Notice Information
Notice Title
PRO003780-Services-Framework-Construction Independent Assurance and Testing
Notice Description
The purpose of this PIN is to assess the number of suitable suppliers who would be interested in tendering for the provision of Construction Independent Assurance and Testing Services. The Construction Independent Assurance and Testing framework is required to support in the audit and testing of reinstatement products on site premises, to advise suitability of materials and products, as well as condition testing on pipes and liners. The is also a requirement to carry out assessment and audit of steel, concrete and other materials completed by others on construction sites and in manufacturer's premises to ensure compliance to relative standards.
Lot Information
Lot 1
The scope of this agreement will be subject but not limited to the following requirements: Testing and Assurance of Pipe Joints * Testing and Inspection of welds and joints * On site, within laboratory conditions, in workshops and remotely * Butt Fusion, Electrofusion and Mechanical Joints Pipeline Materials * Testing, assessment and analysis of pipes * On site, within laboratory conditions, in workshops and remotely * Materials include but are not limited to; Ductile iron, Cast Iron, Steel, Polyethylene Structural Steelworks * Testing, assessment and analysis of steelwork structures * On site, within laboratory conditions, in workshops and remotely * The services required are as followed but are not limited to; Ultrasonic Testing, Condition Assessment, Audit of 3rd party testing Coatings * Testing, assessment and analysis of various pipeline and pump coatings * On site, within laboratory conditions, in workshops and remotely * Audit of 3rd party testing Structural and Non-Structural Liners * Testing, assessment and analysis of various pipeline linings * Testing, assessment and analysis of various sewer pipeline linings (i.e. Cured in Place) * On site, within laboratory conditions, in workshops and remotely * Audit of 3rd party testing and witnessing of samples being collected Concrete Testing * Testing, assessment and analysis of cured concrete * On site, within laboratory conditions, in workshops and remotely * The services required are as followed but are not limited to; QC (Unbound Materials), QC (Particle Size Distribution), Cores and Petrography, Carbonisation Testing, Chlorination Testing, Half-Cell Pot Resistivity, Re-bar Detection, Audit of 3rd party testing Pressure Testing * Test Supervision and Data Analysis * Carry out Pressure Test, Analysis of Pressure Test, Audit of 3rd party testing * Capability to download pressure test data from site and remotely Street works Testing and Assurance * On site, within laboratory conditions, in workshops. Additional information: **Response deadline 18th November 2021** **Please see attached Supplier Competency Matrix**
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-02f196
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/027176-2021
- Current Stage
- Planning
- All Stages
- Planning
Procurement Classification
- Notice Type
- Planning Notice
- Procurement Type
- Standard
- Procurement Category
- Services
- Procurement Method
- Not Specified
- Procurement Method Details
- Not specified
- Tender Suitability
- Not specified
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
38 - Laboratory, optical and precision equipments (excl. glasses)
71 - Architectural, construction, engineering and inspection services
76 - Services related to the oil and gas industry
-
- CPV Codes
38500000 - Checking and testing apparatus
71000000 - Architectural, construction, engineering and inspection services
71610000 - Composition and purity testing and analysis services
71630000 - Technical inspection and testing services
71631400 - Technical inspection services of engineering structures
71632200 - Non-destructive testing services
76600000 - Pipeline-inspection services
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 29 Oct 20214 years ago
- Submission Deadline
- Not specified
- Future Notice Date
- 3 Jan 2022Expired
- Award Date
- Not specified
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Planned
- Lots Status
- Planned
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNITED UTILITIES WATER LIMITED
- Contact Name
- Adam Almond
- Contact Email
- adam.almond@uuplc.co.uk
- Contact Phone
- +44 1925678021
Buyer Location
- Locality
- WARRINGTON
- Postcode
- WA5 3LP
- Post Town
- Warrington
- Country
- England
-
- Major Region (ITL 1)
- TLD North West (England)
- Basic Region (ITL 2)
- TLD6 Cheshire
- Small Region (ITL 3)
- TLD61 Warrington
- Delivery Location
- TLD North West (England)
-
- Local Authority
- Warrington
- Electoral Ward
- Great Sankey North and Whittle Hall
- Westminster Constituency
- Warrington South
Further Information
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-02f196-2021-10-29T12:10:23+01:00",
"date": "2021-10-29T12:10:23+01:00",
"ocid": "ocds-h6vhtk-02f196",
"description": "Included with this PIN is a Supplier Competency Matrix. Please complete this matrix as per the instructions included towards the bottom of the spreadsheet. *Note the instructions on the Supplier Competency Matrix regarding the drop down selection box in column I. \"Competent in some areas should only be completed if you are capable of delivering 80% of the activities within Appendix A. The remaining 20% will need to be subcontracted. If you are unable to meet this requirement then please choose the drop down option \"Not Competent\". If you have experience in this area, could you please return the completed competency matrix via email to RegulatoryProcurementTeam@uuplc.co.uk Within the body of the email please provide the following: * Company Name * Contact details, including location telephone and e-mail address, main point of contact and position in Company",
"initiationType": "tender",
"tender": {
"id": "PRO003780",
"legalBasis": {
"id": "32014L0025",
"scheme": "CELEX"
},
"title": "PRO003780-Services-Framework-Construction Independent Assurance and Testing",
"status": "planned",
"classification": {
"scheme": "CPV",
"id": "71630000",
"description": "Technical inspection and testing services"
},
"mainProcurementCategory": "services",
"description": "The purpose of this PIN is to assess the number of suitable suppliers who would be interested in tendering for the provision of Construction Independent Assurance and Testing Services. The Construction Independent Assurance and Testing framework is required to support in the audit and testing of reinstatement products on site premises, to advise suitability of materials and products, as well as condition testing on pipes and liners. The is also a requirement to carry out assessment and audit of steel, concrete and other materials completed by others on construction sites and in manufacturer's premises to ensure compliance to relative standards.",
"lots": [
{
"id": "1",
"description": "The scope of this agreement will be subject but not limited to the following requirements: Testing and Assurance of Pipe Joints * Testing and Inspection of welds and joints * On site, within laboratory conditions, in workshops and remotely * Butt Fusion, Electrofusion and Mechanical Joints Pipeline Materials * Testing, assessment and analysis of pipes * On site, within laboratory conditions, in workshops and remotely * Materials include but are not limited to; Ductile iron, Cast Iron, Steel, Polyethylene Structural Steelworks * Testing, assessment and analysis of steelwork structures * On site, within laboratory conditions, in workshops and remotely * The services required are as followed but are not limited to; Ultrasonic Testing, Condition Assessment, Audit of 3rd party testing Coatings * Testing, assessment and analysis of various pipeline and pump coatings * On site, within laboratory conditions, in workshops and remotely * Audit of 3rd party testing Structural and Non-Structural Liners * Testing, assessment and analysis of various pipeline linings * Testing, assessment and analysis of various sewer pipeline linings (i.e. Cured in Place) * On site, within laboratory conditions, in workshops and remotely * Audit of 3rd party testing and witnessing of samples being collected Concrete Testing * Testing, assessment and analysis of cured concrete * On site, within laboratory conditions, in workshops and remotely * The services required are as followed but are not limited to; QC (Unbound Materials), QC (Particle Size Distribution), Cores and Petrography, Carbonisation Testing, Chlorination Testing, Half-Cell Pot Resistivity, Re-bar Detection, Audit of 3rd party testing Pressure Testing * Test Supervision and Data Analysis * Carry out Pressure Test, Analysis of Pressure Test, Audit of 3rd party testing * Capability to download pressure test data from site and remotely Street works Testing and Assurance * On site, within laboratory conditions, in workshops. Additional information: **Response deadline 18th November 2021** **Please see attached Supplier Competency Matrix**",
"status": "planned"
}
],
"items": [
{
"id": "1",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "38500000",
"description": "Checking and testing apparatus"
},
{
"scheme": "CPV",
"id": "71000000",
"description": "Architectural, construction, engineering and inspection services"
},
{
"scheme": "CPV",
"id": "71610000",
"description": "Composition and purity testing and analysis services"
},
{
"scheme": "CPV",
"id": "71631400",
"description": "Technical inspection services of engineering structures"
},
{
"scheme": "CPV",
"id": "71632200",
"description": "Non-destructive testing services"
},
{
"scheme": "CPV",
"id": "76600000",
"description": "Pipeline-inspection services"
}
],
"deliveryAddresses": [
{
"region": "UKD"
}
],
"relatedLot": "1"
}
],
"communication": {
"futureNoticeDate": "2022-01-03T00:00:00Z"
}
},
"parties": [
{
"id": "GB-FTS-4736",
"name": "United Utilities Water Limited",
"identifier": {
"legalName": "United Utilities Water Limited",
"id": "02366678"
},
"address": {
"streetAddress": "Lingley Mere Business Park",
"locality": "Warrington",
"region": "UKD",
"postalCode": "WA5 3LP",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Adam Almond",
"telephone": "+44 1925678021",
"email": "Adam.Almond@uuplc.co.uk"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.unitedutilities.com",
"buyerProfile": "https://uk.eu-supply.com/ctm/Company/CompanyInformation/Index/43984",
"classifications": [
{
"scheme": "TED_CE_ACTIVITY",
"id": "WATER",
"description": "Water"
}
]
}
}
],
"buyer": {
"id": "GB-FTS-4736",
"name": "United Utilities Water Limited"
},
"language": "en"
}