Notice Information
Notice Title
The design and manufacture of a suite of tools for aircraft wing manufacture
Notice Description
A suite of tools to enable the manufacture of a complete set of wing covers Port, Starboard, Upper & Lower. The wing covers will be manufactured from Aerospace pre-preg composite materials which will be cured in the National Composites Centre large autoclave. Each of the cover assemblies will consist of a cover panel as well as integral stringers. The tools in scope for this project will include all mold tools as well as all lifting and handling provision to enable the manufacture of all constituent parts and the integration of these parts into their respective assemblies. The rough sizing for each of the individual wing covers will be approximately 6m span, 1.4m chord with a typical aero surface. The program for works is estimated to be in the order of 7 months, with initial geometry data drop in November 2021 and final geometry January 2022 with tools required on dock at the NCC at the end of May 2022.
Lot Information
Lot 1
A suite of tools to enable the manufacture of a complete set of wing covers Port, Starboard, Upper & Lower. The wing covers will be manufactured from Aerospace pre-preg composite materials which will be cured in the National Composites Centre large autoclave. Each of the cover assemblies will consist of a cover panel as well as integral stringers. The tools in scope for this project will include all mold tools as well as all lifting and handling provision to enable the manufacture of all constituent parts and the integration of these parts into their respective assemblies. The rough sizing for each of the individual wing covers will be approximately 6m span, 1.4m chord with a typical aero surface. The program for works is estimated to be in the order of 7 months, with initial geometry data drop in November 2021 and final geometry January 2022 with tools required on dock at the NCC at the end of May 2022.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-02e2d8
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/032359-2021
- Current Stage
- Award
- All Stages
- Tender, Award
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- SME
Common Procurement Vocabulary (CPV)
- CPV Divisions
42 - Industrial machinery
-
- CPV Codes
42900000 - Miscellaneous general and special-purpose machinery
Notice Value(s)
- Tender Value
- £1,000,000 £1M-£10M
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £1,439,200 £1M-£10M
Notice Dates
- Publication Date
- 24 Dec 20214 years ago
- Submission Deadline
- 19 Oct 2021Expired
- Future Notice Date
- Not specified
- Award Date
- 22 Dec 20214 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Cancelled
- Awards Status
- Active
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNIVERSITY OF BRISTOL - NATIONAL COMPOSITES CENTRE
- Additional Buyers
- Contact Name
- Catherine Summers, Zoe Sotan
- Contact Email
- catherine.summers@nccuk.com, zoe.sotan@nccuk.com
- Contact Phone
- +44 01179289000, +44 1173707600
Buyer Location
- Locality
- BRISTOL
- Postcode
- BS16 7FS
- Post Town
- Bristol
- Country
- England
-
- Major Region (ITL 1)
- TLK South West (England)
- Basic Region (ITL 2)
- TLK5 West of England
- Small Region (ITL 3)
- TLK52 Bath & North East Somerset and South Gloucestershire
- Delivery Location
- Not specified
-
- Local Authority
- South Gloucestershire
- Electoral Ward
- Emersons Green
- Westminster Constituency
- Filton and Bradley Stoke
Further Information
Notice URLs
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-02e2d8-2021-12-24T22:44:03Z",
"date": "2021-12-24T22:44:03Z",
"ocid": "ocds-h6vhtk-02e2d8",
"initiationType": "tender",
"tender": {
"id": "ocds-h6vhtk-02e2d8",
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
},
"title": "The design and manufacture of a suite of tools for aircraft wing manufacture",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "42900000",
"description": "Miscellaneous general and special-purpose machinery"
},
"mainProcurementCategory": "goods",
"description": "A suite of tools to enable the manufacture of a complete set of wing covers Port, Starboard, Upper & Lower. The wing covers will be manufactured from Aerospace pre-preg composite materials which will be cured in the National Composites Centre large autoclave. Each of the cover assemblies will consist of a cover panel as well as integral stringers. The tools in scope for this project will include all mold tools as well as all lifting and handling provision to enable the manufacture of all constituent parts and the integration of these parts into their respective assemblies. The rough sizing for each of the individual wing covers will be approximately 6m span, 1.4m chord with a typical aero surface. The program for works is estimated to be in the order of 7 months, with initial geometry data drop in November 2021 and final geometry January 2022 with tools required on dock at the NCC at the end of May 2022.",
"value": {
"amount": 1000000,
"currency": "GBP"
},
"lots": [
{
"id": "1",
"description": "A suite of tools to enable the manufacture of a complete set of wing covers Port, Starboard, Upper & Lower. The wing covers will be manufactured from Aerospace pre-preg composite materials which will be cured in the National Composites Centre large autoclave. Each of the cover assemblies will consist of a cover panel as well as integral stringers. The tools in scope for this project will include all mold tools as well as all lifting and handling provision to enable the manufacture of all constituent parts and the integration of these parts into their respective assemblies. The rough sizing for each of the individual wing covers will be approximately 6m span, 1.4m chord with a typical aero surface. The program for works is estimated to be in the order of 7 months, with initial geometry data drop in November 2021 and final geometry January 2022 with tools required on dock at the NCC at the end of May 2022.",
"contractPeriod": {
"endDate": "2023-12-31T23:59:59Z"
},
"hasRenewal": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"hasOptions": false,
"status": "cancelled",
"awardCriteria": {
"criteria": [
{
"name": "Technical ability",
"type": "quality",
"description": "70"
},
{
"name": "Project management",
"type": "quality",
"description": "33"
},
{
"name": "Statement of requirement",
"type": "quality",
"description": "67"
},
{
"type": "price",
"description": "30"
}
]
}
}
],
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"region": "UK"
},
{
"region": "UK"
}
],
"relatedLot": "1"
}
],
"participationFees": [
{
"id": "1",
"type": [
"document"
]
}
],
"submissionMethod": [
"electronicSubmission",
"written"
],
"submissionMethodDetails": "https://tenders.bris.ac.uk",
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure",
"coveredBy": [
"GPA"
],
"tenderPeriod": {
"endDate": "2021-10-19T12:00:00+01:00"
},
"submissionTerms": {
"languages": [
"en"
]
},
"awardPeriod": {
"startDate": "2021-10-19T12:00:00+01:00"
},
"bidOpening": {
"date": "2021-10-19T12:00:00+01:00"
},
"hasRecurrence": false
},
"parties": [
{
"id": "GB-FTS-29118",
"name": "University of Bristol",
"identifier": {
"legalName": "University of Bristol"
},
"address": {
"streetAddress": "Bristol & Bath Science Park, Emersons Green, BS16 7FS",
"locality": "Bristol",
"region": "UK",
"postalCode": "BS16 7FS",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Catherine Summers",
"telephone": "+44 1173707600",
"email": "Catherine.Summers@nccuk.com",
"url": "http://www.nccuk.com"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.nccuk.com",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "BODY_PUBLIC",
"description": "Body governed by public law"
},
{
"scheme": "COFOG",
"id": "09",
"description": "Education"
}
]
}
},
{
"id": "GB-FTS-29119",
"name": "University of Bristol",
"identifier": {
"legalName": "University of Bristol"
},
"address": {
"streetAddress": "Bristol & Bath Science Park, Emersons Green,",
"locality": "Bristol",
"postalCode": "BS16 7FS",
"countryName": "United Kingdom"
},
"roles": [
"reviewBody",
"mediationBody",
"reviewContactPoint"
],
"additionalContactPoints": [
{
"email": "catherine.summers@nccuk.com"
}
]
},
{
"id": "GB-FTS-39257",
"name": "University of Bristol - National composites Centre",
"identifier": {
"legalName": "University of Bristol - National composites Centre"
},
"address": {
"streetAddress": "National composites Centre, Bristol and Bath Science Park, Feynman Way Central, Emersons Green",
"locality": "Bristol",
"region": "UK",
"postalCode": "BS16 7FS",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Zoe Sotan",
"telephone": "+44 01179289000",
"email": "zoe.sotan@nccuk.com"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.nccuk.com",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "BODY_PUBLIC",
"description": "Body governed by public law"
},
{
"scheme": "COFOG",
"id": "09",
"description": "Education"
}
]
}
},
{
"id": "GB-FTS-39258",
"name": "Datum Tool Design",
"identifier": {
"legalName": "Datum Tool Design"
},
"address": {
"locality": "Ballynahinch, Down",
"region": "UK",
"postalCode": "BT24 8AW",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
},
{
"id": "GB-FTS-39259",
"name": "University of Bristol - National Composites Centre",
"identifier": {
"legalName": "University of Bristol - National Composites Centre"
},
"address": {
"streetAddress": "Bristol and Bath Science Park",
"locality": "Bristol",
"postalCode": "BS16 7FS",
"countryName": "United Kingdom"
},
"contactPoint": {
"email": "zoe.sotan@nccuk.com"
},
"roles": [
"reviewBody"
]
}
],
"buyer": {
"id": "GB-FTS-39257",
"name": "University of Bristol - National composites Centre"
},
"language": "en",
"awards": [
{
"id": "032359-2021-1",
"relatedLots": [
"1"
],
"status": "active",
"suppliers": [
{
"id": "GB-FTS-39258",
"name": "Datum Tool Design"
}
]
}
],
"contracts": [
{
"id": "032359-2021-1",
"awardID": "032359-2021-1",
"status": "active",
"value": {
"amount": 1439200,
"currency": "GBP"
},
"dateSigned": "2021-12-22T00:00:00Z"
}
],
"bids": {
"statistics": [
{
"id": "1",
"measure": "bids",
"relatedLot": "1",
"value": 4
}
]
}
}