Notice Information
Notice Title
The Supply, Delivery and Installation of a Flat Strip Draw Tester (sdt)
Notice Description
The National Manufacturing Institute of Scotland (NMIS) seeks a suitably qualified supplier to supply, deliver, install and commission a Flat Strip Draw Tester (SDT) for the purpose of investigating the tribology of sheet metal forming (SMF) processes. At present NMIS are willing to consider a range of designs to meet the specification ( for example, designs may take the form of double die and single die configurations). Given the above, NMIS requires the offered SDT solution to be equipped with the capabilities to simulate these. The capabilities of the offered solution shall include but not be limited to: Draw speeds within the range <= 10 and > 100 mm s-1 (preferably >= 200 mm s-1) Nominal contact pressures within the range <= 5 and >= 30 MPa Integrated specimen heating capabilities capable of >= 950 degC It is desirable that specimen heating capabilities enable controllable heating rates, with a minimum of <=14 degC s-1 Integrated method by which to measure the pre-draw specimen temperature Integrated tool heating capabilities capable of >= 100 degC Integrated tool cooling system to simulate e.g. operations that involve die quenching Tools should be conducive to in-house manufacture and from a range of materials i.e. plug-and-play friendly.
Lot Information
Lot 1
Potential tenderers who believe they can fulfill the above noted requirement are asked to note their interest against this notice by 12:00 noon 6th July 2022.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-034d40
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/018073-2022
- Current Stage
- Planning
- All Stages
- Planning
Procurement Classification
- Notice Type
- Planning Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Not Specified
- Procurement Method Details
- Not specified
- Tender Suitability
- Not specified
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
42 - Industrial machinery
51 - Installation services (except software)
-
- CPV Codes
42000000 - Industrial machinery
42900000 - Miscellaneous general and special-purpose machinery
51430000 - Installation services of laboratory equipment
Notice Value(s)
- Tender Value
- £200,000 £100K-£500K
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 1 Jul 20223 years ago
- Submission Deadline
- Not specified
- Future Notice Date
- 14 Jul 2022Expired
- Award Date
- Not specified
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Planned
- Lots Status
- Planned
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNIVERSITY OF STRATHCLYDE
- Contact Name
- Natasha Murray
- Contact Email
- natasha.murray@strath.ac.uk
- Contact Phone
- +44 1415484451
Buyer Location
- Locality
- GLASGOW
- Postcode
- G1 1QE
- Post Town
- Glasgow
- Country
- Scotland
-
- Major Region (ITL 1)
- TLM Scotland
- Basic Region (ITL 2)
- TLM3 West Central Scotland
- Small Region (ITL 3)
- TLM32 Glasgow City
- Delivery Location
- TLM82 Glasgow City
-
- Local Authority
- Glasgow City
- Electoral Ward
- Anderston/City/Yorkhill
- Westminster Constituency
- Glasgow North East
Further Information
Notice URLs
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-034d40-2022-07-01T16:19:27+01:00",
"date": "2022-07-01T16:19:27+01:00",
"ocid": "ocds-h6vhtk-034d40",
"description": "NOTE: To register your interest in this notice and obtain any additional information please visit the Public Contracts Scotland Web Site at https://www.publiccontractsscotland.gov.uk/Search/Search_Switch.aspx?ID=698483. (SC Ref:698483)",
"initiationType": "tender",
"tender": {
"id": "UOS-24426-2022",
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
},
"title": "The Supply, Delivery and Installation of a Flat Strip Draw Tester (sdt)",
"status": "planned",
"classification": {
"scheme": "CPV",
"id": "42000000",
"description": "Industrial machinery"
},
"mainProcurementCategory": "goods",
"description": "The National Manufacturing Institute of Scotland (NMIS) seeks a suitably qualified supplier to supply, deliver, install and commission a Flat Strip Draw Tester (SDT) for the purpose of investigating the tribology of sheet metal forming (SMF) processes. At present NMIS are willing to consider a range of designs to meet the specification ( for example, designs may take the form of double die and single die configurations). Given the above, NMIS requires the offered SDT solution to be equipped with the capabilities to simulate these. The capabilities of the offered solution shall include but not be limited to: Draw speeds within the range <= 10 and > 100 mm s-1 (preferably >= 200 mm s-1) Nominal contact pressures within the range <= 5 and >= 30 MPa Integrated specimen heating capabilities capable of >= 950 degC It is desirable that specimen heating capabilities enable controllable heating rates, with a minimum of <=14 degC s-1 Integrated method by which to measure the pre-draw specimen temperature Integrated tool heating capabilities capable of >= 100 degC Integrated tool cooling system to simulate e.g. operations that involve die quenching Tools should be conducive to in-house manufacture and from a range of materials i.e. plug-and-play friendly.",
"value": {
"amount": 200000,
"currency": "GBP"
},
"lots": [
{
"id": "1",
"description": "Potential tenderers who believe they can fulfill the above noted requirement are asked to note their interest against this notice by 12:00 noon 6th July 2022.",
"status": "planned"
}
],
"items": [
{
"id": "1",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "42900000",
"description": "Miscellaneous general and special-purpose machinery"
},
{
"scheme": "CPV",
"id": "51430000",
"description": "Installation services of laboratory equipment"
}
],
"deliveryAddresses": [
{
"region": "UKM82"
}
],
"deliveryLocation": {
"description": "National Manufacturing Institute of Scotland"
},
"relatedLot": "1"
}
],
"communication": {
"futureNoticeDate": "2022-07-15T00:00:00+01:00",
"atypicalToolUrl": "http://www.publiccontractsscotland.gov.uk"
},
"coveredBy": [
"GPA"
]
},
"parties": [
{
"id": "GB-FTS-218",
"name": "University of Strathclyde",
"identifier": {
"legalName": "University of Strathclyde"
},
"address": {
"streetAddress": "40 George Street, Procurement Department",
"locality": "Glasgow",
"region": "UKM82",
"postalCode": "G1 1QE",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Natasha Murray",
"telephone": "+44 1415484451",
"email": "natasha.murray@strath.ac.uk"
},
"roles": [
"buyer",
"centralPurchasingBody"
],
"details": {
"url": "http://www.strath.ac.uk/",
"buyerProfile": "https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00113",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "BODY_PUBLIC",
"description": "Body governed by public law"
},
{
"scheme": "COFOG",
"id": "09",
"description": "Education"
}
]
}
}
],
"buyer": {
"id": "GB-FTS-218",
"name": "University of Strathclyde"
},
"links": [
{
"rel": "canonical",
"href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000698483"
}
],
"language": "en"
}