Notice Information
Notice Title
SMG Racking Inspections
Notice Description
SMG wishes to appoint a supplier for inspection of racking and shelving. The company should be an approved SEMA (Storage Equipment Manufacturers Association) inspector or SARI. The inspections will be required at all the sites within SMG. The below definition explains what SMG considers to be racking: o Any type of framework of fixed or adjustable design which supports a load without the use of shelves (e.g., pallet racking) o Contains mechanical components/moving parts in the storage system (mechanical racking). o Stillages All other storage systems may be considered shelving or bookshelves. To ensure certain types of shelving are suitable for purpose, SMG have also deemed there to be a category of enhanced inspection shelving. This shelving is defined as: o Shelving which supports loads whereby one person could not comfortably lift the loads without assistance (based on manual handling guidelines) or the use of equipment such as ladders. o Extensive large shelving which supports a lot of material/stock The service should be on an annual basis unless the inspection results dictate otherwise. The appointed supplier will undertake a full asset verification during the first visit to each location, and throughout the contract, maintain an up-to-date asset list, adding and removing items as required. Access to the asset list, inspection reports, recommendations etc via a web portal/electronic system. The supplier should be independent from any racking manufacturer and be able to inspect all the types of racking as outlined above. The inspection should include all elements required under the relevant legislation, SEMA guidelines and best practices. In addition, identify if and where safe working load or SEMA notices are required, check existing signage for correct details and locations. Where the safe working load notices are missing, or the racking is historic in nature the safe load must be determined and notified to SMG. Where defects are noticed during the inspection the report must highlight this along with a time period for the repair. Any defects leading to serious safety risk should be notified to the local Estates Team immediately along with the required actions. Where defects are noted, a quote should follow to undertake the repairs. SMG will not be obliged to act on this quote. Some of the SMG sites are very large with asset locates across different buildings and numerous floors, the time and to travel within the site must be included. Access to site will be facilitated by the local Estates Team, and all site attendance must be coordinated through them. The inspections will take place during normal business hours 07.00 - 19.00. Public areas are to be inspected outside of museum operational hours of 10.00 - 18.00. To enable this, a program needs to be developed for the inspections at each site. There must be flexibility for events, breakdowns, maintenance etc within the program as an ... Additional information: You can view our tender documents and apply for the opportunity here: https://in-tendhost.co.uk/sciencemuseumgroup/aspx/Home Is a Recurrent Procurement Type? : No
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-b5fd17-ea8eb819-0e6d-4242-bd02-41a0180b9c4f
- Publication Source
- Contracts Finder
- Latest Notice
- https://www.contractsfinder.service.gov.uk/Notice/6f966914-5008-4b4d-8e5f-6c354ec160a4
- Current Stage
- Tender
- All Stages
- Tender
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Services
- Procurement Method
- Open
- Procurement Method Details
- Open procedure (below threshold)
- Tender Suitability
- SME
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
39 - Furniture (incl. office furniture), furnishings, domestic appliances (excl. lighting) and cleaning products
-
- CPV Codes
39151100 - Racking
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 27 Jun 20241 years ago
- Submission Deadline
- 5 Jul 2024Expired
- Future Notice Date
- Not specified
- Award Date
- Not specified
- Contract Period
- 1 Aug 2024 - 31 Jul 2027 2-3 years
- Recurrence
- Not specified
Notice Status
- Tender Status
- Active
- Lots Status
- Not Specified
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- SCIENCE MUSEUM GROUP
- Contact Name
- Orla Gardner
- Contact Email
- orla.gardner@railwaymuseum.org.uk
- Contact Phone
- 02079424000
Buyer Location
- Locality
- LONDON
- Postcode
- SW7 2DD
- Post Town
- South West London
- Country
- England
-
- Major Region (ITL 1)
- TLI London
- Basic Region (ITL 2)
- TLI3 Inner London - West
- Small Region (ITL 3)
- TLI33 Kensington & Chelsea and Hammersmith & Fulham
- Delivery Location
- Not specified
-
- Local Authority
- Kensington and Chelsea
- Electoral Ward
- Brompton & Hans Town
- Westminster Constituency
- Kensington and Bayswater
Further Information
Notice Documents
-
https://www.contractsfinder.service.gov.uk/Notice/6f966914-5008-4b4d-8e5f-6c354ec160a4
27th June 2024 - Opportunity notice on Contracts Finder -
https://in-tendhost.co.uk/sciencemuseumgroup/aspx/
Additional information on how to apply for this contract
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-b5fd17-ea8eb819-0e6d-4242-bd02-41a0180b9c4f-2024-06-27T17:03:43+01:00",
"date": "2024-06-27T17:03:43+01:00",
"ocid": "ocds-b5fd17-ea8eb819-0e6d-4242-bd02-41a0180b9c4f",
"language": "en",
"initiationType": "tender",
"tender": {
"id": "IT-492-1388-SCM3373M",
"title": "SMG Racking Inspections",
"description": "SMG wishes to appoint a supplier for inspection of racking and shelving. The company should be an approved SEMA (Storage Equipment Manufacturers Association) inspector or SARI. The inspections will be required at all the sites within SMG. The below definition explains what SMG considers to be racking: o Any type of framework of fixed or adjustable design which supports a load without the use of shelves (e.g., pallet racking) o Contains mechanical components/moving parts in the storage system (mechanical racking). o Stillages All other storage systems may be considered shelving or bookshelves. To ensure certain types of shelving are suitable for purpose, SMG have also deemed there to be a category of enhanced inspection shelving. This shelving is defined as: o Shelving which supports loads whereby one person could not comfortably lift the loads without assistance (based on manual handling guidelines) or the use of equipment such as ladders. o Extensive large shelving which supports a lot of material/stock The service should be on an annual basis unless the inspection results dictate otherwise. The appointed supplier will undertake a full asset verification during the first visit to each location, and throughout the contract, maintain an up-to-date asset list, adding and removing items as required. Access to the asset list, inspection reports, recommendations etc via a web portal/electronic system. The supplier should be independent from any racking manufacturer and be able to inspect all the types of racking as outlined above. The inspection should include all elements required under the relevant legislation, SEMA guidelines and best practices. In addition, identify if and where safe working load or SEMA notices are required, check existing signage for correct details and locations. Where the safe working load notices are missing, or the racking is historic in nature the safe load must be determined and notified to SMG. Where defects are noticed during the inspection the report must highlight this along with a time period for the repair. Any defects leading to serious safety risk should be notified to the local Estates Team immediately along with the required actions. Where defects are noted, a quote should follow to undertake the repairs. SMG will not be obliged to act on this quote. Some of the SMG sites are very large with asset locates across different buildings and numerous floors, the time and to travel within the site must be included. Access to site will be facilitated by the local Estates Team, and all site attendance must be coordinated through them. The inspections will take place during normal business hours 07.00 - 19.00. Public areas are to be inspected outside of museum operational hours of 10.00 - 18.00. To enable this, a program needs to be developed for the inspections at each site. There must be flexibility for events, breakdowns, maintenance etc within the program as an ... Additional information: You can view our tender documents and apply for the opportunity here: https://in-tendhost.co.uk/sciencemuseumgroup/aspx/Home Is a Recurrent Procurement Type? : No",
"datePublished": "2024-06-14T16:10:37+01:00",
"status": "active",
"classification": {
"scheme": "CPV",
"id": "39151100",
"description": "Racking"
},
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"postalCode": "SW7 2DD"
},
{
"countryName": "British Oversea Territories"
},
{
"countryName": "Channel Islands"
},
{
"countryName": "Europe"
},
{
"countryName": "Isle of Man"
},
{
"countryName": "Rest of the World"
},
{
"countryName": "United Kingdom"
},
{
"postalCode": "SW7 2DD"
},
{
"countryName": "British Oversea Territories"
},
{
"countryName": "Channel Islands"
},
{
"countryName": "Europe"
},
{
"countryName": "Isle of Man"
},
{
"countryName": "Rest of the World"
},
{
"countryName": "United Kingdom"
},
{
"postalCode": "SW7 2DD"
},
{
"countryName": "British Oversea Territories"
},
{
"countryName": "Channel Islands"
},
{
"countryName": "Europe"
},
{
"countryName": "Isle of Man"
},
{
"countryName": "Rest of the World"
},
{
"countryName": "United Kingdom"
},
{
"postalCode": "SW7 2DD"
},
{
"countryName": "British Oversea Territories"
},
{
"countryName": "Channel Islands"
},
{
"countryName": "Europe"
},
{
"countryName": "Isle of Man"
},
{
"countryName": "Rest of the World"
},
{
"countryName": "United Kingdom"
},
{
"postalCode": "SW7 2DD"
},
{
"countryName": "British Oversea Territories"
},
{
"countryName": "Channel Islands"
},
{
"countryName": "Europe"
},
{
"countryName": "Isle of Man"
},
{
"countryName": "Rest of the World"
},
{
"countryName": "United Kingdom"
}
]
}
],
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure (below threshold)",
"tenderPeriod": {
"endDate": "2024-07-05T17:00:00+01:00"
},
"contractPeriod": {
"startDate": "2024-08-01T01:00:00+01:00",
"endDate": "2027-07-31T23:59:59+01:00"
},
"suitability": {
"sme": true,
"vcse": false
},
"mainProcurementCategory": "services",
"documents": [
{
"id": "1",
"documentType": "tenderNotice",
"description": "Opportunity notice on Contracts Finder",
"url": "https://www.contractsfinder.service.gov.uk/Notice/6f966914-5008-4b4d-8e5f-6c354ec160a4",
"datePublished": "2024-06-14T16:10:37+01:00",
"format": "text/html",
"language": "en",
"dateModified": "2024-06-27T17:03:43+01:00"
},
{
"id": "2",
"description": "Additional information on how to apply for this contract",
"url": "https://in-tendhost.co.uk/sciencemuseumgroup/aspx/"
}
]
},
"parties": [
{
"id": "GB-CFS-165817",
"name": "Science Museum Group",
"identifier": {
"legalName": "Science Museum Group"
},
"address": {
"streetAddress": "Exhibition Road, South Kensington",
"locality": "London",
"postalCode": "SW7 2DD",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Orla Gardner",
"email": "Orla.Gardner@Railwaymuseum.org.uk",
"telephone": "02079424000"
},
"details": {
"url": "https://www.sciencemuseumgroup.org.uk"
},
"roles": [
"buyer"
]
}
],
"buyer": {
"id": "GB-CFS-165817",
"name": "Science Museum Group"
}
}