Notice Information
Notice Title
Coating and Drying Equipment for UKBIC Flexible Industrialisation Line (FIL)
Notice Description
This is a contract award notice Description of the original requirement below: The UKBIC Flexible Industrialisation Line is designed to allow staged scale-up of electrode manufacture from laboratory scale through to GWh scale on UKBIC's existing high-volume electrode lines. The project will be phased and in the first phase equipment will be purchased to allow scale-up of electrode processes from the Flexible Industrialisation Line to UKBIC's high-volume electrode lines. This will incorporate mixing process compatible with UKBIC's mainline process and coating and drying equipment which will take batches of slurry and convert them onto anode and cathode foils. Subsequent equipment will incorporate next generation electrode manufacturing processes, so solutions covering both scenarios are encouraged. This new electrode capability will be supplemented by flexible equipment to Calender and slit the electrode reels allowing them to be converted into cells using the main UKBIC cylindrical and pouch cell assembly lines, or other flexible cell manufacturing equipment that may be installed during a later phase. Coating and Drying Equipment is required to allow UKBIC to produce Anode and Cathode electrodes for use on its in-house cell assembly lines. The Coating & Drying equipment will be installed in a new internal Clean Room facility to UKBIC. UKBIC currently have Coating and Drying equipment in its Volume Industrialisation Line allowing for a segregated Coating of Anode and Cathode slurries, however the size of the equipment is designed for Electrode Material at high levels of maturity and/or at mass production scale. UKBIC is looking to install smaller equipment to support customers at a lower maturity level and allow for a wider range of chemistries. A flexible and modular solution is required to enable UKBIC to be less restricted in its Process Equipment offering and for a more Research and Development focused approach to Coating & Drying albeit on a scale larger than lab-based systems. Further to the general equipment requirement it necessary to offer a solvent/abatement system internal/external to the UKBIC facility to allow for safe solvent emission control and management from the drying process.
Lot Information
Lot 1
Contract award notice for Coating and Drying Equipment Coating and Drying Equipment is required to allow UKBIC to produce Anode and Cathode electrodes for use on its in-house cell assembly lines. The Coating & Drying equipment will be installed in a new internal Clean Room facility to UKBIC. UKBIC currently have Coating and Drying equipment in its Volume Industrialisation Line allowing for a segregated Coating of Anode and Cathode slurries, however the size of the equipment is designed for Electrode Material at high levels of maturity and/or at mass production scale. UKBIC is looking to install smaller equipment to support customers at a lower maturity level and allow for a wider range of chemistries. A flexible and modular solution is required to enable UKBIC to be less restricted in its Process Equipment offering and for a more Research and Development focused approach to Coating & Drying albeit on a scale larger than lab-based systems.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-03923d
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/013706-2023
- Current Stage
- Award
- All Stages
- Tender, Award
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- SME
Common Procurement Vocabulary (CPV)
- CPV Divisions
31 - Electrical machinery, apparatus, equipment and consumables; lighting
42 - Industrial machinery
-
- CPV Codes
31000000 - Electrical machinery, apparatus, equipment and consumables; lighting
42000000 - Industrial machinery
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £6,316,181 £1M-£10M
Notice Dates
- Publication Date
- 15 May 20232 years ago
- Submission Deadline
- 3 Feb 2023Expired
- Future Notice Date
- Not specified
- Award Date
- 1 May 20232 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Cancelled
- Awards Status
- Active
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UK BATTERY INDUSTRIALISATION CENTRE
- Contact Name
- Available with D3 Tenders Premium →
- Contact Email
- Available with D3 Tenders Premium →
- Contact Phone
- Available with D3 Tenders Premium →
Buyer Location
- Locality
- COVENTRY
- Postcode
- CV8 3AL
- Post Town
- Coventry
- Country
- England
-
- Major Region (ITL 1)
- TLG West Midlands (England)
- Basic Region (ITL 2)
- TLG1 Herefordshire, Worcestershire and Warwickshire
- Small Region (ITL 3)
- TLG13 Warwickshire CC
- Delivery Location
- Not specified
-
- Local Authority
- Warwick
- Electoral Ward
- Cubbington & Leek Wootton
- Westminster Constituency
- Kenilworth and Southam
Further Information
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-03923d-2023-05-15T09:27:43+01:00",
"date": "2023-05-15T09:27:43+01:00",
"ocid": "ocds-h6vhtk-03923d",
"initiationType": "tender",
"tender": {
"id": "DN648472",
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
},
"title": "Coating and Drying Equipment for UKBIC Flexible Industrialisation Line (FIL)",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "31000000",
"description": "Electrical machinery, apparatus, equipment and consumables; lighting"
},
"mainProcurementCategory": "goods",
"description": "This is a contract award notice Description of the original requirement below: The UKBIC Flexible Industrialisation Line is designed to allow staged scale-up of electrode manufacture from laboratory scale through to GWh scale on UKBIC's existing high-volume electrode lines. The project will be phased and in the first phase equipment will be purchased to allow scale-up of electrode processes from the Flexible Industrialisation Line to UKBIC's high-volume electrode lines. This will incorporate mixing process compatible with UKBIC's mainline process and coating and drying equipment which will take batches of slurry and convert them onto anode and cathode foils. Subsequent equipment will incorporate next generation electrode manufacturing processes, so solutions covering both scenarios are encouraged. This new electrode capability will be supplemented by flexible equipment to Calender and slit the electrode reels allowing them to be converted into cells using the main UKBIC cylindrical and pouch cell assembly lines, or other flexible cell manufacturing equipment that may be installed during a later phase. Coating and Drying Equipment is required to allow UKBIC to produce Anode and Cathode electrodes for use on its in-house cell assembly lines. The Coating & Drying equipment will be installed in a new internal Clean Room facility to UKBIC. UKBIC currently have Coating and Drying equipment in its Volume Industrialisation Line allowing for a segregated Coating of Anode and Cathode slurries, however the size of the equipment is designed for Electrode Material at high levels of maturity and/or at mass production scale. UKBIC is looking to install smaller equipment to support customers at a lower maturity level and allow for a wider range of chemistries. A flexible and modular solution is required to enable UKBIC to be less restricted in its Process Equipment offering and for a more Research and Development focused approach to Coating & Drying albeit on a scale larger than lab-based systems. Further to the general equipment requirement it necessary to offer a solvent/abatement system internal/external to the UKBIC facility to allow for safe solvent emission control and management from the drying process.",
"lots": [
{
"id": "1",
"description": "Contract award notice for Coating and Drying Equipment Coating and Drying Equipment is required to allow UKBIC to produce Anode and Cathode electrodes for use on its in-house cell assembly lines. The Coating & Drying equipment will be installed in a new internal Clean Room facility to UKBIC. UKBIC currently have Coating and Drying equipment in its Volume Industrialisation Line allowing for a segregated Coating of Anode and Cathode slurries, however the size of the equipment is designed for Electrode Material at high levels of maturity and/or at mass production scale. UKBIC is looking to install smaller equipment to support customers at a lower maturity level and allow for a wider range of chemistries. A flexible and modular solution is required to enable UKBIC to be less restricted in its Process Equipment offering and for a more Research and Development focused approach to Coating & Drying albeit on a scale larger than lab-based systems.",
"contractPeriod": {
"durationInDays": 720
},
"hasRenewal": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"hasOptions": false,
"status": "cancelled",
"awardCriteria": {
"criteria": [
{
"name": "Technical",
"type": "quality",
"description": "70"
},
{
"type": "price",
"description": "30"
}
]
}
}
],
"items": [
{
"id": "1",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "42000000",
"description": "Industrial machinery"
}
],
"deliveryAddresses": [
{
"region": "UK"
},
{
"region": "UK"
}
],
"relatedLot": "1"
}
],
"submissionMethod": [
"electronicSubmission"
],
"submissionMethodDetails": "https://procontract.due-north.com/Advert?advertId=b531a65a-7f7f-ed11-811c-005056b64545",
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure",
"coveredBy": [
"GPA"
],
"tenderPeriod": {
"endDate": "2023-02-03T12:00:00Z"
},
"submissionTerms": {
"languages": [
"en"
]
},
"awardPeriod": {
"startDate": "2023-02-03T12:00:00Z"
},
"bidOpening": {
"date": "2023-02-03T12:00:00Z"
},
"hasRecurrence": false
},
"parties": [
{
"id": "GB-FTS-63157",
"name": "UK Battery Industrialisation Centre",
"identifier": {
"legalName": "UK Battery Industrialisation Centre"
},
"address": {
"streetAddress": "Rowley Road, Baginton",
"locality": "Coventry",
"region": "UK",
"postalCode": "CV8 3AL",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Miss Procurement Tenders",
"telephone": "+44 2475267743",
"email": "ProcurementTenders@ukbic.co.uk",
"url": "https://procontract.due-north.com/Advert?advertId=b531a65a-7f7f-ed11-811c-005056b64545"
},
"roles": [
"buyer"
],
"details": {
"url": "https://www.ukbic.co.uk/",
"buyerProfile": "https://www.ukbic.co.uk/",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "BODY_PUBLIC",
"description": "Body governed by public law"
},
{
"scheme": "COFOG",
"description": "Research & Development"
}
]
}
},
{
"id": "GB-FTS-4500",
"name": "Royal Courts of Justice",
"identifier": {
"legalName": "Royal Courts of Justice"
},
"address": {
"locality": "London",
"postalCode": "WC2A 2LL",
"countryName": "United Kingdom"
},
"roles": [
"reviewBody"
]
},
{
"id": "GB-FTS-82672",
"name": "Werner Mathis AG",
"identifier": {
"legalName": "Werner Mathis AG"
},
"address": {
"locality": "Oberhasli",
"region": "CH",
"postalCode": "8156",
"countryName": "Switzerland"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-92",
"name": "Royal Courts of Justice",
"identifier": {
"legalName": "Royal Courts of Justice"
},
"address": {
"locality": "London",
"countryName": "United Kingdom"
},
"roles": [
"reviewBody"
]
}
],
"buyer": {
"id": "GB-FTS-63157",
"name": "UK Battery Industrialisation Centre"
},
"language": "en",
"awards": [
{
"id": "013706-2023-2022/S 000-035777-1",
"relatedLots": [
"1"
],
"status": "active",
"suppliers": [
{
"id": "GB-FTS-82672",
"name": "Werner Mathis AG"
}
]
}
],
"contracts": [
{
"id": "013706-2023-2022/S 000-035777-1",
"awardID": "013706-2023-2022/S 000-035777-1",
"status": "active",
"value": {
"amount": 6316181,
"currency": "CHF"
},
"dateSigned": "2023-05-02T00:00:00+01:00"
}
],
"bids": {
"statistics": [
{
"id": "1",
"measure": "bids",
"relatedLot": "1",
"value": 5
},
{
"id": "2",
"measure": "electronicBids",
"relatedLot": "1",
"value": 5
}
]
}
}