D3 Tenders | EBeam Lithographer

Notice Information

Get alerts for notices like these

Notice Title

EBeam Lithographer

Notice Description

The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following: a) Ultra-fine line lithography: 3 nm linewidth, using commercially available resists. This can be obtained by its single-nm digit beam diameter. b) Ultra-high position accuracy: This can be obtained by a laser interferometer with A (sub-1 nm) reading resolution, enabling a stitching accuracy of +-8 nm and overlay accuracy of +-8 nm. c) Uniform fine pattern writing over entire field: Uniform nm-scale lines can be drawn from edge to edge across a large field (>=2000mm) without the need for stitching. This guarantees better accuracy, eliminates the need for stage movement, and enhances writing speed and throughput. d) High throughput lithography: This will be enabled by a 125 MHz (or higher) high-speed deflection system coupled with a new electron beam column design. e) Wafer scale (& multi wafer) processing: Single cassette auto-loader supporting 8-inch wafers with a multi-cassette automatic sample loading system. Fast loading and pumping time. f) Flexibility in sample holders: Offer the ability to simultaneously handle a variety of wafer sizes by incorporating distinct holders for processing full wafers (2-8 inches) and/or small. g) Software: SEM Imaging Software, Alignment Software and CAD designing Software, which allows using and/or converting into industry standard GDSII and DXF file formats. It is believed the JEOL JBX-8100FS G3 Electron Beam Lithography System is the sole machine which complies with these requirements. Therefore, we deem competition is absent for technical reasons.

Lot Information

Lot 1

The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following: a) Ultra-fine line lithography: 3 nm linewidth, using commercially available resists. This can be obtained by its single-nm digit beam diameter. b) Ultra-high position accuracy: This can be obtained by a laser interferometer with A (sub-1 nm) reading resolution, enabling a stitching accuracy of +-8 nm and overlay accuracy of +-8 nm. c) Uniform fine pattern writing over entire field: Uniform nm-scale lines can be drawn from edge to edge across a large field (>=2000mm) without the need for stitching. This guarantees better accuracy, eliminates the need for stage movement, and enhances writing speed and throughput. d) High throughput lithography: This will be enabled by a 125 MHz (or higher) high-speed deflection system coupled with a new electron beam column design. e) Wafer scale (& multi wafer) processing: Single cassette auto-loader supporting 8-inch wafers with a multi-cassette automatic sample loading system. Fast loading and pumping time. f) Flexibility in sample holders: Offer the ability to simultaneously handle a variety of wafer sizes by incorporating distinct holders for processing full wafers (2-8 inches) and/or small. g) Software: SEM Imaging Software, Alignment Software and CAD designing Software, which allows using and/or converting into industry standard GDSII and DXF file formats. It is believed the JEOL JBX-8100FS G3 Electron Beam Lithography System is the sole machine which complies with these requirements. Therefore, we deem competition is absent for technical reasons.

Options: For transparency, extensions to service arrangements, and spare parts, may be purchased from the awarded supplier.

Procurement Information

The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following:

Notice Details

Get alerts for notices like these

Publication & Lifecycle

Open Contracting ID: ocds-h6vhtk-065fc1
Publication Source: Find A Tender Service
Latest Notice: https://www.find-tender.service.gov.uk/Notice/018498-2026
Current Stage: Award
All Stages: Award

Procurement Classification

Notice Type: Award Notice
Procurement Type: Standard
Procurement Category: Goods
Procurement Method: Limited
Procurement Method Details: Award procedure without prior publication of a call for competition
Tender Suitability: Not specified
Awardee Scale: Large

Common Procurement Vocabulary (CPV)

CPV Divisions: 38 - Laboratory, optical and precision equipments (excl. glasses)
CPV Codes: 38000000 - Laboratory, optical and precision equipments (excl. glasses)

Notice Value(s)

Tender Value: Not specified
Lots Value: Not specified
Awards Value: Not specified
Contracts Value: £2,398,869 £1M-£10M

Notice Dates

Publication Date: 2 Mar 20261 weeks ago
Submission Deadline: Not specified
Future Notice Date: Not specified
Award Date: 19 Feb 20263 weeks ago
Contract Period: Not specified - Not specified
Recurrence: Not specified

Notice Status

Tender Status: Complete
Lots Status: Cancelled
Awards Status: Active
Contracts Status: Active

Buyer & Supplier

Get alerts for notices like these

Contracting Authority (Buyer)

Main Buyer: UNIVERSITY OF EDINBURGH
Contact Name: Available with D3 Tenders Premium →
Contact Email: Available with D3 Tenders Premium →
Contact Phone: Available with D3 Tenders Premium →

Buyer Location

Locality: EDINBURGH
Postcode: EH1 1HT
Post Town: Edinburgh
Country: Scotland
Major Region (ITL 1): TLM Scotland
Basic Region (ITL 2): TLM1 East Central Scotland
Small Region (ITL 3): TLM13 City of Edinburgh
Delivery Location: TLM75 City of Edinburgh
Local Authority: City of Edinburgh
Electoral Ward: City Centre
Westminster Constituency: Edinburgh East and Musselburgh

Supplier Information

Number of Suppliers: 1
Supplier Name: JEOL (UK

Further Information

Notice URLs

Open Contracting Data Standard (OCDS)

View full OCDS Record for this contracting process

Download

The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.

{
    "tag": [
        "compiled"
    ],
    "id": "ocds-h6vhtk-065fc1-2026-03-02T14:18:04Z",
    "date": "2026-03-02T14:18:04Z",
    "ocid": "ocds-h6vhtk-065fc1",
    "description": "(SC Ref:825231)",
    "initiationType": "tender",
    "tender": {
        "id": "NCA31130",
        "legalBasis": {
            "id": "32014L0024",
            "scheme": "CELEX"
        },
        "title": "EBeam Lithographer",
        "status": "complete",
        "classification": {
            "scheme": "CPV",
            "id": "38000000",
            "description": "Laboratory, optical and precision equipments (excl. glasses)"
        },
        "mainProcurementCategory": "goods",
        "description": "The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following: a) Ultra-fine line lithography: 3 nm linewidth, using commercially available resists. This can be obtained by its single-nm digit beam diameter. b) Ultra-high position accuracy: This can be obtained by a laser interferometer with A (sub-1 nm) reading resolution, enabling a stitching accuracy of +-8 nm and overlay accuracy of +-8 nm. c) Uniform fine pattern writing over entire field: Uniform nm-scale lines can be drawn from edge to edge across a large field (>=2000mm) without the need for stitching. This guarantees better accuracy, eliminates the need for stage movement, and enhances writing speed and throughput. d) High throughput lithography: This will be enabled by a 125 MHz (or higher) high-speed deflection system coupled with a new electron beam column design. e) Wafer scale (& multi wafer) processing: Single cassette auto-loader supporting 8-inch wafers with a multi-cassette automatic sample loading system. Fast loading and pumping time. f) Flexibility in sample holders: Offer the ability to simultaneously handle a variety of wafer sizes by incorporating distinct holders for processing full wafers (2-8 inches) and/or small. g) Software: SEM Imaging Software, Alignment Software and CAD designing Software, which allows using and/or converting into industry standard GDSII and DXF file formats. It is believed the JEOL JBX-8100FS G3 Electron Beam Lithography System is the sole machine which complies with these requirements. Therefore, we deem competition is absent for technical reasons.",
        "lots": [
            {
                "id": "1",
                "description": "The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following: a) Ultra-fine line lithography: 3 nm linewidth, using commercially available resists. This can be obtained by its single-nm digit beam diameter. b) Ultra-high position accuracy: This can be obtained by a laser interferometer with A (sub-1 nm) reading resolution, enabling a stitching accuracy of +-8 nm and overlay accuracy of +-8 nm. c) Uniform fine pattern writing over entire field: Uniform nm-scale lines can be drawn from edge to edge across a large field (>=2000mm) without the need for stitching. This guarantees better accuracy, eliminates the need for stage movement, and enhances writing speed and throughput. d) High throughput lithography: This will be enabled by a 125 MHz (or higher) high-speed deflection system coupled with a new electron beam column design. e) Wafer scale (& multi wafer) processing: Single cassette auto-loader supporting 8-inch wafers with a multi-cassette automatic sample loading system. Fast loading and pumping time. f) Flexibility in sample holders: Offer the ability to simultaneously handle a variety of wafer sizes by incorporating distinct holders for processing full wafers (2-8 inches) and/or small. g) Software: SEM Imaging Software, Alignment Software and CAD designing Software, which allows using and/or converting into industry standard GDSII and DXF file formats. It is believed the JEOL JBX-8100FS G3 Electron Beam Lithography System is the sole machine which complies with these requirements. Therefore, we deem competition is absent for technical reasons.",
                "awardCriteria": {
                    "criteria": [
                        {
                            "name": "Suitability to fulfil requirement",
                            "type": "quality",
                            "description": "50"
                        },
                        {
                            "name": "Cost alignment with appetite",
                            "type": "cost",
                            "description": "50"
                        }
                    ]
                },
                "hasOptions": true,
                "options": {
                    "description": "For transparency, extensions to service arrangements, and spare parts, may be purchased from the awarded supplier."
                },
                "status": "cancelled"
            }
        ],
        "items": [
            {
                "id": "1",
                "deliveryAddresses": [
                    {
                        "region": "UKM75"
                    }
                ],
                "deliveryLocation": {
                    "description": "Edinburgh, Scotland"
                },
                "relatedLot": "1"
            }
        ],
        "procurementMethod": "limited",
        "procurementMethodDetails": "Award procedure without prior publication of a call for competition",
        "coveredBy": [
            "GPA"
        ],
        "procurementMethodRationaleClassifications": [
            {
                "id": "D_TECHNICAL",
                "scheme": "TED_PT_AWARD_CONTRACT_WITHOUT_CALL",
                "description": "The works, supplies or services can be provided only by a particular economic operator due to absence of competition for technical reasons"
            }
        ],
        "procurementMethodRationale": "The University has a requirement for an Electron Beam lithography system which has an acceleration voltage of at least 200 kV. It must be capable of the following:"
    },
    "awards": [
        {
            "id": "018498-2026-1",
            "relatedLots": [
                "1"
            ],
            "status": "active",
            "suppliers": [
                {
                    "id": "GB-FTS-42512",
                    "name": "JEOL (UK) Ltd"
                }
            ]
        }
    ],
    "parties": [
        {
            "id": "GB-FTS-2023",
            "name": "University Of Edinburgh",
            "identifier": {
                "legalName": "University Of Edinburgh"
            },
            "address": {
                "streetAddress": "Charles Stewart House, 9-16 Chambers Street",
                "locality": "Edinburgh",
                "region": "UKM75",
                "postalCode": "EH1 1HT",
                "countryName": "United Kingdom"
            },
            "contactPoint": {
                "telephone": "+44 1316502759",
                "email": "jpike2@ed.ac.uk"
            },
            "roles": [
                "buyer",
                "centralPurchasingBody"
            ],
            "details": {
                "url": "http://www.ed.ac.uk",
                "buyerProfile": "https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00107",
                "classifications": [
                    {
                        "id": "BODY_PUBLIC",
                        "scheme": "TED_CA_TYPE",
                        "description": "Body governed by public law"
                    },
                    {
                        "id": "09",
                        "scheme": "COFOG",
                        "description": "Education"
                    }
                ]
            }
        },
        {
            "id": "GB-FTS-42512",
            "name": "JEOL (UK) Ltd",
            "identifier": {
                "legalName": "JEOL (UK) Ltd"
            },
            "address": {
                "streetAddress": "JEOL House, Silver Court, Watchmead",
                "locality": "Welwyn Garden City",
                "region": "UK",
                "postalCode": "AL7 1LT",
                "countryName": "United Kingdom"
            },
            "roles": [
                "supplier"
            ],
            "details": {
                "scale": "large"
            }
        },
        {
            "id": "GB-FTS-1033",
            "name": "Edinburgh Sheriff Court",
            "identifier": {
                "legalName": "Edinburgh Sheriff Court"
            },
            "address": {
                "locality": "Edinburgh",
                "countryName": "United Kingdom"
            },
            "roles": [
                "reviewBody"
            ]
        }
    ],
    "buyer": {
        "id": "GB-FTS-2023",
        "name": "University Of Edinburgh"
    },
    "contracts": [
        {
            "id": "018498-2026-1",
            "awardID": "018498-2026-1",
            "status": "active",
            "value": {
                "amount": 2398869,
                "currency": "GBP"
            },
            "dateSigned": "2026-02-19T00:00:00Z"
        }
    ],
    "bids": {
        "statistics": [
            {
                "id": "1",
                "measure": "bids",
                "relatedLot": "1",
                "value": 1
            },
            {
                "id": "2",
                "measure": "smeBids",
                "relatedLot": "1",
                "value": 0
            },
            {
                "id": "3",
                "measure": "foreignBidsFromEU",
                "relatedLot": "1",
                "value": 0
            },
            {
                "id": "4",
                "measure": "foreignBidsFromNonEU",
                "relatedLot": "1",
                "value": 1
            },
            {
                "id": "5",
                "measure": "electronicBids",
                "relatedLot": "1",
                "value": 1
            }
        ]
    },
    "links": [
        {
            "rel": "canonical",
            "href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000825231"
        }
    ],
    "language": "en"
}