Notice Information
Notice Title
*CANCELLED* - Consolidation Station for COMPASS (Composites at Speed and Scale) Facility
Notice Description
The University of Sheffield wishes to invite tenders for a 'Consolidation Station' on behalf of the Advanced Manufacturing Research Centre, Castings Group at Catcliffe, South Yorkshire. The AMRC has recently won HICOMS funding for an 'automated, large scale composites manufacturing centre', including a 'fully automated layup and consolidation cell' which will incorporate a 'Consolidation Station'. Within the 'Fully Automated Layup and consolidation cell' the 'Consolidation Station' will sit alongside a variety of other equipment, and will be in close proximity to the following:- -High Volume Deposition Cell - including Robot arms and guide rails -Press -Stringers Table Please note that it is anticipated that the 'Consolidation Station' will be required to be ready for installation and SAT no earlier than March 2025 due to building of the COMPASS facility which is currently under construction. Use and Description The 'Consolidation Station' is to be used for manufacturing research into the production of large polymer composite components using several potential processes, including (but not limited to): - -Dry fibre pre-forming -Resin Transfer Moulding (RTM) -Gap RTM/ Infusion -Wet Compression Moulding and Compression Moulding of pre-preg. The 'Consolidation Station' will be used with a large pick and place robot system (known within the AMRC as the High Volume Deposition Cell (HVDC) for the placement of plies). The HVDC is will robotically place fabric or prepreg plies onto the tool in the 'Consolidation Station'. After a number of plies have been placed, a membrane/diaphragm will be positioned over the tool and air evacuated between the membrane/diaphragm and tool to consolidate the plies with atmospheric pressure. During this consolidation process the membrane/diaphragm/tool/plies will be heated and cooled to melt and set a polymer binder The 'Consolidation Station' is expected to have significant flexibility in its range of use and application, unlike a more dedicated production solution. In summary the design, build, Delivery, Installation/Commissioning/Acceptance Testing (FAT and SAT), Training, documentation (in English), warranty and annual service/maintenance are to be provided by the successful tenderer. Tender Process and Documentation: This procurement is an open procedure The ITT can be downloaded by registering and expressing your interest on the University's e-tendering system https://in-tendhost.co.uk/Sheffield If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield Completed tenders must be returned through the same e-tendering system. Closing date for receipt of tenders: Friday 22nd March 2024 at 12 noon (UK time). Additional information: All expressions of interest must be made through The University of Sheffield's e-tendering portal: https://www.in-tendhost.co.uk/sheffield/ This is an open-tender exercise . The ITT can be downloaded by registering and expressing an interest on The University of Sheffield's e-tendering system:- https://www.in-tendhost.co.uk/sheffield/ If you have any questions or comments in relation to this tender they must be submitted by the In-Tend system. This can be accessed at https://www.in-tendhost.co.uk/sheffield/ Completed tenders must be returned through the same e-tendering system. Closing date for receipt of tenders is - Friday 1 March 2024 at 12 noon (UK time) Please note: The University of Sheffield is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (Directive 2014/24/EU) as amended by the Public Procurement (Amendment) (EU Exit) Regulations 2020. The University reserves the right from time to time to voluntarily operate under the Public Contract Regulations (as defined above) on a case by case basis. Otherwise, advertisement of any contract in Find a Tender Service or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation. For the avoidance of doubt, this procurement is not subject to the Public Contract Regulations (as defined above). Delivery notes:- Delivery (plus installation/commissioning/acceptance) to AMRC Factory 2050, Europa Avenue, Tinsley, Sheffield, S9 1ZA
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-b5fd17-53939592-b587-4733-b67e-862aabb991b5
- Publication Source
- Contracts Finder
- Latest Notice
- https://www.contractsfinder.service.gov.uk/Notice/15e9bba5-1667-4f74-b4d5-becf8c313161
- Current Stage
- Tender
- All Stages
- Tender
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Open
- Procurement Method Details
- Open procedure (above threshold)
- Tender Suitability
- SME
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
42 - Industrial machinery
-
- CPV Codes
42600000 - Machine tools
42900000 - Miscellaneous general and special-purpose machinery
Notice Value(s)
- Tender Value
- £400,000 £100K-£500K
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 28 Mar 20241 years ago
- Submission Deadline
- 22 Mar 2024Expired
- Future Notice Date
- Not specified
- Award Date
- Not specified
- Contract Period
- 29 Apr 2024 - 29 Apr 2027 2-3 years
- Recurrence
- Not specified
Notice Status
- Tender Status
- Active
- Lots Status
- Not Specified
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNIVERSITY OF SHEFFIELD
- Contact Name
- Available with D3 Tenders Premium →
- Contact Email
- Available with D3 Tenders Premium →
- Contact Phone
- Available with D3 Tenders Premium →
Buyer Location
- Locality
- SHEFFIELD
- Postcode
- S10 2TN
- Post Town
- Sheffield
- Country
- England
-
- Major Region (ITL 1)
- TLE Yorkshire and The Humber
- Basic Region (ITL 2)
- TLE3 South Yorkshire
- Small Region (ITL 3)
- TLE32 Sheffield
- Delivery Location
- Not specified
-
- Local Authority
- Sheffield
- Electoral Ward
- Broomhill and Sharrow Vale
- Westminster Constituency
- Sheffield Central
Further Information
Notice Documents
-
https://www.contractsfinder.service.gov.uk/Notice/15e9bba5-1667-4f74-b4d5-becf8c313161
28th March 2024 - Opportunity notice on Contracts Finder
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-b5fd17-53939592-b587-4733-b67e-862aabb991b5-2024-03-28T11:29:02Z",
"date": "2024-03-28T11:29:02Z",
"ocid": "ocds-b5fd17-53939592-b587-4733-b67e-862aabb991b5",
"language": "en",
"initiationType": "tender",
"tender": {
"id": "*CANCELLED* - 3896/COMPASS/CONSOLIDATION STATION/JS/24",
"title": "*CANCELLED* - Consolidation Station for COMPASS (Composites at Speed and Scale) Facility",
"description": "The University of Sheffield wishes to invite tenders for a 'Consolidation Station' on behalf of the Advanced Manufacturing Research Centre, Castings Group at Catcliffe, South Yorkshire. The AMRC has recently won HICOMS funding for an 'automated, large scale composites manufacturing centre', including a 'fully automated layup and consolidation cell' which will incorporate a 'Consolidation Station'. Within the 'Fully Automated Layup and consolidation cell' the 'Consolidation Station' will sit alongside a variety of other equipment, and will be in close proximity to the following:- -High Volume Deposition Cell - including Robot arms and guide rails -Press -Stringers Table Please note that it is anticipated that the 'Consolidation Station' will be required to be ready for installation and SAT no earlier than March 2025 due to building of the COMPASS facility which is currently under construction. Use and Description The 'Consolidation Station' is to be used for manufacturing research into the production of large polymer composite components using several potential processes, including (but not limited to): - -Dry fibre pre-forming -Resin Transfer Moulding (RTM) -Gap RTM/ Infusion -Wet Compression Moulding and Compression Moulding of pre-preg. The 'Consolidation Station' will be used with a large pick and place robot system (known within the AMRC as the High Volume Deposition Cell (HVDC) for the placement of plies). The HVDC is will robotically place fabric or prepreg plies onto the tool in the 'Consolidation Station'. After a number of plies have been placed, a membrane/diaphragm will be positioned over the tool and air evacuated between the membrane/diaphragm and tool to consolidate the plies with atmospheric pressure. During this consolidation process the membrane/diaphragm/tool/plies will be heated and cooled to melt and set a polymer binder The 'Consolidation Station' is expected to have significant flexibility in its range of use and application, unlike a more dedicated production solution. In summary the design, build, Delivery, Installation/Commissioning/Acceptance Testing (FAT and SAT), Training, documentation (in English), warranty and annual service/maintenance are to be provided by the successful tenderer. Tender Process and Documentation: This procurement is an open procedure The ITT can be downloaded by registering and expressing your interest on the University's e-tendering system https://in-tendhost.co.uk/Sheffield If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield Completed tenders must be returned through the same e-tendering system. Closing date for receipt of tenders: Friday 22nd March 2024 at 12 noon (UK time). Additional information: All expressions of interest must be made through The University of Sheffield's e-tendering portal: https://www.in-tendhost.co.uk/sheffield/ This is an open-tender exercise . The ITT can be downloaded by registering and expressing an interest on The University of Sheffield's e-tendering system:- https://www.in-tendhost.co.uk/sheffield/ If you have any questions or comments in relation to this tender they must be submitted by the In-Tend system. This can be accessed at https://www.in-tendhost.co.uk/sheffield/ Completed tenders must be returned through the same e-tendering system. Closing date for receipt of tenders is - Friday 1 March 2024 at 12 noon (UK time) Please note: The University of Sheffield is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (Directive 2014/24/EU) as amended by the Public Procurement (Amendment) (EU Exit) Regulations 2020. The University reserves the right from time to time to voluntarily operate under the Public Contract Regulations (as defined above) on a case by case basis. Otherwise, advertisement of any contract in Find a Tender Service or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation. For the avoidance of doubt, this procurement is not subject to the Public Contract Regulations (as defined above). Delivery notes:- Delivery (plus installation/commissioning/acceptance) to AMRC Factory 2050, Europa Avenue, Tinsley, Sheffield, S9 1ZA",
"datePublished": "2024-02-09T09:33:07Z",
"status": "active",
"classification": {
"scheme": "CPV",
"id": "42600000",
"description": "Machine tools"
},
"additionalClassifications": [
{
"scheme": "CPV",
"id": "42900000",
"description": "Miscellaneous general and special-purpose machinery"
}
],
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"postalCode": "S60 5TZ"
},
{
"postalCode": "S60 5TZ"
},
{
"postalCode": "S60 5TZ"
},
{
"postalCode": "S60 5TZ"
}
]
}
],
"value": {
"amount": 400000,
"currency": "GBP"
},
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure (above threshold)",
"tenderPeriod": {
"endDate": "2024-03-22T12:00:00Z"
},
"contractPeriod": {
"startDate": "2024-04-30T00:00:00+01:00",
"endDate": "2027-04-29T23:59:59+01:00"
},
"suitability": {
"sme": true,
"vcse": false
},
"mainProcurementCategory": "goods",
"documents": [
{
"id": "1",
"documentType": "tenderNotice",
"description": "Opportunity notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/15e9bba5-1667-4f74-b4d5-becf8c313161",
"datePublished": "2024-02-09T09:33:07Z",
"dateModified": "2024-03-28T11:29:02Z",
"format": "text/html",
"language": "en"
}
]
},
"parties": [
{
"id": "GB-SRS-sid4gov.cabinetoffice.gov.uk/JYFy743W",
"name": "UNIVERSITY OF SHEFFIELD",
"identifier": {
"legalName": "UNIVERSITY OF SHEFFIELD",
"scheme": "GB-SRS",
"id": "sid4gov.cabinetoffice.gov.uk/JYFy743W"
},
"address": {
"streetAddress": "THE UNIVERSITY OF SHEFFIELD, WESTERN BANK",
"locality": "SHEFFIELD",
"postalCode": "S102TN",
"countryName": "England"
},
"contactPoint": {
"name": "Jamie Shaw",
"email": "jamie.shaw@sheffield.ac.uk",
"telephone": "01142221516"
},
"details": {
"url": "https://in-tendhost.co.uk/Sheffield"
},
"roles": [
"buyer"
]
}
],
"buyer": {
"id": "GB-SRS-sid4gov.cabinetoffice.gov.uk/JYFy743W",
"name": "UNIVERSITY OF SHEFFIELD"
}
}