Notice Information
Notice Title
Eden Campus - Dry Room Facility for ACMF Project
Notice Description
We require a dry room, capable of housing lithium- and sodium-ion battery production. The dry room will sit within a modular building. Required components: - Dry space with dimensions of at least 8 m x 12 m and 2.65 m height - Airlock with floor space of least 2 m x 2 m, this can be within the dry space footprint or adjoining and include a 'traffic-light' system to control entry to the dry space - A maximum dew point of -40degC, preferably -50oC - External equipment access door with dimensions of 2 m x 2 m - Number of People = 3 - Lighting level 600lux @ 1m
Lot Information
Lot 1
Dry Room Facility We require a dry room, capable of housing lithium- and sodium-ion battery production. The dry room will sit within a modular building. Required components: - Dry space with dimensions of at least 8 m x 12 m and 2.65 m height - Airlock with floor space of least 2 m x 2 m, this can be within the dry space footprint or adjoining and include a 'traffic-light' system to control entry to the dry space - A maximum dew point of -40degC, preferably -50oC - External equipment access door with dimensions of 2 m x 2 m - Number of People = 3 - Lighting level 600lux @ 1m Due to the moisture sensitivity of advanced battery chemistries, a high-quality dry room is vital. The dry room will enable the development of new battery chemistries and production methods. It is highly desirable that the dry room should reliably sustain an ultra-low dew point with an occupancy of up to three. The dry room should feature airlock access for personnel and portable equipment, providing a small area for staff to change into PPE. A cleanliness level in line with ISO7 would be desirable. We envisage the enclosure of the dry room inside a modular building. The dry room may also require to be relocated at a future point; therefore, this capability should be referenced in the tender submission. Portakabin recently installed such a building within the University of St Andrews. Prior experience to installation within modular buildings, including a willingness to work together with building contractors, would be advantageous. The dry room should be equipped to support an array of battery manufacturing equipment. We will require an external access door to install or remove equipment. The dry room should include services such as exhaust handling, suitable power outlets (up to 10 three phase outlets and regular 220 V power sockets), and compressed air and argon lines. You should consider these in your design and estimated cost, and we will confirm exact numbers and types during final specification.. All tenders for the University of St Andrews are administered through our eTendering System (InTend).To Express an Interest please go tou our tender website at https://intendhost.co.uk/universityofstandrews Please note that 'Notes of Interest' placed via PCS (Public Contracts Scotland) are not automatically accepted
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-r6ebe6-0000625009
- Publication Source
- Public Contracts Scotland
- Latest Notice
- https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JAN405233
- Current Stage
- Award
- All Stages
- Tender, Award
Procurement Classification
- Notice Type
- OJEU - F3 - Contract Award Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- SME
Common Procurement Vocabulary (CPV)
- CPV Divisions
44 - Construction structures and materials; auxiliary products to construction (except electric apparatus)
-
- CPV Codes
44211100 - Modular and portable buildings
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £576,345 £500K-£1M
Notice Dates
- Publication Date
- 28 Jan 20215 years ago
- Submission Deadline
- 10 Aug 2020Expired
- Future Notice Date
- Not specified
- Award Date
- 14 Jan 20215 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Complete
- Awards Status
- Not Specified
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNIVERSITY OF ST ANDREWS
- Contact Name
- Not specified
- Contact Email
- procurement@st-andrews.ac.uk
- Contact Phone
- +44 1334462523
Buyer Location
- Locality
- ST ANDREWS
- Postcode
- KY16 9LB
- Post Town
- Kirkcaldy
- Country
- Scotland
-
- Major Region (ITL 1)
- TLM Scotland
- Basic Region (ITL 2)
- TLM0 Eastern Scotland
- Small Region (ITL 3)
- TLM01 Clackmannanshire and Fife
- Delivery Location
- TLM72 Clackmannanshire and Fife
-
- Local Authority
- Fife
- Electoral Ward
- St Andrews
- Westminster Constituency
- North East Fife
Further Information
Notice Documents
-
https://www.publiccontractsscotland.gov.uk/NoticeDownload/DownloadDocument.aspx?id=JUL390094&idx=1
13th July 2020 - Portal Instructions -
https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JUL390094
Eden Campus - Dry Room Facility for ACMF Project - We require a dry room, capable of housing lithium- and sodium-ion battery production. The dry room will sit within a modular building. Required components: - Dry space with dimensions of at least 8 m x 12 m and 2.65 m height - Airlock with floor space of least 2 m x 2 m, this can be within the dry space footprint or adjoining and include a 'traffic-light' system to control entry to the dry space - A maximum dew point of -40degC, preferably -50oC - External equipment access door with dimensions of 2 m x 2 m - Number of People = 3 - Lighting level 600lux @ 1m -
https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JAN405233
Eden Campus - Dry Room Facility for ACMF Project - We require a dry room, capable of housing lithium- and sodium-ion battery production. The dry room will sit within a modular building. Required components: - Dry space with dimensions of at least 8 m x 12 m and 2.65 m height - Airlock with floor space of least 2 m x 2 m, this can be within the dry space footprint or adjoining and include a 'traffic-light' system to control entry to the dry space - A maximum dew point of -40degC, preferably -50oC - External equipment access door with dimensions of 2 m x 2 m - Number of People = 3 - Lighting level 600lux @ 1m
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-r6ebe6-0000625009-2021-01-28T00:00:00Z",
"date": "2021-01-28T00:00:00Z",
"ocid": "ocds-r6ebe6-0000625009",
"initiationType": "tender",
"parties": [
{
"id": "org-55",
"name": "University of St Andrews",
"identifier": {
"legalName": "University of St Andrews"
},
"address": {
"streetAddress": "The Old Burgh School, Abbey Walk",
"locality": "St Andrews",
"region": "UKM72",
"postalCode": "KY16 9LB"
},
"contactPoint": {
"email": "procurement@st-andrews.ac.uk",
"telephone": "+44 1334462523",
"url": "https://in-tendhost.co.uk/universityofstandrews"
},
"roles": [
"buyer"
],
"details": {
"classifications": [
{
"id": "Body governed by public law",
"scheme": "TED_CA_TYPE"
},
{
"id": "09",
"description": "Education",
"scheme": "COFOG"
}
],
"url": "http://www.st-andrews.ac.uk/staff/money/procurement/"
}
},
{
"id": "org-31",
"name": "Dundee Sheriff Court",
"identifier": {
"legalName": "Dundee Sheriff Court"
},
"address": {
"streetAddress": "6 West Bell Street",
"locality": "Dundee",
"postalCode": "DD1 9AD"
},
"contactPoint": {
"email": "dundee@scotcourts.gov.uk",
"telephone": "+44 1382229961",
"url": "http://www.scotcourts.gov.uk"
},
"roles": [
"reviewBody"
]
},
{
"id": "org-1",
"name": "University of St Andrews",
"identifier": {
"legalName": "University of St Andrews"
},
"address": {
"streetAddress": "The Old Burgh School, Abbey Walk",
"locality": "St Andrews",
"region": "UKM72",
"postalCode": "KY16 9LB"
},
"contactPoint": {
"email": "procurement@st-andrews.ac.uk",
"telephone": "+44 1334462523",
"url": "http://"
},
"roles": [
"buyer"
],
"details": {
"classifications": [
{
"id": "Body governed by public law",
"scheme": "TED_CA_TYPE"
},
{
"id": "09",
"description": "Education",
"scheme": "COFOG"
}
],
"url": "http://www.st-andrews.ac.uk/staff/money/procurement/"
}
},
{
"id": "org-2",
"name": "Munters Ltd",
"identifier": {
"legalName": "Munters Ltd"
},
"address": {
"streetAddress": "knowledge Centre, great north road,, wyboston Lakes",
"locality": "bedfordshire",
"region": "UK",
"postalCode": "mk443by"
},
"contactPoint": {
"telephone": "+44 07900277448"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme",
"url": "http://"
}
},
{
"id": "org-3",
"name": "Dundee Sheriff Court",
"identifier": {
"legalName": "Dundee Sheriff Court"
},
"address": {
"streetAddress": "6 West Bell Street",
"locality": "Dundee",
"postalCode": "DD1 9AD"
},
"contactPoint": {
"telephone": "+44 1382229961",
"url": "http://"
},
"roles": [
"reviewBody"
]
}
],
"buyer": {
"name": "University of St Andrews",
"id": "org-1"
},
"tender": {
"id": "CHM/080720B/JI/SL",
"title": "Eden Campus - Dry Room Facility for ACMF Project",
"description": "We require a dry room, capable of housing lithium- and sodium-ion battery production. The dry room will sit within a modular building. Required components: - Dry space with dimensions of at least 8 m x 12 m and 2.65 m height - Airlock with floor space of least 2 m x 2 m, this can be within the dry space footprint or adjoining and include a 'traffic-light' system to control entry to the dry space - A maximum dew point of -40degC, preferably -50oC - External equipment access door with dimensions of 2 m x 2 m - Number of People = 3 - Lighting level 600lux @ 1m",
"status": "complete",
"items": [
{
"id": "1",
"deliveryLocation": {
"description": "UK - St Andrews"
},
"deliveryAddresses": [
{
"region": "UKM72"
},
{
"region": "UKM72"
}
],
"relatedLot": "1"
}
],
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure",
"mainProcurementCategory": "goods",
"submissionMethod": [
"electronicSubmission"
],
"submissionMethodDetails": "https://in-tendhost.co.uk/universityofstandrews",
"tenderPeriod": {
"endDate": "2020-08-10T12:00:00Z"
},
"awardPeriod": {
"startDate": "2020-08-10T12:00:00Z"
},
"documents": [
{
"id": "JUL390094",
"documentType": "contractNotice",
"title": "Eden Campus - Dry Room Facility for ACMF Project",
"description": "We require a dry room, capable of housing lithium- and sodium-ion battery production. The dry room will sit within a modular building. Required components: - Dry space with dimensions of at least 8 m x 12 m and 2.65 m height - Airlock with floor space of least 2 m x 2 m, this can be within the dry space footprint or adjoining and include a 'traffic-light' system to control entry to the dry space - A maximum dew point of -40degC, preferably -50oC - External equipment access door with dimensions of 2 m x 2 m - Number of People = 3 - Lighting level 600lux @ 1m",
"url": "https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JUL390094",
"format": "text/html"
},
{
"id": "economic",
"documentType": "economicSelectionCriteria"
},
{
"id": "technical",
"documentType": "technicalSelectionCriteria"
},
{
"id": "JUL390094-1",
"title": "Portal Instructions",
"url": "https://www.publiccontractsscotland.gov.uk/NoticeDownload/DownloadDocument.aspx?id=JUL390094&idx=1",
"datePublished": "2020-07-13T08:49:48Z",
"dateModified": "2020-07-13T08:49:48Z",
"format": "application/pdf"
},
{
"id": "JAN405233",
"documentType": "awardNotice",
"title": "Eden Campus - Dry Room Facility for ACMF Project",
"description": "We require a dry room, capable of housing lithium- and sodium-ion battery production. The dry room will sit within a modular building. Required components: - Dry space with dimensions of at least 8 m x 12 m and 2.65 m height - Airlock with floor space of least 2 m x 2 m, this can be within the dry space footprint or adjoining and include a 'traffic-light' system to control entry to the dry space - A maximum dew point of -40degC, preferably -50oC - External equipment access door with dimensions of 2 m x 2 m - Number of People = 3 - Lighting level 600lux @ 1m",
"url": "https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JAN405233",
"format": "text/html"
}
],
"lots": [
{
"id": "1",
"description": "Dry Room Facility We require a dry room, capable of housing lithium- and sodium-ion battery production. The dry room will sit within a modular building. Required components: - Dry space with dimensions of at least 8 m x 12 m and 2.65 m height - Airlock with floor space of least 2 m x 2 m, this can be within the dry space footprint or adjoining and include a 'traffic-light' system to control entry to the dry space - A maximum dew point of -40degC, preferably -50oC - External equipment access door with dimensions of 2 m x 2 m - Number of People = 3 - Lighting level 600lux @ 1m Due to the moisture sensitivity of advanced battery chemistries, a high-quality dry room is vital. The dry room will enable the development of new battery chemistries and production methods. It is highly desirable that the dry room should reliably sustain an ultra-low dew point with an occupancy of up to three. The dry room should feature airlock access for personnel and portable equipment, providing a small area for staff to change into PPE. A cleanliness level in line with ISO7 would be desirable. We envisage the enclosure of the dry room inside a modular building. The dry room may also require to be relocated at a future point; therefore, this capability should be referenced in the tender submission. Portakabin recently installed such a building within the University of St Andrews. Prior experience to installation within modular buildings, including a willingness to work together with building contractors, would be advantageous. The dry room should be equipped to support an array of battery manufacturing equipment. We will require an external access door to install or remove equipment. The dry room should include services such as exhaust handling, suitable power outlets (up to 10 three phase outlets and regular 220 V power sockets), and compressed air and argon lines. You should consider these in your design and estimated cost, and we will confirm exact numbers and types during final specification.. All tenders for the University of St Andrews are administered through our eTendering System (InTend).To Express an Interest please go tou our tender website at https://intendhost.co.uk/universityofstandrews Please note that 'Notes of Interest' placed via PCS (Public Contracts Scotland) are not automatically accepted",
"status": "complete",
"hasOptions": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"contractPeriod": {
"durationInDays": 180
},
"hasRenewal": false,
"awardCriteria": {
"criteria": [
{
"type": "quality",
"name": "Quality",
"description": "60"
},
{
"type": "price",
"description": "40"
}
]
}
}
],
"participationFees": [
{
"id": "1",
"type": [
"document"
]
}
],
"bidOpening": {
"date": "2020-08-10T12:00:00Z",
"address": {
"streetAddress": "Procurement - University of St Andrews"
},
"description": "Authorised Procurement Staff."
},
"communication": {
"atypicalToolUrl": "https://in-tendhost.co.uk/universityofstandrews"
},
"contractTerms": {
"hasElectronicPayment": true,
"hasElectronicOrdering": true,
"electronicInvoicingPolicy": "allowed"
},
"otherRequirements": {
"requiresStaffNamesAndQualifications": true
},
"submissionTerms": {
"languages": [
"en"
],
"bidValidityPeriod": {
"durationInDays": 90
}
},
"classification": {
"id": "44211100",
"scheme": "CPV"
},
"reviewDetails": "Anyone bringing court proceedings against the University of St Andrews must inform the University of St Andrews in advance of the alleged breach and its intention to bring proceedings. Any such action must be brought within 15 days of the date on which a decision is sent to them or published to challenge that decision. Proceedings seeking an ineffectiveness order must be brought within 30 days of the publication of the contract award notice in the OJEU, or 30 days from the date of a decision letter to all tenderers concerned, and any candidates concerned, containing a summary of the reason for the recipient being unsuccessful, otherwise 6 months from the date of entering into the contract or concluding the framework agreement. Where a contract has not been entered into the Court may, by interim order, suspend the procurement procedure. The court may also set aside a decision or actions taken by the University or order it to amend and document; and/or award damages. However, by express requirement the court may decide not to grant an interim order when the negative consequences of such an order are likely to outweigh the benefits, having regard to a number of considerations. If the contract has been entered into the Court may, depending on the nature of the breach: make an ineffectiveness order; impose a financial penalty; shorten the duration of the contract; make any other order considered appropriate to address the consequences of ineffectiveness or shortening the duration or the contract; award damages.",
"hasRecurrence": false,
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
}
},
"language": "EN",
"description": "All tenders for the University of St Andrews are administered through our eTendering System (InTend).To Express an Interest please go tou our tender website at https://intendhost.co.uk/universityofstandrews Please note that 'Notes of Interest' placed via PCS (Public Contracts Scotland) are not automatically accepted (SC Ref:642446)",
"links": [
{
"rel": "canonical",
"href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000625009"
},
{
"rel": "canonical",
"href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000625009"
}
],
"noticetype": "OJEU - F3 - Contract Award Notice",
"awards": [
{
"id": "EXE/080720B/JI/SL",
"suppliers": [
{
"id": "org-2",
"name": "Munters Ltd"
}
],
"relatedLots": [
"1"
]
}
],
"contracts": [
{
"id": "EXE/080720B/JI/SL",
"awardID": "EXE/080720B/JI/SL",
"status": "active",
"value": {
"amount": 576345,
"currency": "GBP"
},
"dateSigned": "2021-01-14T00:00:00Z"
}
],
"relatedProcesses": [
{
"id": "1",
"relationship": [
"planning"
],
"scheme": "EU-OJ",
"identifier": "2020/S 133-328059"
}
],
"bids": {
"statistics": [
{
"id": "1",
"measure": "bids",
"value": 4,
"relatedLot": "1"
},
{
"id": "2",
"measure": "smeBids",
"value": 3,
"relatedLot": "1"
},
{
"id": "3",
"measure": "foreignBidsFromEU",
"value": 0,
"relatedLot": "1"
},
{
"id": "4",
"measure": "foreignBidsFromNonEU",
"value": 1,
"relatedLot": "1"
},
{
"id": "5",
"measure": "electronicBids",
"value": 4,
"relatedLot": "1"
}
]
}
}