Notice Information
Notice Title
SBRI Competition: Fusions Industry Challenges Cycle 2 Phase 1
Notice Description
This is a Small Business Research Initiative (SBRI) competition funded by the UK Atomic Energy Authority (UKAEA). The aim of the competition is to develop solutions to fusion energy challenges in two themes for key priority areas. 1. Driving up fusion power plant performance with innovative heating and cooling systems. 2. Improving fusion power plant availability with novel fusion materials, technology, and manufacture. This is phase 1 of a potential 2 phase competition. The decision to proceed with phase 2 will depend on the outcomes from phase 1 and assessment of a separate application into a subsequent phase 2 competition. Only the successful applicants from phase 1 will be invited to apply to take part in phase 2.
Lot Information
Driving up fusion power plant performance with innovative heating and cooling systems.
A Pre-Commercial Procurement Activity under SBRI Driving up fusion power plant performance with innovative heating and cooling systems. Projects can focus on one or more of the following under this theme: Microwave heating challenges: high power, long pulse microwave sources with high electrical efficiency (greater than or equal to 55%) development of special waveguide components, for example, diamond window assemblies, power monitors, expansion units, vacuum pumping access improvements on the high voltage power supplies (50kV) for reduced voltage ripple in a compact assembly while maintaining high electrical efficiency (greater than or equal to 98%) development of optical mirrors for evacuation of high thermal loads (approximately 5MW/m2) high precision optical alignment assemblies for the free space to waveguide coupling Neutral particle beam heating challenges: negative ion beam system with high electrical efficiency (greater than 60%) improved beam neutralisation efficiency, for example, Plasma or Laser Neutralisers development of residual ion energy recovery. improved negative ion source efficiency with caesium free operation reduction in scale; improved ion optics, source uniformity and power handling to reduce size of components development of actively cooled high heat flux components (approximately 5-10 MW/m2) with reactor relevant materials development of fault tolerant 1-2MV fast switching power supply systems with high electrical efficiency development of vacuum pumping systems with pumping speeds of millions of litres per second which allow continuous operation Reactor high heat flux components: jet impingement cooling technology transfer sCO2 as coolant diamond components for heat dispersion novel discrete limiter designs, for example, vaporisation layers, speed of maintenance or increased heat flux performance has context menu Additional information: https://apply-for-innovation-funding.service.gov.uk/competition/1156/overview#summary
Improving fusion power plant availability with novel fusion materials, technology, and manufacture.A Pre-Commercial Procurement Activity under SBRI Improving fusion power plant availability with novel fusion materials, technology, and manufacture Projects can focus on one or more of the following under this theme: fusion grade steels, for example, reduced activation Ferritic or Martensitic (RAFM) development, including, Castable Nanostructured Alloys (CNAs), and Oxide Dispersion Strengthened (ODS) steels liquid Metal testing, for example Li, PbLi and Pb scalable or large volume manufacture of tritium breeder materials irradiation resilient joining materials and processes, for example, Tungsten based armour materials, CuCrZr or vacuum vessel ports including fused silica, Mo, MgAl2O4, ZnS, ZnSe novel manufacture of multi-metre complex structures and components for fusion environments testing and evaluation scalable or large volume manufacture of neutron shielding materials manufacture of complex geometry components in refractory metals additive manufacture for non-water coolant components anti-corrosion coatings or novel application methods of corrosion and tritium barrier coatings for complex geometry components development of on-line activation measurements in situ health monitoring of fusion reactor components novel inspection of interfaces in complex multi-material fusion components radiation hard improvements for fusion equipment and plant novel energy conversion technology high temperature superconductors composite materials such as silicon carbide fibre, reinforced silicon carbide novel materials for radiation hard electronic components Additional information: https://apply-for-innovation-funding.service.gov.uk/competition/1156/overview#summary
Procurement Information
This was a pre-commercial procurement activity lead by Innovate UK. All information relating to the tender can be found here : Competition overview - SBRI: Fusion Industry Challenges - phase 1 - Innovation Funding Service (apply-for-innovation-funding.service.gov.uk) . An open, transparent and fair procurement process was still adhered to despite this RTM falling outside of PCR15.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-036bab
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/026987-2022
- Current Stage
- Award
- All Stages
- Award
Procurement Classification
- Notice Type
- Award Notice
- Procurement Type
- Standard
- Procurement Category
- Services
- Procurement Method
- Limited
- Procurement Method Details
- Award procedure without prior publication of a call for competition
- Tender Suitability
- Not specified
- Awardee Scale
- Large, SME
Common Procurement Vocabulary (CPV)
- CPV Divisions
73 - Research and development services and related consultancy services
-
- CPV Codes
73110000 - Research services
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £3,105,983 £1M-£10M
Notice Dates
- Publication Date
- 27 Sep 20223 years ago
- Submission Deadline
- Not specified
- Future Notice Date
- Not specified
- Award Date
- 25 Aug 20223 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Cancelled
- Awards Status
- Active
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNITED KINGDOM ATOMIC ENERGY AUTHORITY
- Contact Name
- Ioanna Bampatsia
- Contact Email
- ioanna.bampatsia@ukaea.uk
- Contact Phone
- +44 0123546
Buyer Location
- Locality
- ABINGDON
- Postcode
- OX14 3DB
- Post Town
- Oxford
- Country
- England
-
- Major Region (ITL 1)
- TLJ South East (England)
- Basic Region (ITL 2)
- TLJ1 Berkshire, Buckinghamshire and Oxfordshire
- Small Region (ITL 3)
- TLJ14 Oxfordshire CC
- Delivery Location
- TLJ14 Oxfordshire CC
-
- Local Authority
- South Oxfordshire
- Electoral Ward
- Sandford & the Wittenhams
- Westminster Constituency
- Didcot and Wantage
Further Information
Notice URLs
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-036bab-2022-09-27T09:37:06+01:00",
"date": "2022-09-27T09:37:06+01:00",
"ocid": "ocds-h6vhtk-036bab",
"initiationType": "tender",
"tender": {
"id": "T/VT073/22",
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
},
"title": "SBRI Competition: Fusions Industry Challenges Cycle 2 Phase 1",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "73110000",
"description": "Research services"
},
"mainProcurementCategory": "services",
"description": "This is a Small Business Research Initiative (SBRI) competition funded by the UK Atomic Energy Authority (UKAEA). The aim of the competition is to develop solutions to fusion energy challenges in two themes for key priority areas. 1. Driving up fusion power plant performance with innovative heating and cooling systems. 2. Improving fusion power plant availability with novel fusion materials, technology, and manufacture. This is phase 1 of a potential 2 phase competition. The decision to proceed with phase 2 will depend on the outcomes from phase 1 and assessment of a separate application into a subsequent phase 2 competition. Only the successful applicants from phase 1 will be invited to apply to take part in phase 2.",
"lots": [
{
"id": "1",
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"description": "A Pre-Commercial Procurement Activity under SBRI Driving up fusion power plant performance with innovative heating and cooling systems. Projects can focus on one or more of the following under this theme: Microwave heating challenges: high power, long pulse microwave sources with high electrical efficiency (greater than or equal to 55%) development of special waveguide components, for example, diamond window assemblies, power monitors, expansion units, vacuum pumping access improvements on the high voltage power supplies (50kV) for reduced voltage ripple in a compact assembly while maintaining high electrical efficiency (greater than or equal to 98%) development of optical mirrors for evacuation of high thermal loads (approximately 5MW/m2) high precision optical alignment assemblies for the free space to waveguide coupling Neutral particle beam heating challenges: negative ion beam system with high electrical efficiency (greater than 60%) improved beam neutralisation efficiency, for example, Plasma or Laser Neutralisers development of residual ion energy recovery. improved negative ion source efficiency with caesium free operation reduction in scale; improved ion optics, source uniformity and power handling to reduce size of components development of actively cooled high heat flux components (approximately 5-10 MW/m2) with reactor relevant materials development of fault tolerant 1-2MV fast switching power supply systems with high electrical efficiency development of vacuum pumping systems with pumping speeds of millions of litres per second which allow continuous operation Reactor high heat flux components: jet impingement cooling technology transfer sCO2 as coolant diamond components for heat dispersion novel discrete limiter designs, for example, vaporisation layers, speed of maintenance or increased heat flux performance has context menu Additional information: https://apply-for-innovation-funding.service.gov.uk/competition/1156/overview#summary",
"awardCriteria": {
"criteria": [
{
"name": "How well does the proposed idea/solution/technologies meet the challenge as detailed in the brief?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "How valid is the technical approach that will be adopted?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "How innovative is this project? To what extent does the project develop or employ novel concepts, approaches, methodologies, tools or technologies for this area?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "To what extent does the proposal show a clear plan for establishing technical and commercial feasibility and the development of a working prototype?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "To what extent does the applicant appear to have the right skills, capabilities and experience to deliver the intended benefits?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "Is there a clear commercial potential to lead to a marketable product, process or service and a clear plan to deliver that and route to market?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "How appropriate is the proposal financially? Is the overall budget realistic and justified in terms of the aims and methods proposed? Are the costs appropriate and justified?",
"type": "cost",
"description": "14.28571428571428571"
}
]
},
"hasOptions": false,
"status": "cancelled"
},
{
"id": "2",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"description": "A Pre-Commercial Procurement Activity under SBRI Improving fusion power plant availability with novel fusion materials, technology, and manufacture Projects can focus on one or more of the following under this theme: fusion grade steels, for example, reduced activation Ferritic or Martensitic (RAFM) development, including, Castable Nanostructured Alloys (CNAs), and Oxide Dispersion Strengthened (ODS) steels liquid Metal testing, for example Li, PbLi and Pb scalable or large volume manufacture of tritium breeder materials irradiation resilient joining materials and processes, for example, Tungsten based armour materials, CuCrZr or vacuum vessel ports including fused silica, Mo, MgAl2O4, ZnS, ZnSe novel manufacture of multi-metre complex structures and components for fusion environments testing and evaluation scalable or large volume manufacture of neutron shielding materials manufacture of complex geometry components in refractory metals additive manufacture for non-water coolant components anti-corrosion coatings or novel application methods of corrosion and tritium barrier coatings for complex geometry components development of on-line activation measurements in situ health monitoring of fusion reactor components novel inspection of interfaces in complex multi-material fusion components radiation hard improvements for fusion equipment and plant novel energy conversion technology high temperature superconductors composite materials such as silicon carbide fibre, reinforced silicon carbide novel materials for radiation hard electronic components Additional information: https://apply-for-innovation-funding.service.gov.uk/competition/1156/overview#summary",
"awardCriteria": {
"criteria": [
{
"name": "How well does the proposed idea/solution/technologies meet the challenge as detailed in the brief?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "How valid is the technical approach that will be adopted?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "How innovative is this project? To what extent does the project develop or employ novel concepts, approaches, methodologies, tools or technologies for this area?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "To what extent does the proposal show a clear plan for establishing technical and commercial feasibility and the development of a working prototype?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "To what extent does the applicant appear to have the right skills, capabilities and experience to deliver the intended benefits?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "Is there a clear commercial potential to lead to a marketable product, process or service and a clear plan to deliver that and route to market?",
"type": "quality",
"description": "14.28571428571428571"
},
{
"name": "How appropriate is the proposal financially? Is the overall budget realistic and justified in terms of the aims and methods proposed? Are the costs appropriate and justified?",
"type": "cost",
"description": "14.28571428571428571"
}
]
},
"hasOptions": false,
"status": "cancelled"
}
],
"items": [
{
"id": "1",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "73110000",
"description": "Research services"
}
],
"deliveryAddresses": [
{
"region": "UKJ14"
}
],
"relatedLot": "1"
},
{
"id": "2",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "73110000",
"description": "Research services"
}
],
"deliveryAddresses": [
{
"region": "UKJ14"
}
],
"relatedLot": "2"
}
],
"procurementMethod": "limited",
"procurementMethodDetails": "Award procedure without prior publication of a call for competition",
"coveredBy": [
"GPA"
],
"reviewDetails": "VI.4.2)Body responsible for mediation procedures VI.4.3)Review procedure Precise information on deadline(s) for review procedures: Pre-Commercial Procurement Activity. Not subject to Public Contract Regulation 2015.",
"procurementMethodRationaleClassifications": [
{
"scheme": "TED_PT_AWARD_CONTRACT_WITHOUT_CALL",
"id": "D_OUTSIDE_SCOPE",
"description": "The procurement falls outside the scope of application of the directive"
}
],
"procurementMethodRationale": "This was a pre-commercial procurement activity lead by Innovate UK. All information relating to the tender can be found here : Competition overview - SBRI: Fusion Industry Challenges - phase 1 - Innovation Funding Service (apply-for-innovation-funding.service.gov.uk) . An open, transparent and fair procurement process was still adhered to despite this RTM falling outside of PCR15."
},
"awards": [
{
"id": "026987-2022-1",
"relatedLots": [
"1"
],
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64332",
"name": "CAL GAVIN LIMITED"
}
]
},
{
"id": "026987-2022-2",
"relatedLots": [
"1"
],
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64333",
"name": "TWI LIMITED"
}
]
},
{
"id": "026987-2022-3",
"relatedLots": [
"1"
],
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-28692",
"name": "IDOM (UK) LIMITED"
}
]
},
{
"id": "026987-2022-4",
"relatedLots": [
"1"
],
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64334",
"name": "The University of Manchester"
}
]
},
{
"id": "026987-2022-5",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-13761",
"name": "University of Birmingham"
}
]
},
{
"id": "026987-2022-6",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64335",
"name": "FULL MATRIX LTD"
}
]
},
{
"id": "026987-2022-7",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64336",
"name": "ALLOYED LIMITED"
}
]
},
{
"id": "026987-2022-8",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64337",
"name": "QDOT TECHNOLOGY LTD"
}
]
},
{
"id": "026987-2022-9",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64338",
"name": "ASTRAL NEUTRONICS LTD"
}
]
},
{
"id": "026987-2022-10",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64339",
"name": "LASER ADDITIVE SOLUTIONS LTD"
}
]
},
{
"id": "026987-2022-11",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64340",
"name": "ARCHER TECHNICOAT LIMITED"
}
]
},
{
"id": "026987-2022-12",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64341",
"name": "OXFORD SIGMA"
}
]
},
{
"id": "026987-2022-13",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64342",
"name": "3-SCI LTD"
}
]
},
{
"id": "026987-2022-14",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64343",
"name": "FRAZER-NASH CONSULTANCY LIMITED"
}
]
},
{
"id": "026987-2022-15",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64344",
"name": "DUALITY QUANTUM PHOTONICS LTD"
}
]
},
{
"id": "026987-2022-16",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-36540",
"name": "Swansea University"
}
]
},
{
"id": "026987-2022-17",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64333",
"name": "TWI LIMITED"
}
]
},
{
"id": "026987-2022-18",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64345",
"name": "JACOBS U.K. LIMITED"
}
]
},
{
"id": "026987-2022-19",
"relatedLots": [
"2"
],
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"suppliers": [
{
"id": "GB-FTS-64346",
"name": "CASTINGS TECHNOLOGY INTERNATIONAL LIMITED"
}
]
}
],
"parties": [
{
"id": "GB-FTS-1212",
"name": "United Kingdom Atomic Energy Authority",
"identifier": {
"legalName": "United Kingdom Atomic Energy Authority",
"id": "N/A"
},
"address": {
"streetAddress": "Culham Science Centre",
"locality": "Abingdon",
"region": "UKJ14",
"postalCode": "OX14 3DB",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Ioanna Bampatsia",
"telephone": "+44 0123546",
"email": "ioanna.bampatsia@ukaea.uk"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.gov.uk/government/organisations/uk-atomic-energy-authority",
"buyerProfile": "https://uk.eu-supply.com/ctm/Company/CompanyInformation/Index/72814",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "BODY_PUBLIC",
"description": "Body governed by public law"
},
{
"scheme": "COFOG",
"description": "Fusion Research"
}
]
}
},
{
"id": "GB-FTS-64332",
"name": "CAL GAVIN LIMITED",
"identifier": {
"legalName": "CAL GAVIN LIMITED"
},
"address": {
"locality": "Alcester",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64333",
"name": "TWI LIMITED",
"identifier": {
"legalName": "TWI LIMITED"
},
"address": {
"locality": "Cambridge",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "large"
}
},
{
"id": "GB-FTS-28692",
"name": "IDOM (UK) LIMITED",
"identifier": {
"legalName": "IDOM (UK) LIMITED"
},
"address": {
"locality": "London",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "large"
}
},
{
"id": "GB-FTS-64334",
"name": "The University of Manchester",
"identifier": {
"legalName": "The University of Manchester"
},
"address": {
"locality": "Manchester",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "large"
}
},
{
"id": "GB-FTS-13761",
"name": "University of Birmingham",
"identifier": {
"legalName": "University of Birmingham"
},
"address": {
"locality": "Birmingham",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "large"
}
},
{
"id": "GB-FTS-64335",
"name": "FULL MATRIX LTD",
"identifier": {
"legalName": "FULL MATRIX LTD"
},
"address": {
"locality": "Cambridge",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64336",
"name": "ALLOYED LIMITED",
"identifier": {
"legalName": "ALLOYED LIMITED"
},
"address": {
"locality": "Yarnton",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64337",
"name": "QDOT TECHNOLOGY LTD",
"identifier": {
"legalName": "QDOT TECHNOLOGY LTD"
},
"address": {
"locality": "Thame",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64338",
"name": "ASTRAL NEUTRONICS LTD",
"identifier": {
"legalName": "ASTRAL NEUTRONICS LTD"
},
"address": {
"locality": "London",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64339",
"name": "LASER ADDITIVE SOLUTIONS LTD",
"identifier": {
"legalName": "LASER ADDITIVE SOLUTIONS LTD"
},
"address": {
"locality": "Doncaster",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64340",
"name": "ARCHER TECHNICOAT LIMITED",
"identifier": {
"legalName": "ARCHER TECHNICOAT LIMITED"
},
"address": {
"locality": "High Wycombe",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64341",
"name": "OXFORD SIGMA",
"identifier": {
"legalName": "OXFORD SIGMA"
},
"address": {
"locality": "Didcot",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64342",
"name": "3-SCI LTD",
"identifier": {
"legalName": "3-SCI LTD"
},
"address": {
"locality": "Farnborough",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-64343",
"name": "FRAZER-NASH CONSULTANCY LIMITED",
"identifier": {
"legalName": "FRAZER-NASH CONSULTANCY LIMITED"
},
"address": {
"locality": "Leatherhead",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "large"
}
},
{
"id": "GB-FTS-64344",
"name": "DUALITY QUANTUM PHOTONICS LTD",
"identifier": {
"legalName": "DUALITY QUANTUM PHOTONICS LTD"
},
"address": {
"locality": "Bristol",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-36540",
"name": "Swansea University",
"identifier": {
"legalName": "Swansea University"
},
"address": {
"locality": "Swansea",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "large"
}
},
{
"id": "GB-FTS-64345",
"name": "JACOBS U.K. LIMITED",
"identifier": {
"legalName": "JACOBS U.K. LIMITED"
},
"address": {
"locality": "London",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "large"
}
},
{
"id": "GB-FTS-64346",
"name": "CASTINGS TECHNOLOGY INTERNATIONAL LIMITED",
"identifier": {
"legalName": "CASTINGS TECHNOLOGY INTERNATIONAL LIMITED"
},
"address": {
"locality": "Rotherham",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-1213",
"name": "UK Atomic Energy Authority",
"identifier": {
"legalName": "UK Atomic Energy Authority"
},
"address": {
"streetAddress": "Culham Science Centre",
"locality": "Abingdon",
"postalCode": "OX14 3DB",
"countryName": "United Kingdom"
},
"roles": [
"reviewBody",
"mediationBody",
"reviewContactPoint"
],
"details": {
"url": "https://www.gov.uk/government/organisations/uk-atomic-energy-authority"
}
}
],
"buyer": {
"id": "GB-FTS-1212",
"name": "United Kingdom Atomic Energy Authority"
},
"contracts": [
{
"id": "026987-2022-1",
"awardID": "026987-2022-1",
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"status": "active",
"value": {
"amount": 88150,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-2",
"awardID": "026987-2022-2",
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"status": "active",
"value": {
"amount": 195989,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-3",
"awardID": "026987-2022-3",
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"status": "active",
"value": {
"amount": 137654,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-4",
"awardID": "026987-2022-4",
"title": "Driving up fusion power plant performance with innovative heating and cooling systems.",
"status": "active",
"value": {
"amount": 137556,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-5",
"awardID": "026987-2022-5",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 184392,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-6",
"awardID": "026987-2022-6",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 116402,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-7",
"awardID": "026987-2022-7",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 195568,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-8",
"awardID": "026987-2022-8",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 105048,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-9",
"awardID": "026987-2022-9",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 199038,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-10",
"awardID": "026987-2022-10",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 199595,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-11",
"awardID": "026987-2022-11",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 176443,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-12",
"awardID": "026987-2022-12",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 194092,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-13",
"awardID": "026987-2022-13",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 154367,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-14",
"awardID": "026987-2022-14",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 70182,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-15",
"awardID": "026987-2022-15",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 190213,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-16",
"awardID": "026987-2022-16",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 168601,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-17",
"awardID": "026987-2022-17",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 197627,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-18",
"awardID": "026987-2022-18",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 195067,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
},
{
"id": "026987-2022-19",
"awardID": "026987-2022-19",
"title": "Improving fusion power plant availability with novel fusion materials, technology, and manufacture.",
"status": "active",
"value": {
"amount": 199999,
"currency": "GBP"
},
"dateSigned": "2022-08-26T00:00:00+01:00"
}
],
"bids": {
"statistics": [
{
"id": "1",
"measure": "bids",
"relatedLot": "1",
"value": 7
},
{
"id": "2",
"measure": "bids",
"relatedLot": "1",
"value": 7
},
{
"id": "3",
"measure": "bids",
"relatedLot": "1",
"value": 7
},
{
"id": "4",
"measure": "bids",
"relatedLot": "1",
"value": 7
},
{
"id": "5",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "6",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "7",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "8",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "9",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "10",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "11",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "12",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "13",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "14",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "15",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "16",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "17",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "18",
"measure": "bids",
"relatedLot": "2",
"value": 43
},
{
"id": "19",
"measure": "bids",
"relatedLot": "2",
"value": 43
}
]
},
"language": "en"
}