Notice Information
Notice Title
EKFB Princess Risborough to Aylesbury (PRA) Overbridge Pier Cladding and Finishing
Notice Description
Title Cladding and Sprayed Concrete Design and planning of the works before physical works commence. The Subcontractor is required to support the Contractor during the planning phase to ensure an optimum design and delivery of the asset. To deliver the above the Subcontractor will, at least: - Attend weekly progress meetings, and actively engage providing ideas and solutions. - Provide constructibility report for the works. - Provide programme for the works. Special attention to those elements that require long lead in i.e., procurement of pre-cast elements moulds, and therefore require early procurement/instructions. For the Construction of the works The Subcontract Works includes for the provision of all management, labour, materials, plant and equipment, supervision, and other resources necessary and ancillary to safely complete the construction and handover of cladding of the PRA OB pier piles, as described in the specifications, drawings, HS2 standards and other documents provided: Pier Cladding Update- Performance Criteria Options Precast concrete 160 mm to 200mm thick discussed. Steel sections bracketed to pile. GRP sections fixed to outside of pile with compressible liner/ infill. Formwork with pile wrapping and RC wrapping mesh/ rebar. Design Criteria for finisher pier cladding. Pier cladding noted on drawings 3200mm precast cladding 200 mm thick. Maximum outside diameter = 3200mm. Minimum inside diameter = 2800mm. Arrangement allows for overall out of position of installed pile of 100mm maximum. Assuming 2600mm Dia pile cap. Corbel support from pile designed to support self-weight of pier cladding. Cladding to be isolated from pier architectural non-participating with respect to capacity of pile. Differential movement to be allowed of minimum 10mm if fully infilled or grouted. Potential to leave unfilled and sealed from water ingress at top. Options for applying Cladding to uneven concrete pile. Potential to use Steel shell. Potential to use GRP cladding. Height of Cladded Pile approximately 5m Max SW cladding = 225 high density (25kN/m3 ) thick casing . Shell with compressible layer/ foam infill to ensure non-structural. Allowance has been made for grout infill if necessary but compressible layer required to isolate cladding from load effects. Additional information: Currently No Specification - Supply Chain involvement in the Design required
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-b5fd17-a52103e7-7e45-45b9-bb1b-8b33f5e1bbce
- Publication Source
- Contracts Finder
- Latest Notice
- https://www.contractsfinder.service.gov.uk/Notice/6e7c674e-8286-4c4b-9f2e-44168bd95329
- Current Stage
- Tender
- All Stages
- Tender
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Not Specified
- Procurement Method Details
- Tender Suitability
- SME
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
44 - Construction structures and materials; auxiliary products to construction (except electric apparatus)
45 - Construction work
-
- CPV Codes
44212381 - Cladding
45262650 - Cladding works
Notice Value(s)
- Tender Value
- £2,500,000 £1M-£10M
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 5 Oct 20232 years ago
- Submission Deadline
- 18 Oct 2023Expired
- Future Notice Date
- Not specified
- Award Date
- Not specified
- Contract Period
- 30 Mar 2024 - 27 Dec 2024 6-12 months
- Recurrence
- Not specified
Notice Status
- Tender Status
- Active
- Lots Status
- Not Specified
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- EIFFAGE KIER JV HS2 MAIN CIVILS WORKS, LOTS C2 & C3
- Contact Name
- Chris Read
- Contact Email
- supplychainenquiries@ekfb.com
- Contact Phone
- 07792825436
Buyer Location
- Locality
- BIRMINGHAM
- Postcode
- B3 2DT
- Post Town
- Birmingham
- Country
- England
-
- Major Region (ITL 1)
- TLG West Midlands (England)
- Basic Region (ITL 2)
- TLG3 West Midlands
- Small Region (ITL 3)
- TLG31 Birmingham
- Delivery Location
- TLF East Midlands (England), TLG West Midlands (England), TLJ South East (England)
-
- Local Authority
- Birmingham
- Electoral Ward
- Ladywood
- Westminster Constituency
- Birmingham Ladywood
Further Information
Notice Documents
-
https://www.contractsfinder.service.gov.uk/Notice/6e7c674e-8286-4c4b-9f2e-44168bd95329
5th October 2023 - Opportunity notice on Contracts Finder -
https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=74459723
Please follow this link to view the notice.
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-b5fd17-a52103e7-7e45-45b9-bb1b-8b33f5e1bbce-2023-10-05T10:55:04+01:00",
"date": "2023-10-05T10:55:04+01:00",
"ocid": "ocds-b5fd17-a52103e7-7e45-45b9-bb1b-8b33f5e1bbce",
"language": "en",
"initiationType": "tender",
"tender": {
"id": "C4N74459699",
"title": "EKFB Princess Risborough to Aylesbury (PRA) Overbridge Pier Cladding and Finishing",
"description": "Title Cladding and Sprayed Concrete Design and planning of the works before physical works commence. The Subcontractor is required to support the Contractor during the planning phase to ensure an optimum design and delivery of the asset. To deliver the above the Subcontractor will, at least: - Attend weekly progress meetings, and actively engage providing ideas and solutions. - Provide constructibility report for the works. - Provide programme for the works. Special attention to those elements that require long lead in i.e., procurement of pre-cast elements moulds, and therefore require early procurement/instructions. For the Construction of the works The Subcontract Works includes for the provision of all management, labour, materials, plant and equipment, supervision, and other resources necessary and ancillary to safely complete the construction and handover of cladding of the PRA OB pier piles, as described in the specifications, drawings, HS2 standards and other documents provided: Pier Cladding Update- Performance Criteria Options Precast concrete 160 mm to 200mm thick discussed. Steel sections bracketed to pile. GRP sections fixed to outside of pile with compressible liner/ infill. Formwork with pile wrapping and RC wrapping mesh/ rebar. Design Criteria for finisher pier cladding. Pier cladding noted on drawings 3200mm precast cladding 200 mm thick. Maximum outside diameter = 3200mm. Minimum inside diameter = 2800mm. Arrangement allows for overall out of position of installed pile of 100mm maximum. Assuming 2600mm Dia pile cap. Corbel support from pile designed to support self-weight of pier cladding. Cladding to be isolated from pier architectural non-participating with respect to capacity of pile. Differential movement to be allowed of minimum 10mm if fully infilled or grouted. Potential to leave unfilled and sealed from water ingress at top. Options for applying Cladding to uneven concrete pile. Potential to use Steel shell. Potential to use GRP cladding. Height of Cladded Pile approximately 5m Max SW cladding = 225 high density (25kN/m3 ) thick casing . Shell with compressible layer/ foam infill to ensure non-structural. Allowance has been made for grout infill if necessary but compressible layer required to isolate cladding from load effects. Additional information: Currently No Specification - Supply Chain involvement in the Design required",
"datePublished": "2023-10-05T10:55:04+01:00",
"status": "active",
"classification": {
"scheme": "CPV",
"id": "45262650",
"description": "Cladding works"
},
"additionalClassifications": [
{
"scheme": "CPV",
"id": "44212381",
"description": "Cladding"
}
],
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"region": "East Midlands",
"countryName": "United Kingdom"
},
{
"region": "West Midlands",
"countryName": "United Kingdom"
},
{
"region": "South East",
"countryName": "United Kingdom"
}
]
}
],
"minValue": {
"amount": 1000000,
"currency": "GBP"
},
"value": {
"amount": 2500000,
"currency": "GBP"
},
"tenderPeriod": {
"endDate": "2023-10-18T17:30:00+01:00"
},
"contractPeriod": {
"startDate": "2024-03-30T00:00:00Z",
"endDate": "2024-12-27T23:59:59Z"
},
"suitability": {
"sme": true,
"vcse": false
},
"mainProcurementCategory": "works",
"documents": [
{
"id": "1",
"documentType": "tenderNotice",
"description": "Opportunity notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/6e7c674e-8286-4c4b-9f2e-44168bd95329",
"datePublished": "2023-10-05T10:55:04+01:00",
"format": "text/html",
"language": "en"
},
{
"id": "2",
"documentType": "tenderNotice",
"description": "Please follow this link to view the notice.",
"url": "https://www.competefor.com/business/viewOpportunityDetailsSupplier.html?id=74459723"
}
]
},
"parties": [
{
"id": "GB-CFS-179525",
"name": "Eiffage Kier JV HS2 Main Civils Works, Lots C2 & C3",
"identifier": {
"legalName": "Eiffage Kier JV HS2 Main Civils Works, Lots C2 & C3"
},
"address": {
"streetAddress": "Floor 5, 19 Cornwall Street",
"locality": "Birmingham",
"postalCode": "B3 2DT",
"countryName": "UK"
},
"contactPoint": {
"name": "Chris Read",
"email": "supplychainenquiries@ekfb.com",
"telephone": "07792825436"
},
"roles": [
"buyer"
]
}
],
"buyer": {
"id": "GB-CFS-179525",
"name": "Eiffage Kier JV HS2 Main Civils Works, Lots C2 & C3"
}
}