Notice Information
Notice Title
Thames Tideway Tunnel - C405 Main Works West - Permanent Formwork Decking
Notice Description
The Thames Tideway Tunnel project (the Project) will control CSO discharges by intercepting and diverting combined sewage flows into a new storage and transfer tunnel. The main tunnel will run from Acton Storm Tanks in west London to Abbey Mills Pumping Station in the east, where it will connect to the Lee Tunnel, which will transfer the combined sewage to Beckton Sewage Treatment Works for treatment. The Project extends from Acton Storm Tanks in west London, to Abbey Mills Pumping Station in east London. The Project includes associated works at Beckton STW, Shad Thames Pumping Station and Bekesbourne Street. The geographic layout of the Project and local authorities through which it passes is shown in Figure 1. The Project comprises: a. tunnels: i. a main tunnel which will capture and store combined sewage from CSOs along its route and transfer it to Abbey Mills Pumping Station, from where the Lee Tunnel will transfer it for treatment at Beckton Sewage Treatment Works ii. 11 connection tunnels, which will link flows from CSOs to the main tunnel. b. Worksites: i. five main tunnel Worksites (drive and/or reception sites) ii. 16 CSO Worksites iii. two System modification Worksites Thames Tideway Tunnel iv. works at Beckton Sewage Treatment works. Section 4: Scope of Works Part 1) Scope of Supply Attenuation Tank:- BMB JV require fabrication and supply of permanent formwork for an Attenuation Tank at Hammersmith site. Panels shall be made to the geometry displayed in the drawings provided for the Attenuation Tank. All panels are to be laminated as the soffit will be submerged by BMB JV systematically. Panels shall be delivered to site labelled in-order to allow BMB JV to install the panels in the correct sequence. Supply of all ancillary items such as grout check and joint sealing tapes should be detailed and included in the supply. All supporting documentation for a material compliance report should be provided prior to order delivery. No openings are required as BMB JV will post cut on site. Attenuation Tank Building Drawings 3320-AAJVX-HAMPS-540-SZ-DR-000040 3320-AAJVX-HAMPS-540-SZ-DR-000041 Part 2) Hammersmith Shaft Scope of Supply: - BMB JV require fabrication and supply of permanent formwork for a drop shaft at Hammersmith site. The supplier is to conduct a design check on the panels proposed for permanent and temporary loadings and spans for the Hammersmith Shaft. Supply of all ancillary items such as grout check and joint sealing tapes should be detailed and included in the supply. Panels shall be delivered to site labelled in-order to allow BMB JV to install the panels in the correct sequence. Supplier will produce manufacturing drawings for panel layout for BMB's approval. All documentation to be supplied for panel layout to be checked by BMB temporary works department before commencement Additional information: BMB-JV Tideway West, Hammersmith Pumping Station, Distillery Road, Hammersmith, W6 9AD
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-b5fd17-32e40f0f-ba3c-4ee9-b580-4295713335e5
- Publication Source
- Contracts Finder
- Latest Notice
- https://www.contractsfinder.service.gov.uk/Notice/45069d1f-46f3-4df9-834e-56e40917a134
- Current Stage
- Award
- All Stages
- Award
Procurement Classification
- Notice Type
- Award Notice
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Not Specified
- Procurement Method Details
- Other - .
- Tender Suitability
- Not specified
- Awardee Scale
- Large
Common Procurement Vocabulary (CPV)
- CPV Divisions
44 - Construction structures and materials; auxiliary products to construction (except electric apparatus)
45 - Construction work
-
- CPV Codes
44114250 - Concrete slabs
45223500 - Reinforced-concrete structures
45262310 - Reinforced-concrete work
45262311 - Concrete carcassing work
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- £43,000 Under £100K
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 12 Mar 20214 years ago
- Submission Deadline
- 13 Nov 2020Expired
- Future Notice Date
- Not specified
- Award Date
- 1 Dec 20205 years ago
- Contract Period
- 1 Dec 2020 - 6 May 2021 1-6 months
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Not Specified
- Awards Status
- Active
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- BMB JOINT VENTURE (BAM NUTTALL, MORGAN SINDALL PLC & BALFOUR BEATTY)
- Contact Name
- Available with D3 Tenders Premium →
- Contact Email
- Available with D3 Tenders Premium →
- Contact Phone
- Available with D3 Tenders Premium →
Buyer Location
- Locality
- LONDON
- Postcode
- SW1V 1LQ
- Post Town
- South West London
- Country
- England
-
- Major Region (ITL 1)
- TLI London
- Basic Region (ITL 2)
- TLI3 Inner London - West
- Small Region (ITL 3)
- TLI35 Westminster and City of London
- Delivery Location
- TLI London
-
- Local Authority
- Westminster
- Electoral Ward
- Pimlico North
- Westminster Constituency
- Cities of London and Westminster
Further Information
Notice Documents
-
https://www.contractsfinder.service.gov.uk/Notice/45069d1f-46f3-4df9-834e-56e40917a134
12th March 2021 - Awarded contract notice on Contracts Finder -
https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=52134414
Please follow this link to view the notice.
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-b5fd17-32e40f0f-ba3c-4ee9-b580-4295713335e5-2021-03-12T15:19:35Z",
"date": "2021-03-12T15:19:35Z",
"ocid": "ocds-b5fd17-32e40f0f-ba3c-4ee9-b580-4295713335e5",
"language": "en",
"initiationType": "tender",
"tender": {
"id": "C4A52134406",
"title": "Thames Tideway Tunnel - C405 Main Works West - Permanent Formwork Decking",
"description": "The Thames Tideway Tunnel project (the Project) will control CSO discharges by intercepting and diverting combined sewage flows into a new storage and transfer tunnel. The main tunnel will run from Acton Storm Tanks in west London to Abbey Mills Pumping Station in the east, where it will connect to the Lee Tunnel, which will transfer the combined sewage to Beckton Sewage Treatment Works for treatment. The Project extends from Acton Storm Tanks in west London, to Abbey Mills Pumping Station in east London. The Project includes associated works at Beckton STW, Shad Thames Pumping Station and Bekesbourne Street. The geographic layout of the Project and local authorities through which it passes is shown in Figure 1. The Project comprises: a. tunnels: i. a main tunnel which will capture and store combined sewage from CSOs along its route and transfer it to Abbey Mills Pumping Station, from where the Lee Tunnel will transfer it for treatment at Beckton Sewage Treatment Works ii. 11 connection tunnels, which will link flows from CSOs to the main tunnel. b. Worksites: i. five main tunnel Worksites (drive and/or reception sites) ii. 16 CSO Worksites iii. two System modification Worksites Thames Tideway Tunnel iv. works at Beckton Sewage Treatment works. Section 4: Scope of Works Part 1) Scope of Supply Attenuation Tank:- BMB JV require fabrication and supply of permanent formwork for an Attenuation Tank at Hammersmith site. Panels shall be made to the geometry displayed in the drawings provided for the Attenuation Tank. All panels are to be laminated as the soffit will be submerged by BMB JV systematically. Panels shall be delivered to site labelled in-order to allow BMB JV to install the panels in the correct sequence. Supply of all ancillary items such as grout check and joint sealing tapes should be detailed and included in the supply. All supporting documentation for a material compliance report should be provided prior to order delivery. No openings are required as BMB JV will post cut on site. Attenuation Tank Building Drawings 3320-AAJVX-HAMPS-540-SZ-DR-000040 3320-AAJVX-HAMPS-540-SZ-DR-000041 Part 2) Hammersmith Shaft Scope of Supply: - BMB JV require fabrication and supply of permanent formwork for a drop shaft at Hammersmith site. The supplier is to conduct a design check on the panels proposed for permanent and temporary loadings and spans for the Hammersmith Shaft. Supply of all ancillary items such as grout check and joint sealing tapes should be detailed and included in the supply. Panels shall be delivered to site labelled in-order to allow BMB JV to install the panels in the correct sequence. Supplier will produce manufacturing drawings for panel layout for BMB's approval. All documentation to be supplied for panel layout to be checked by BMB temporary works department before commencement Additional information: BMB-JV Tideway West, Hammersmith Pumping Station, Distillery Road, Hammersmith, W6 9AD",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "44114250",
"description": "Concrete slabs"
},
"additionalClassifications": [
{
"scheme": "CPV",
"id": "45223500",
"description": "Reinforced-concrete structures"
},
{
"scheme": "CPV",
"id": "45262310",
"description": "Reinforced-concrete work"
},
{
"scheme": "CPV",
"id": "45262311",
"description": "Concrete carcassing work"
}
],
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"region": "London",
"countryName": "United Kingdom"
}
]
}
],
"procurementMethodDetails": "Other - .",
"tenderPeriod": {
"endDate": "2020-11-13T12:00:00Z"
},
"contractPeriod": {
"startDate": "2020-12-01T00:00:00Z",
"endDate": "2021-05-06T23:59:59+01:00"
},
"suitability": {
"sme": false,
"vcse": false
},
"mainProcurementCategory": "works"
},
"parties": [
{
"id": "GB-CFS-129412",
"name": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)",
"identifier": {
"legalName": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)"
},
"address": {
"streetAddress": "130 Wilton Road",
"locality": "London",
"postalCode": "SW1V1LQ",
"countryName": "England"
},
"contactPoint": {
"name": "colin smith",
"email": "colin.smith@tideway-west.london",
"telephone": "07976181302"
},
"roles": [
"buyer"
]
},
{
"id": "GB-CFS-173",
"details": {
"scale": "large",
"vcse": false
},
"roles": [
"supplier"
]
}
],
"buyer": {
"id": "GB-CFS-129412",
"name": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)"
},
"awards": [
{
"id": "ocds-b5fd17-32e40f0f-ba3c-4ee9-b580-4295713335e5-1",
"status": "active",
"date": "2020-12-01T00:00:00Z",
"datePublished": "2021-03-12T15:19:35Z",
"value": {
"amount": 43000,
"currency": "GBP"
},
"suppliers": [
{
"id": "GB-CFS-173"
}
],
"contractPeriod": {
"startDate": "2020-12-01T00:00:00Z",
"endDate": "2021-05-06T23:59:59+01:00"
},
"documents": [
{
"id": "1",
"documentType": "awardNotice",
"description": "Awarded contract notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/45069d1f-46f3-4df9-834e-56e40917a134",
"datePublished": "2021-03-12T15:19:35Z",
"format": "text/html",
"language": "en"
},
{
"id": "2",
"documentType": "tenderNotice",
"description": "Please follow this link to view the notice.",
"url": "https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=52134414"
}
]
}
]
}