Notice Information
Notice Title
Thames Tideway Tunnel - C405 Main Works West - Architectural Metalwork
Notice Description
The Thames Tideway Tunnel project (the Project) will control CSO discharges by intercepting and diverting combined sewage flows into a new storage and transfer tunnel. The main tunnel will run from Acton Storm Tanks in west London to Abbey Mills Pumping Station in the east, where it will connect to the Lee Tunnel, which will transfer the combined sewage to Beckton Sewage Treatment Works for treatment. The Project extends from Acton Storm Tanks in west London, to Abbey Mills Pumping Station in east London. The Project includes associated works at Beckton STW, Shad Thames Pumping Station and Bekesbourne Street. The geographic layout of the Project and local authorities through which it passes is shown in Figure 1. The Project comprises: a. tunnels: i. a main tunnel which will capture and store combined sewage from CSOs along its route and transfer it to Abbey Mills Pumping Station, from where the Lee Tunnel will transfer it for treatment at Beckton Sewage Treatment Works ii. 11 connection tunnels, which will link flows from CSOs to the main tunnel. b. Worksites: i. five main tunnel Worksites (drive and/or reception sites) ii. 16 CSO Worksites iii. two System modification Worksites Thames Tideway Tunnel iv. works at Beckton Sewage Treatment works. Section 4: Scope of Works The Subcontract works comprise of but are not limited to the provision of all materials, labour, plant and equipment to carry out the supply and install for Architectural Metalwork across the following worksites all in accordance with the Works Information and Site Information provided below along with the specification, drawings, and other documents listed herein or as may be required by the Main Contract: 1. ACTST: Acton Storm Tanks, Canham Road, W3 7SR 2. CARRR: London Borough of Hammersmith & Fulham, Carnwath Road, London, SW6 3HR 3. DRMST: Dormay Street, Wandsworth, SW18 1EY 4. HAMPS: Hammersmith Pumping Station, Distillery Road, Hammersmith, W6 9AD 5. KNGGP: Neville Gill Close, Wandsworth, SW18 4BS 6. PUTEF: Putney Pier, Lower Embankment Road, London, SW15 1LB The Subcontractor's pricing is to include for but not limited to the following: - Production of RAMS for BMB and Tideway Approval - Allowance for 1 day of Safety Induction per person - Temporary works designs associated with the works. This includes the provision of any CAT 1, 2, or 3 which may be required to satisfy any Subcontractor temporary works designs. 4.1.1 Scope for Architectural Metalwork Works. The Subcontract works include but are not limited to: The Subcontractor shall provide all works included on drawings in section 4.7.1 for the PUTEF Mini Piling Works at the PUTEF works site as detailed below: ACTST: Scope of works include the design, supply and installation of: * Safety Grill to Ventilation Column CARRR: Scope Additional information: 1. ACTST: Acton Storm Tanks, Canham Road, W3 7SR 2. CARRR: London Borough of Hammersmith & Fulham, Carnwath Road, London, SW6 3HR 3. DRMST: Dormay Street, Wandsworth, SW18 1EY 4. HAMPS: Hammersmith Pumping Station, Distillery Road, Hammersmith, W6 9AD 5. KNGGP: Neville Gill Close, Wandsworth, SW18 4BS 6. PUTEF: Putney Pier, Lower Embankment Road, London, SW15 1LB
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-b5fd17-3113773c-f733-4e2f-ad94-5ebdaa05fdaa
- Publication Source
- Contracts Finder
- Latest Notice
- https://www.contractsfinder.service.gov.uk/Notice/b0ec890e-e4b7-421f-b8d1-32c254fe6455
- Current Stage
- Award
- All Stages
- Tender, Award
Procurement Classification
- Notice Type
- Award Notice
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Open
- Procurement Method Details
- Open procedure (below threshold)
- Tender Suitability
- Not specified
- Awardee Scale
- Large
Common Procurement Vocabulary (CPV)
- CPV Divisions
45 - Construction work
71 - Architectural, construction, engineering and inspection services
-
- CPV Codes
45223210 - Structural steelworks
45262670 - Metalworking
71220000 - Architectural design services
71320000 - Engineering design services
Notice Value(s)
- Tender Value
- £1
- Lots Value
- Not specified
- Awards Value
- £830,794 £500K-£1M
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 8 Jan 20215 years ago
- Submission Deadline
- 16 Oct 2019Expired
- Future Notice Date
- Not specified
- Award Date
- 1 Jan 20206 years ago
- Contract Period
- 1 Jan 2020 - 17 Feb 2022 2-3 years
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Not Specified
- Awards Status
- Active
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- BMB JOINT VENTURE (BAM NUTTALL, MORGAN SINDALL PLC & BALFOUR BEATTY)
- Contact Name
- Available with D3 Tenders Premium →
- Contact Email
- Available with D3 Tenders Premium →
- Contact Phone
- Available with D3 Tenders Premium →
Buyer Location
- Locality
- LONDON
- Postcode
- SW1V 1LQ
- Post Town
- South West London
- Country
- England
-
- Major Region (ITL 1)
- TLI London
- Basic Region (ITL 2)
- TLI3 Inner London - West
- Small Region (ITL 3)
- TLI35 Westminster and City of London
- Delivery Location
- TLI London
-
- Local Authority
- Westminster
- Electoral Ward
- Pimlico North
- Westminster Constituency
- Cities of London and Westminster
Further Information
Notice Documents
-
https://www.contractsfinder.service.gov.uk/Notice/b0ec890e-e4b7-421f-b8d1-32c254fe6455
8th January 2021 - Awarded contract notice on Contracts Finder -
https://www.contractsfinder.service.gov.uk/Notice/59ab9419-ec61-4b0f-ab44-9b8a91695c51
17th September 2019 - Opportunity notice on Contracts Finder -
https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=46048761
Please follow this link to view the notice.
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-b5fd17-3113773c-f733-4e2f-ad94-5ebdaa05fdaa-2021-01-08T10:32:05Z",
"date": "2021-01-08T10:32:05Z",
"ocid": "ocds-b5fd17-3113773c-f733-4e2f-ad94-5ebdaa05fdaa",
"language": "en",
"initiationType": "tender",
"tender": {
"id": "C4A46048749",
"title": "Thames Tideway Tunnel - C405 Main Works West - Architectural Metalwork",
"description": "The Thames Tideway Tunnel project (the Project) will control CSO discharges by intercepting and diverting combined sewage flows into a new storage and transfer tunnel. The main tunnel will run from Acton Storm Tanks in west London to Abbey Mills Pumping Station in the east, where it will connect to the Lee Tunnel, which will transfer the combined sewage to Beckton Sewage Treatment Works for treatment. The Project extends from Acton Storm Tanks in west London, to Abbey Mills Pumping Station in east London. The Project includes associated works at Beckton STW, Shad Thames Pumping Station and Bekesbourne Street. The geographic layout of the Project and local authorities through which it passes is shown in Figure 1. The Project comprises: a. tunnels: i. a main tunnel which will capture and store combined sewage from CSOs along its route and transfer it to Abbey Mills Pumping Station, from where the Lee Tunnel will transfer it for treatment at Beckton Sewage Treatment Works ii. 11 connection tunnels, which will link flows from CSOs to the main tunnel. b. Worksites: i. five main tunnel Worksites (drive and/or reception sites) ii. 16 CSO Worksites iii. two System modification Worksites Thames Tideway Tunnel iv. works at Beckton Sewage Treatment works. Section 4: Scope of Works The Subcontract works comprise of but are not limited to the provision of all materials, labour, plant and equipment to carry out the supply and install for Architectural Metalwork across the following worksites all in accordance with the Works Information and Site Information provided below along with the specification, drawings, and other documents listed herein or as may be required by the Main Contract: 1. ACTST: Acton Storm Tanks, Canham Road, W3 7SR 2. CARRR: London Borough of Hammersmith & Fulham, Carnwath Road, London, SW6 3HR 3. DRMST: Dormay Street, Wandsworth, SW18 1EY 4. HAMPS: Hammersmith Pumping Station, Distillery Road, Hammersmith, W6 9AD 5. KNGGP: Neville Gill Close, Wandsworth, SW18 4BS 6. PUTEF: Putney Pier, Lower Embankment Road, London, SW15 1LB The Subcontractor's pricing is to include for but not limited to the following: - Production of RAMS for BMB and Tideway Approval - Allowance for 1 day of Safety Induction per person - Temporary works designs associated with the works. This includes the provision of any CAT 1, 2, or 3 which may be required to satisfy any Subcontractor temporary works designs. 4.1.1 Scope for Architectural Metalwork Works. The Subcontract works include but are not limited to: The Subcontractor shall provide all works included on drawings in section 4.7.1 for the PUTEF Mini Piling Works at the PUTEF works site as detailed below: ACTST: Scope of works include the design, supply and installation of: * Safety Grill to Ventilation Column CARRR: Scope Additional information: 1. ACTST: Acton Storm Tanks, Canham Road, W3 7SR 2. CARRR: London Borough of Hammersmith & Fulham, Carnwath Road, London, SW6 3HR 3. DRMST: Dormay Street, Wandsworth, SW18 1EY 4. HAMPS: Hammersmith Pumping Station, Distillery Road, Hammersmith, W6 9AD 5. KNGGP: Neville Gill Close, Wandsworth, SW18 4BS 6. PUTEF: Putney Pier, Lower Embankment Road, London, SW15 1LB",
"datePublished": "2019-09-17T11:30:51+01:00",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "45223210",
"description": "Structural steelworks"
},
"additionalClassifications": [
{
"scheme": "CPV",
"id": "45262670",
"description": "Metalworking"
},
{
"scheme": "CPV",
"id": "71220000",
"description": "Architectural design services"
},
{
"scheme": "CPV",
"id": "71320000",
"description": "Engineering design services"
}
],
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"region": "London",
"countryName": "United Kingdom"
},
{
"region": "London",
"countryName": "United Kingdom"
}
]
}
],
"procurementMethodDetails": "Open procedure (below threshold)",
"tenderPeriod": {
"endDate": "2019-10-16T12:00:00+01:00"
},
"contractPeriod": {
"startDate": "2020-01-01T00:00:00Z",
"endDate": "2022-02-17T23:59:59Z"
},
"suitability": {
"sme": false,
"vcse": false
},
"mainProcurementCategory": "works",
"documents": [
{
"id": "1",
"documentType": "tenderNotice",
"description": "Opportunity notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/59ab9419-ec61-4b0f-ab44-9b8a91695c51",
"datePublished": "2019-09-17T11:30:51+01:00",
"format": "text/html",
"language": "en"
},
{
"id": "2",
"documentType": "tenderNotice",
"description": "Please follow this link to view the notice.",
"url": "https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=46048761"
}
],
"value": {
"amount": 1,
"currency": "GBP"
},
"procurementMethod": "open"
},
"parties": [
{
"id": "GB-CFS-91633",
"name": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)",
"identifier": {
"legalName": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)"
},
"address": {
"streetAddress": "130 Wilton Road",
"locality": "London",
"postalCode": "SW1V1LQ",
"countryName": "UK"
},
"contactPoint": {
"name": "Bryan Jenkinson",
"email": "bryan.jenkinson@balfourbeatty.com",
"telephone": "07590353416"
},
"roles": [
"buyer"
]
},
{
"id": "GB-CFS-129412",
"name": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)",
"identifier": {
"legalName": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)"
},
"address": {
"streetAddress": "130 Wilton Road",
"locality": "London",
"postalCode": "SW1V1LQ",
"countryName": "England"
},
"contactPoint": {
"name": "colin smith",
"email": "colin.smith@tideway-west.london",
"telephone": "07976181302"
},
"roles": [
"buyer"
]
},
{
"id": "GB-CFS-159614",
"name": "Alloy Fabweld Limited",
"identifier": {
"legalName": "Alloy Fabweld Limited"
},
"address": {
"streetAddress": "Unit 5, Zone C Chelmsford Road Industrial Estate Great Dunmow CM6 1HD"
},
"details": {
"scale": "large",
"vcse": false
},
"roles": [
"supplier"
]
}
],
"buyer": {
"id": "GB-CFS-129412",
"name": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)"
},
"awards": [
{
"id": "ocds-b5fd17-3113773c-f733-4e2f-ad94-5ebdaa05fdaa-1",
"status": "active",
"date": "2020-01-01T00:00:00Z",
"datePublished": "2021-01-08T10:32:05Z",
"value": {
"amount": 830794,
"currency": "GBP"
},
"suppliers": [
{
"id": "GB-CFS-159614",
"name": "Alloy Fabweld Limited"
}
],
"contractPeriod": {
"startDate": "2020-01-01T00:00:00Z",
"endDate": "2022-02-17T23:59:59Z"
},
"documents": [
{
"id": "1",
"documentType": "awardNotice",
"description": "Awarded contract notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/b0ec890e-e4b7-421f-b8d1-32c254fe6455",
"datePublished": "2021-01-08T10:32:05Z",
"format": "text/html",
"language": "en"
},
{
"id": "2",
"documentType": "tenderNotice",
"description": "Please follow this link to view the notice.",
"url": "https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=46048761"
}
]
}
]
}