Notice Information
Notice Title
Thames Tideway Tunnel - C405 Main Works West - Bulkheads (Hammersmith)
Notice Description
The Thames Tideway Tunnel project (the Project) will control CSO discharges by intercepting and diverting combined sewage flows into a new storage and transfer tunnel. The main tunnel will run from Acton Storm Tanks in west London to Abbey Mills Pumping Station in the east, where it will connect to the Lee Tunnel, which will transfer the combined sewage to Beckton Sewage Treatment Works for treatment. The Project extends from Acton Storm Tanks in west London, to Abbey Mills Pumping Station in east London. The Project includes associated works at Beckton STW, Shad Thames Pumping Station and Bekesbourne Street. The geographic layout of the Project and local authorities through which it passes is shown in Figure 1. The Project comprises: a. tunnels: i. a main tunnel which will capture and store combined sewage from CSOs along its route and transfer it to Abbey Mills Pumping Station, from where the Lee Tunnel will transfer it for treatment at Beckton Sewage Treatment Works ii. 11 connection tunnels, which will link flows from CSOs to the main tunnel. b. Worksites: i. five main tunnel Worksites (drive and/or reception sites) ii. 16 CSO Worksites iii. two System modification Worksites Thames Tideway Tunnel iv. works at Beckton Sewage Treatment works. Section 4: Scope of Works Supply only of 4no. Bulkheads highlighted in red the overhead drawing no.3350-BAMNU-HAMPS-450-CZ-DR- 200027 Hammersmith site has requirement for bulkheads that will close openings that have been cast into Wall A. Their primary function is to protect the Chamber as the Inlet Channel breaks through into the new structure. The rubber gaskets create a watertight seal to stop inlet channel sewage from entering the chamber, delaying its use as a live sewer and therefore maintaining a working environment that does not need monitoring or confined space procedures. Returned quotations will be evaluated by BMB JV's (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty) Procurement team in conjunction with our design and engineering teams. Quotations will be evaluated based on; Cost Timeliness of return Adherence to and demonstration of understanding of the drawings and specifications provided at this point. Provision of accurate product specifications to accompany the quotation. Supplier experience of similar projects,evidence of this will be requested should the initial quotation be of interest. Should the candidate supplier be shortlisted they will then be contacted directly by a member of the BMB Procurement Team within two weeks of shortlisting to discuss the requirement in detail. BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty) Hammersmith Site Additional information: Hammersmith Site
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-b5fd17-75c49e4a-0c4c-48e3-afab-e7323bb86ca1
- Publication Source
- Contracts Finder
- Latest Notice
- https://www.contractsfinder.service.gov.uk/Notice/b0bce49f-0a82-4434-b528-3207f8277a31
- Current Stage
- Award
- All Stages
- Tender, Award
Procurement Classification
- Notice Type
- Award Notice
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Open
- Procurement Method Details
- Open procedure (below threshold)
- Tender Suitability
- Not specified
- Awardee Scale
- Large
Common Procurement Vocabulary (CPV)
- CPV Divisions
45 - Construction work
-
- CPV Codes
45262670 - Metalworking
Notice Value(s)
- Tender Value
- £1
- Lots Value
- Not specified
- Awards Value
- £12,191 Under £100K
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 8 Jan 20215 years ago
- Submission Deadline
- 10 Feb 2020Expired
- Future Notice Date
- Not specified
- Award Date
- 13 Feb 20206 years ago
- Contract Period
- 13 Feb 2020 - 24 Feb 2020 30 days
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Not Specified
- Awards Status
- Active
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- BMB JOINT VENTURE (BAM NUTTALL, MORGAN SINDALL PLC & BALFOUR BEATTY)
- Contact Name
- Bryan Jenkinson, colin smith
- Contact Email
- bryan.jenkinson@balfourbeatty.com, colin.smith@tideway-west.london
- Contact Phone
- 07590353416, 07976181302
Buyer Location
- Locality
- LONDON
- Postcode
- SW1V 1LQ
- Post Town
- South West London
- Country
- England
-
- Major Region (ITL 1)
- TLI London
- Basic Region (ITL 2)
- TLI3 Inner London - West
- Small Region (ITL 3)
- TLI35 Westminster and City of London
- Delivery Location
- TLI London
-
- Local Authority
- Westminster
- Electoral Ward
- Pimlico North
- Westminster Constituency
- Cities of London and Westminster
Further Information
Notice Documents
-
https://www.contractsfinder.service.gov.uk/Notice/b0bce49f-0a82-4434-b528-3207f8277a31
8th January 2021 - Awarded contract notice on Contracts Finder -
https://www.contractsfinder.service.gov.uk/Notice/95005fc5-067a-43b2-8475-ed2b6110ab92
4th February 2020 - Opportunity notice on Contracts Finder -
https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=47740299
Please follow this link to view the notice.
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-b5fd17-75c49e4a-0c4c-48e3-afab-e7323bb86ca1-2021-01-08T10:33:00Z",
"date": "2021-01-08T10:33:00Z",
"ocid": "ocds-b5fd17-75c49e4a-0c4c-48e3-afab-e7323bb86ca1",
"language": "en",
"initiationType": "tender",
"tender": {
"id": "C4A47740292",
"title": "Thames Tideway Tunnel - C405 Main Works West - Bulkheads (Hammersmith)",
"description": "The Thames Tideway Tunnel project (the Project) will control CSO discharges by intercepting and diverting combined sewage flows into a new storage and transfer tunnel. The main tunnel will run from Acton Storm Tanks in west London to Abbey Mills Pumping Station in the east, where it will connect to the Lee Tunnel, which will transfer the combined sewage to Beckton Sewage Treatment Works for treatment. The Project extends from Acton Storm Tanks in west London, to Abbey Mills Pumping Station in east London. The Project includes associated works at Beckton STW, Shad Thames Pumping Station and Bekesbourne Street. The geographic layout of the Project and local authorities through which it passes is shown in Figure 1. The Project comprises: a. tunnels: i. a main tunnel which will capture and store combined sewage from CSOs along its route and transfer it to Abbey Mills Pumping Station, from where the Lee Tunnel will transfer it for treatment at Beckton Sewage Treatment Works ii. 11 connection tunnels, which will link flows from CSOs to the main tunnel. b. Worksites: i. five main tunnel Worksites (drive and/or reception sites) ii. 16 CSO Worksites iii. two System modification Worksites Thames Tideway Tunnel iv. works at Beckton Sewage Treatment works. Section 4: Scope of Works Supply only of 4no. Bulkheads highlighted in red the overhead drawing no.3350-BAMNU-HAMPS-450-CZ-DR- 200027 Hammersmith site has requirement for bulkheads that will close openings that have been cast into Wall A. Their primary function is to protect the Chamber as the Inlet Channel breaks through into the new structure. The rubber gaskets create a watertight seal to stop inlet channel sewage from entering the chamber, delaying its use as a live sewer and therefore maintaining a working environment that does not need monitoring or confined space procedures. Returned quotations will be evaluated by BMB JV's (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty) Procurement team in conjunction with our design and engineering teams. Quotations will be evaluated based on; Cost Timeliness of return Adherence to and demonstration of understanding of the drawings and specifications provided at this point. Provision of accurate product specifications to accompany the quotation. Supplier experience of similar projects,evidence of this will be requested should the initial quotation be of interest. Should the candidate supplier be shortlisted they will then be contacted directly by a member of the BMB Procurement Team within two weeks of shortlisting to discuss the requirement in detail. BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty) Hammersmith Site Additional information: Hammersmith Site",
"datePublished": "2020-02-04T11:00:54Z",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "45262670",
"description": "Metalworking"
},
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"region": "London",
"countryName": "United Kingdom"
},
{
"region": "London",
"countryName": "United Kingdom"
}
]
}
],
"procurementMethodDetails": "Open procedure (below threshold)",
"tenderPeriod": {
"endDate": "2020-02-10T12:00:00Z"
},
"contractPeriod": {
"startDate": "2020-02-13T00:00:00Z",
"endDate": "2020-02-24T23:59:59Z"
},
"suitability": {
"sme": false,
"vcse": false
},
"mainProcurementCategory": "works",
"documents": [
{
"id": "1",
"documentType": "tenderNotice",
"description": "Opportunity notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/95005fc5-067a-43b2-8475-ed2b6110ab92",
"datePublished": "2020-02-04T11:00:54Z",
"format": "text/html",
"language": "en"
},
{
"id": "2",
"documentType": "tenderNotice",
"description": "Please follow this link to view the notice.",
"url": "https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=47740299"
}
],
"value": {
"amount": 1,
"currency": "GBP"
},
"procurementMethod": "open"
},
"parties": [
{
"id": "GB-CFS-91633",
"name": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)",
"identifier": {
"legalName": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)"
},
"address": {
"streetAddress": "130 Wilton Road",
"locality": "London",
"postalCode": "SW1V1LQ",
"countryName": "UK"
},
"contactPoint": {
"name": "Bryan Jenkinson",
"email": "bryan.jenkinson@balfourbeatty.com",
"telephone": "07590353416"
},
"roles": [
"buyer"
]
},
{
"id": "GB-CFS-129412",
"name": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)",
"identifier": {
"legalName": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)"
},
"address": {
"streetAddress": "130 Wilton Road",
"locality": "London",
"postalCode": "SW1V1LQ",
"countryName": "England"
},
"contactPoint": {
"name": "colin smith",
"email": "colin.smith@tideway-west.london",
"telephone": "07976181302"
},
"roles": [
"buyer"
]
},
{
"id": "GB-CFS-173",
"details": {
"scale": "large",
"vcse": false
},
"roles": [
"supplier"
]
}
],
"buyer": {
"id": "GB-CFS-129412",
"name": "BMB Joint Venture (BAM Nuttall, Morgan Sindall PLC & Balfour Beatty)"
},
"awards": [
{
"id": "ocds-b5fd17-75c49e4a-0c4c-48e3-afab-e7323bb86ca1-1",
"status": "active",
"date": "2020-02-13T00:00:00Z",
"datePublished": "2021-01-08T10:33:00Z",
"value": {
"amount": 12191,
"currency": "GBP"
},
"suppliers": [
{
"id": "GB-CFS-173"
}
],
"contractPeriod": {
"startDate": "2020-02-13T00:00:00Z",
"endDate": "2020-02-24T23:59:59Z"
},
"documents": [
{
"id": "1",
"documentType": "awardNotice",
"description": "Awarded contract notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/b0bce49f-0a82-4434-b528-3207f8277a31",
"datePublished": "2021-01-08T10:33:00Z",
"format": "text/html",
"language": "en"
},
{
"id": "2",
"documentType": "tenderNotice",
"description": "Please follow this link to view the notice.",
"url": "https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=47740299"
}
]
}
]
}