Notice Information
Notice Title
Design, supply and fit of museum showcases for The Harris Museum - Harris Your Place Project
Notice Description
Design, supply and fit of museum showcases for The Harris Museum - Harris Your Place Project The tender documentation provides a full description of the works to be undertaken, but generally the showcases for the new Harris Museum galleries are grouped into two main categories: 'Type 1' (Standard Showcase) & 'Type 2' (Conservation-Grade Showcase). Type 1 Standard showcases must be sufficiently well sealed to provide some environmental stability and protect objects from dust, coarse particulate pollutants, insect/pest attack and from handling damage or theft. Cases must be lockable - security screws are acceptable. Locks should be concealed from view, but easily accessible for maintenance. Type 2 Conservation grade showcases must have 0.1 air change rate or less per day. BSRIA test certificates will be required on certain cases selected by The Harris Museum's conservators after installation. Internal facility for inclusion of buffering agents, desiccants or pollution absorbents, with a means of diffusion between the tray and the display volume. Perimeter gap of no less than 20 mm required around internal base panel of each case, to facilitate diffusion. The Harris Museum's conservators to approve number and layout of Artsorb / Prosorb cassettes that need to be accommodated in each internal facility. Provision must be made for environmental monitoring equipment placed inside the display space. Cases should be secured with a minimum of 2 Abloy locks with separate keys. Locks should be concealed from view, but easily accessible for maintenance. Facility for fitting contact alarms is to be integral to the case structure without compromising the seals and air exchange rate. Cases should be designed for a lifespan of 15 years
Lot Information
Lot 1
Design, supply and fit of museum showcases for The Harris Museum - Harris Your Place Project The tender documentation provides a full description of the works to be undertaken, but generally the showcases for the new Harris Museum galleries are grouped into two main categories: 'Type 1' (Standard Showcase) & 'Type 2' (Conservation-Grade Showcase). Type 1 Standard showcases must be sufficiently well sealed to provide some environmental stability and protect objects from dust, coarse particulate pollutants, insect/pest attack and from handling damage or theft. Cases must be lockable - security screws are acceptable. Locks should be concealed from view, but easily accessible for maintenance. Type 2 Conservation grade showcases must have 0.1 air change rate or less per day. BSRIA test certificates will be required on certain cases selected by The Harris Museum's conservators after installation. Internal facility for inclusion of buffering agents, desiccants or pollution absorbents, with a means of diffusion between the tray and the display volume. Perimeter gap of no less than 20 mm required around internal base panel of each case, to facilitate diffusion. The Harris Museum's conservators to approve number and layout of Artsorb / Prosorb cassettes that need to be accommodated in each internal facility. Provision must be made for environmental monitoring equipment placed inside the display space. Cases should be secured with a minimum of 2 Abloy locks with separate keys. Locks should be concealed from view, but easily accessible for maintenance. Facility for fitting contact alarms is to be integral to the case structure without compromising the seals and air exchange rate. Cases should be designed for a lifespan of 15 years
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-035f35
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/022705-2022
- Current Stage
- Tender
- All Stages
- Tender
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Services
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
92 - Recreational, cultural and sporting services
-
- CPV Codes
92521100 - Museum-exhibition services
Notice Value(s)
- Tender Value
- £700,000 £500K-£1M
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 16 Aug 20223 years ago
- Submission Deadline
- 26 Sep 2022Expired
- Future Notice Date
- Not specified
- Award Date
- Not specified
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Active
- Lots Status
- Active
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- PRESTON CITY COUNCIL
- Contact Name
- Mr Steven Fletcher
- Contact Email
- steven.fletcher@focus-consultants.com
- Contact Phone
- Not specified
Buyer Location
- Locality
- PRESTON
- Postcode
- PR1 2RL
- Post Town
- Preston
- Country
- England
-
- Major Region (ITL 1)
- TLD North West (England)
- Basic Region (ITL 2)
- TLD4 Lancashire
- Small Region (ITL 3)
- TLD45 Mid Lancashire
- Delivery Location
- TLD45 Mid Lancashire
-
- Local Authority
- Preston
- Electoral Ward
- City Centre
- Westminster Constituency
- Preston
Further Information
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-035f35-2022-08-16T17:54:54+01:00",
"date": "2022-08-16T17:54:54+01:00",
"ocid": "ocds-h6vhtk-035f35",
"initiationType": "tender",
"tender": {
"id": "DN628524",
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
},
"title": "Design, supply and fit of museum showcases for The Harris Museum - Harris Your Place Project",
"status": "active",
"classification": {
"scheme": "CPV",
"id": "92521100",
"description": "Museum-exhibition services"
},
"mainProcurementCategory": "services",
"description": "Design, supply and fit of museum showcases for The Harris Museum - Harris Your Place Project The tender documentation provides a full description of the works to be undertaken, but generally the showcases for the new Harris Museum galleries are grouped into two main categories: 'Type 1' (Standard Showcase) & 'Type 2' (Conservation-Grade Showcase). Type 1 Standard showcases must be sufficiently well sealed to provide some environmental stability and protect objects from dust, coarse particulate pollutants, insect/pest attack and from handling damage or theft. Cases must be lockable - security screws are acceptable. Locks should be concealed from view, but easily accessible for maintenance. Type 2 Conservation grade showcases must have 0.1 air change rate or less per day. BSRIA test certificates will be required on certain cases selected by The Harris Museum's conservators after installation. Internal facility for inclusion of buffering agents, desiccants or pollution absorbents, with a means of diffusion between the tray and the display volume. Perimeter gap of no less than 20 mm required around internal base panel of each case, to facilitate diffusion. The Harris Museum's conservators to approve number and layout of Artsorb / Prosorb cassettes that need to be accommodated in each internal facility. Provision must be made for environmental monitoring equipment placed inside the display space. Cases should be secured with a minimum of 2 Abloy locks with separate keys. Locks should be concealed from view, but easily accessible for maintenance. Facility for fitting contact alarms is to be integral to the case structure without compromising the seals and air exchange rate. Cases should be designed for a lifespan of 15 years",
"value": {
"amount": 700000,
"currency": "GBP"
},
"lots": [
{
"id": "1",
"description": "Design, supply and fit of museum showcases for The Harris Museum - Harris Your Place Project The tender documentation provides a full description of the works to be undertaken, but generally the showcases for the new Harris Museum galleries are grouped into two main categories: 'Type 1' (Standard Showcase) & 'Type 2' (Conservation-Grade Showcase). Type 1 Standard showcases must be sufficiently well sealed to provide some environmental stability and protect objects from dust, coarse particulate pollutants, insect/pest attack and from handling damage or theft. Cases must be lockable - security screws are acceptable. Locks should be concealed from view, but easily accessible for maintenance. Type 2 Conservation grade showcases must have 0.1 air change rate or less per day. BSRIA test certificates will be required on certain cases selected by The Harris Museum's conservators after installation. Internal facility for inclusion of buffering agents, desiccants or pollution absorbents, with a means of diffusion between the tray and the display volume. Perimeter gap of no less than 20 mm required around internal base panel of each case, to facilitate diffusion. The Harris Museum's conservators to approve number and layout of Artsorb / Prosorb cassettes that need to be accommodated in each internal facility. Provision must be made for environmental monitoring equipment placed inside the display space. Cases should be secured with a minimum of 2 Abloy locks with separate keys. Locks should be concealed from view, but easily accessible for maintenance. Facility for fitting contact alarms is to be integral to the case structure without compromising the seals and air exchange rate. Cases should be designed for a lifespan of 15 years",
"contractPeriod": {
"endDate": "2023-12-31T23:59:59Z"
},
"hasRenewal": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"hasOptions": false,
"status": "active"
}
],
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"region": "UKD45"
}
],
"relatedLot": "1"
}
],
"submissionMethod": [
"electronicSubmission"
],
"submissionMethodDetails": "https://procontract.due-north.com/",
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure",
"coveredBy": [
"GPA"
],
"tenderPeriod": {
"endDate": "2022-09-26T17:00:00+01:00"
},
"submissionTerms": {
"languages": [
"en"
]
},
"awardPeriod": {
"startDate": "2022-09-26T17:05:00+01:00"
},
"bidOpening": {
"date": "2022-09-26T17:05:00+01:00"
},
"hasRecurrence": false
},
"parties": [
{
"id": "GB-FTS-22282",
"name": "Preston City Council",
"identifier": {
"legalName": "Preston City Council"
},
"address": {
"streetAddress": "Preston City Council, Town Hall Lancaster Road",
"locality": "Preston",
"region": "UKD45",
"postalCode": "PR1 2RL",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Mr Steven Fletcher",
"email": "steven.fletcher@focus-consultants.com",
"url": "https://procontract.due-north.com/"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.preston.gov.uk/",
"buyerProfile": "http://www.preston.gov.uk/",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "REGIONAL_AUTHORITY",
"description": "Regional or local authority"
},
{
"scheme": "COFOG",
"id": "01",
"description": "General public services"
}
]
}
},
{
"id": "GB-FTS-61561",
"name": "Preston City Council",
"identifier": {
"legalName": "Preston City Council"
},
"address": {
"locality": "PRESTON",
"postalCode": "PR1 2RL",
"countryName": "United Kingdom"
},
"roles": [
"reviewBody"
]
}
],
"buyer": {
"id": "GB-FTS-22282",
"name": "Preston City Council"
},
"language": "en"
}