1. Register your company on the eSourcing portal (this is only required once) - Browse to the eSourcing Portal - Click the \"Click here to register\" link - Accept the terms and conditions and click \"continue\" - Enter your correct business and user details - Note the username you chose and click \"Save\" when complete - You will shortly receive an email with your unique password (please keep this secure) 2. Express an Interest in the tender - Login to the portal with the username/password - Click the \"PQQs Open to All Suppliers\" link. (These are Pre-Qualification Questionnaires open to any registered supplier) - Click on the relevant PQQ to access the content. - Click the \"Express Interest\" button in the \"Actions\" box on the left-hand side of the page. - This will move the PQQ into your \"My PQQs\" page. (This is a secure area reserved for your projects only) - Click on the PQQ code, you can now access any attachments by clicking the \"Settings and Buyer Attachments\" in the \"Actions\" box 3. Responding to the tender - You can now choose to \"Reply\" or \"Reject\" (please give a reason if rejecting) - You can now use the 'Messages' function to communicate with the buyer and seek any clarification - Note the deadline for completion, then follow the onscreen instructions to complete the PQQ - There may be a mixture of online & offline actions for you to perform (there is detailed online help available) If you require any further assistance please consult the online help, or contact the eTendering help desk.",
                    "appliesTo": [
                        "supplier"
                    ]
                },
                {
                    "type": "suitability",
                    "description": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\" Suppliers Instructions How to Express Interest in this Tender: 1. Register your company on the eSourcing portal (this is only required once) - Browse to the eSourcing Portal - Click the \"Click here to register\" link - Accept the terms and conditions and click \"continue\" - Enter your correct business and user details - Note the username you chose and click \"Save\" when complete - You will shortly receive an email with your unique password (please keep this secure) 2. Express an Interest in the tender - Login to the portal with the username/password - Click the \"PQQs Open to All Suppliers\" link. (These are Pre-Qualification Questionnaires open to any registered supplier) - Click on the relevant PQQ to access the content. - Click the \"Express Interest\" button in the \"Actions\" box on the left-hand side of the page. - This will move the PQQ into your \"My PQQs\" page. (This is a secure area reserved for your projects only) - Click on the PQQ code, you can now access any attachments by clicking the \"Settings and Buyer Attachments\" in the \"Actions\" box 3. Responding to the tender - You can now choose to \"Reply\" or \"Reject\" (please give a reason if rejecting) - You can now use the 'Messages' function to communicate with the buyer and seek any clarification - Note the deadline for completion, then follow the onscreen instructions to complete the PQQ - There may be a mixture of online & offline actions for you to perform (there is detailed online help available) If you require any further assistance please consult the online help, or contact the eTendering help desk.",
                    "appliesTo": [
                        "subcontractor"
                    ]
                },
                {
                    "type": "economic",
                    "description": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\"",
                    "minimum": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\"",
                    "appliesTo": [
                        "supplier"
                    ]
                },
                {
                    "type": "economic",
                    "description": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\"",
                    "minimum": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\" The Authority reserve the right to exclude a potential tenderer if the estimated contract value exceed 50% of the potential tenderers turn over.",
                    "appliesTo": [
                        "subcontractor"
                    ]
                },
                {
                    "type": "technical",
                    "description": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\"",
                    "minimum": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\" Potential tenderers will be scored in accordance with the criteria listed. The Authority shall pre-qualify the 5 highest scoring Potential Providers for the ITT stage. A minimum score of 10 (Satisfactory) shall be required for all scored and weighted questions, this shall be calculated as a minimum 10% weighting for inclusion in the ITT stage for this requirement. All remaining questions will be PASS/FAIL. An evaluation of a FAIL shall result in an unsuccessful result and you will not be included within the next stage of tendering for this requirement.",
                    "appliesTo": [
                        "supplier"
                    ]
                },
                {
                    "type": "technical",
                    "description": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\"",
                    "minimum": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\"",
                    "appliesTo": [
                        "subcontractor"
                    ]
                }
            ],
            "description": "As Per \"702986451A PQQ - Avionics Systems and Procedural Trainer (ASPT),\" attachments: \"Annex A - DPQQ Guidance and Evaluation Plan,\" \"Annex B - DPQQ Selection Criteria,\" \"Annex C - DPQQ Economic and Financial Standing Evaluation Criteria\" See PQQ - Potential Providers will be scored in accordance with the criteria listed and the 5 highest scoring Potential Providers will be invited to tender. Where questions are scored and weighted the following criteria will apply: 0: No Response/ Poor Response - Response is limited, it lacks detail, credibility and/or explanation, and demonstrates only a basic understanding of the requirement. Partial responses provided, not linked to the key attributes of the questions -- anecdotal in parts. The response provides limited evidence of processes, procedures, roles/responsibilities and professional competency etc. The answer contains ambiguities or deficiencies that may not be tolerated. Your inclusion in the final Tender assessment will not be included, as the minimum scoring required is 10 anything below this will be considered not compliant. 10: Satisfactory Response - Response demonstrates a satisfactory understanding of the requirement. The response outlines a level of professional competency. Response includes some key processes and procedures, linked to key attributes of the questions and demonstrates a reasonably acceptable approach that covers most areas, however, lacks depth and supporting evidence. 30: Good Response - Response is sufficiently detailed to demonstrate a good understanding of the requirement. Demonstrable approach that is clear and consistent. Processes and procedures are reasonably well explained and logical. Response is clear, verifiable and covers all key attributes of the question. 70: Very Good - Response demonstrates a strong understanding of the requirement. It provides specific details and clearly demonstrates professional competencies and works experience in relation to the question. Evidence provided to support a confidence in ability to deliver. The response identifies specific commendations/awards achieved in relation to the question being answered, that can be verified by the evaluation team. 100: Excellent Response - Response is comprehensive, unambiguous and demonstrates an excellent understanding of the requirement. Approach is detailed and includes robust and effective measures, with processes and procedures being clearly explained and perfectly logical. It provides specific details and clearly demonstrates professional competencies and relevant works experience in relation to the question. Clear and fully verifiable evidence provided that covers all attributes, providing high degree of confidence in ability to deliver. The response identifies specific commendations/awards achieved in relation to the question being answered, that can be verified by the evaluation team."
        },
        "contractTerms": {
            "otherTerms": "The Authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the Authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise."
        },
        "procurementMethod": "selective",
        "procurementMethodDetails": "Restricted",
        "secondStage": {
            "minimumCandidates": 5,
            "maximumCandidates": 5
        },
        "tenderPeriod": {
            "endDate": "2022-08-30T12:00:00+01:00"
        },
        "hasRecurrence": false,
        "reviewDetails": "30 Calendar days from the issue of this contract notice.",
        "amendments": [
            {
                "id": "1",
                "unstructuredChanges": [
                    {
                        "oldValue": {
                            "date": "2022-08-30T12:00:00+01:00"
                        },
                        "newValue": {
                            "date": "2022-09-09T15:00:00+01:00"
                        },
                        "where": {
                            "section": "II.2.1",
                            "label": "DPQQ Closing Date and Time"
                        }
                    }
                ],
                "description": "Closing date and time for Expression of Interest amended from 30/08/22 at 12:00 to 15:00 09/09/22."
            }
        ]
    },
    "parties": [
        {
            "id": "GB-FTS-60037",
            "name": "Ministry of Defence",
            "identifier": {
                "legalName": "Ministry of Defence"
            },
            "address": {
                "streetAddress": "Defence Equipment and Support, Spruce 0b #1013, MOD Abbey Wood",
                "locality": "Bristol",
                "postalCode": "BS34 8JH",
                "countryName": "United Kingdom"
            },
            "contactPoint": {
                "name": "Attn: Hodgkinson Cara",
                "email": "cara.hodgkinson101@mod.gov.uk"
            },
            "roles": [
                "buyer"
            ],
            "details": {
                "url": "https://des.mod.uk",
                "classifications": [
                    {
                        "scheme": "TED_CA_TYPE",
                        "id": "MINISTRY",
                        "description": "Ministry or any other national or federal authority, including their regional or local subdivisions"
                    },
                    {
                        "scheme": "COFOG",
                        "id": "02",
                        "description": "Defence"
                    }
                ]
            }
        },
        {
            "id": "GB-FTS-60038",
            "name": "Ministry of Defence",
            "identifier": {
                "legalName": "Ministry of Defence"
            },
            "address": {
                "streetAddress": "Defence Equipment and Support, Special Projects Multi Air Platforms (SPMAP) Project Team, MOD Abbey Wood, Spruce 0b #1013",
                "locality": "Bristol",
                "postalCode": "BS34 8JH",
                "countryName": "United Kingdom"
            },
            "contactPoint": {
                "email": "Cara.Hodgkinson101@mod.gov.uk"
            },
            "roles": [
                "reviewBody",
                "mediationBody"
            ]
        },
        {
            "id": "GB-FTS-62131",
            "name": "Ministry of Defence",
            "identifier": {
                "legalName": "Ministry of Defence"
            },
            "address": {
                "streetAddress": "Defence Equipment and Support, Special Projects Multi Air Platforms (SPMAP) Project Team, MOD Abbey Wood, Spruce 0b #1013",
                "locality": "Bristol",
                "region": "UK",
                "postalCode": "BS34 8JH",
                "countryName": "United Kingdom"
            },
            "contactPoint": {
                "name": "Cara Hodgkinson",
                "email": "cara.hodgkinson101@mod.gov.uk"
            },
            "roles": [
                "buyer"
            ],
            "details": {
                "url": "https://des.mod.uk"
            }
        }
    ],
    "buyer": {
        "id": "GB-FTS-62131",
        "name": "Ministry of Defence"
    },
    "language": "en"
}