Notice Information
Notice Title
Provision of an Operations Management solution and In-Cab Technology for Waste & Recycling
Notice Description
The Council is looking to invest in a quality and cost effective end-to-end digital solution from a single supplier to modernise Waste and Recycling services across the Authority. This solution will comprise of: - An end-to-end digital solution which combines in-cab units, back office system and database capability for a variety of tasks including: - An "out of the box" system with minimal configuration - Automation of administrative tasks (completion/closure of CRMs for tasks such as missed collections, bulky household collections and delivery of containers) - Provide additional/continual service efficiencies through automated task allocation based on Council priorities - Viewable accurate and live data of round completion/work flows for back office staff/managers with manual work (re)distribution capabilities dependant on service need - Configurable database which contains property/user information, including container type and size, contamination history, application for containers history, enforcement history (including pictures/evidence), additional requirements (assisted collections) and subscription information for garden waste/AHP etc. - Manual input from Operatives using the in cab system to input completion of work streams (collection rounds etc.) and identify where manual intervention is needed (contaminated containers, replacement containers, safety/welfare issues and orphan bins/fly tipping. - A mobile hardware solution (rugged touchscreen device) which can be mounted into Waste and Recycling Fleet, allowing for a full user interface. There will also be a requirement for the supplier to fit the devices and then retrofit a number of these units to our new waste fleet in 2023. - Real-time connectivity between back office system and in-cab units, allowing for tasks to be "pushed" from back office to specific crews for resolution and updates "pushed" back from the in-cab into the back-office. This will include an offline mode for when the device is in an area of poor signal. - Sufficient users/licences must be provided to enable the council to deploy the solution across the Waste Department. This will be approximately 45 in-cab units and 20 back office users. However, with the upcoming service change, there may be a requirement for the provider to provide additional licences in the future. - Automated integration with routing software, to allow for real-time changes in routes (including multiple changes) to be applied across the solution, for route optimisation but also to allow for full flexibility when building and implementing new routes as part of the service change and continual efficiencies. - Two-way information sharing between the in-cab system and route optimisation software, allowing actual data to inform route efficiencies. - Full integration with the Council's CRM system (currently Civica C360), automated data transfer and information sharing and automation of closing CRMs e.g. a missed container requested or container delivery. - Importing of existing data held by Council systems into the solution, including database information, BS7666 Gazetteer, GIS mapping data, CSV files etc. The aim is to have a fully configured and functional system by March 2022.
Lot Information
Lot 1
The Council is looking to invest in a quality and cost effective end-to-end digital solution from a single supplier to modernise Waste and Recycling services across the Authority. This solution will comprise of: - An end-to-end digital solution which combines in-cab units, back office system and database capability for a variety of tasks including: - An "out of the box" system with minimal configuration - Automation of administrative tasks (completion/closure of CRMs for tasks such as missed collections, bulky household collections and delivery of containers) - Provide additional/continual service efficiencies through automated task allocation based on Council priorities - Viewable accurate and live data of round completion/work flows for back office staff/managers with manual work (re)distribution capabilities dependant on service need - Configurable database which contains property/user information, including container type and size, contamination history, application for containers history, enforcement history (including pictures/evidence), additional requirements (assisted collections) and subscription information for garden waste/AHP etc. - Manual input from Operatives using the in cab system to input completion of work streams (collection rounds etc.) and identify where manual intervention is needed (contaminated containers, replacement containers, safety/welfare issues and orphan bins/fly tipping. - A mobile hardware solution (rugged touchscreen device) which can be mounted into Waste and Recycling Fleet, allowing for a full user interface. There will also be a requirement for the supplier to fit the devices and then retrofit a number of these units to our new waste fleet in 2023. - Real-time connectivity between back office system and in-cab units, allowing for tasks to be "pushed" from back office to specific crews for resolution and updates "pushed" back from the in-cab into the back-office. This will include an offline mode for when the device is in an area of poor signal. - Sufficient users/licences must be provided to enable the council to deploy the solution across the Waste Department. This will be approximately 45 in-cab units and 20 back office users. However, with the upcoming service change, there may be a requirement for the provider to provide additional licences in the future. - Automated integration with routing software, to allow for real-time changes in routes (including multiple changes) to be applied across the solution, for route optimisation but also to allow for full flexibility when building and implementing new routes as part of the service change and continual efficiencies. - Two-way information sharing between the in-cab system and route optimisation software, allowing actual data to inform route efficiencies. - Full integration with the Council's CRM system (currently Civica C360), automated data transfer and information sharing and automation of closing CRMs e.g. a missed container requested or container delivery. - Importing of existing data held by Council systems into the solution, including database information, BS7666 Gazetteer, GIS mapping data, CSV files etc. The aim is to have a fully configured and functional system by March 2022.
Options: During the duration of the contract there may be requirements to purchase the same software to implement in other areas of the authority. In addition, Denbighshire's Route Optimisation Software is due for renewal during the duration of this contract and there may be a requirement to purchase this from the successful supplier. These two purchases are not guaranteed.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-kuma6s-111851
- Publication Source
- Sell2Wales
- Latest Notice
- https://www.sell2wales.gov.wales/search/search_switch.aspx?ID=111851
- Current Stage
- Award
- All Stages
- Award
Procurement Classification
- Notice Type
- OJEU - F3 - Contract Award Notice
- Procurement Type
- Standard
- Procurement Category
- Services
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
72 - IT services: consulting, software development, Internet and support
-
- CPV Codes
72000000 - IT services: consulting, software development, Internet and support
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 3 May 20224 years ago
- Submission Deadline
- Not specified
- Future Notice Date
- Not specified
- Award Date
- 3 May 20224 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Unsuccessful
- Lots Status
- Unsuccessful
- Awards Status
- Unsuccessful
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- Denbighshire County Council
- Contact Name
- Available with D3 Tenders Premium →
- Contact Email
- Available with D3 Tenders Premium →
- Contact Phone
- Available with D3 Tenders Premium →
Buyer Location
- Locality
- RUTHIN
- Postcode
- LL15 1YN
- Postcode Area
- Llandudno
- Country
- Wales
-
- Major Region (ITL 1)
- TLL Wales
- Basic Region (ITL 2)
- TLL3 North Wales
- Small Region (ITL 3)
- TLL33 Conwy and Denbighshire
- Delivery Location
- TLL13 Conwy and Denbighshire
-
- Local Authority
- Denbighshire
- Electoral Ward
- Ruthin
- Westminster Constituency
- Clwyd East
Further Information
Notice Documents
-
https://www.sell2wales.gov.wales/search/show/search_view.aspx?ID=MAY396477
Provision of an Operations Management solution and In-Cab Technology for Waste & Recycling - The Council is looking to invest in a quality and cost effective end-to-end digital solution from a single supplier to modernise Waste and Recycling services across the Authority. This solution will comprise of: - An end-to-end digital solution which combines in-cab units, back office system and database capability for a variety of tasks including: - An "out of the box" system with minimal configuration - Automation of administrative tasks (completion/closure of CRMs for tasks such as missed collections, bulky household collections and delivery of containers) - Provide additional/continual service efficiencies through automated task allocation based on Council priorities - Viewable accurate and live data of round completion/work flows for back office staff/managers with manual work (re)distribution capabilities dependant on service need - Configurable database which contains property/user information, including container type and size, contamination history, application for containers history, enforcement history (including pictures/evidence), additional requirements (assisted collections) and subscription information for garden waste/AHP etc. - Manual input from Operatives using the in cab system to input completion of work streams (collection rounds etc.) and identify where manual intervention is needed (contaminated containers, replacement containers, safety/welfare issues and orphan bins/fly tipping. - A mobile hardware solution (rugged touchscreen device) which can be mounted into Waste and Recycling Fleet, allowing for a full user interface. There will also be a requirement for the supplier to fit the devices and then retrofit a number of these units to our new waste fleet in 2023. - Real-time connectivity between back office system and in-cab units, allowing for tasks to be "pushed" from back office to specific crews for resolution and updates "pushed" back from the in-cab into the back-office. This will include an offline mode for when the device is in an area of poor signal. - Sufficient users/licences must be provided to enable the council to deploy the solution across the Waste Department. This will be approximately 45 in-cab units and 20 back office users. However, with the upcoming service change, there may be a requirement for the provider to provide additional licences in the future. - Automated integration with routing software, to allow for real-time changes in routes (including multiple changes) to be applied across the solution, for route optimisation but also to allow for full flexibility when building and implementing new routes as part of the service change and continual efficiencies. - Two-way information sharing between the in-cab system and route optimisation software, allowing actual data to inform route efficiencies. - Full integration with the Council's CRM system (currently Civica C360), automated data transfer and information sharing and automation of closing CRMs e.g. a missed container requested or container delivery. - Importing of existing data held by Council systems into the solution, including database information, BS7666 Gazetteer, GIS mapping data, CSV files etc. The aim is to have a fully configured and functional system by March 2022.
Open Contracting Data Standard (OCDS)
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.