Notice Information
Notice Title
8041768 - Supply of an X-ray Diffractometer
Notice Description
Located on the Harwell Science and Innovation Campus in Oxfordshire, Diamond is a leadingedge facility for science, engineering and innovation. It is the largest science facility to be built in the UK for 40 years and produces ultra-violet, infra-red and X-ray beams of exceptional brightness. The scope is to deliver, install and commission a versatile x-ray system based on an x-ray source, optics, diffractometer and detector. The system will be located at a permanent fixed position on the floor of the Optics Fabrication Building Lab. 5. The instrument will be mainly dedicated for reflectivity measurements to characterise testing of multilayer optical elements for the Multilayer Deposition System. The optical elements to be tested are mirrors, thin films and multilayers. These will be either free standing or mounted on holders. Therefore, a large range of sample weights and sizes should be possible to be installed on the diffractometer. It is envisaged that the instrument will be used for measuring high resolution reflectivity. Mirror and multilayer measurements will be done at grazing incidence angle. The diffractometer will have to accommodate samples weighing up to 1 kg with dimensions up to 100mm (Length)x50mm (Width)x50 mm (Height)., appropriate stage motion to perform measurements at different positions on (to map) the sample. It is expected that the versatile x-ray diffractometer will be based on: a high intensity x-ray tube with a copper target; interchangeable, high energy and angle resolution x-ray optical modules for pre- and post-processing the x-ray beam; 4 circle diffractometer with sample stage allowing X, Y, Z translations, sample rotation and tilt adjustment perpendicular to the incident beam. The optics modules will be chosen according to required beam intensity, collimation, resolution and size.
Lot Information
Lot 1
Located on the Harwell Science and Innovation Campus in Oxfordshire, Diamond is a leadingedge facility for science, engineering and innovation. It is the largest science facility to be built in the UK for 40 years and produces ultra-violet, infra-red and X-ray beams of exceptional brightness. The scope is to deliver, install and commission a versatile x-ray system based on an x-ray source, optics, diffractometer and detector. The system will be located at a permanent fixed position on the floor of the Optics Fabrication Building Lab. 5. The instrument will be mainly dedicated for reflectivity measurements to characterise testing of multilayer optical elements for the Multilayer Deposition System. The optical elements to be tested are mirrors, thin films and multilayers. These will be either free standing or mounted on holders. Therefore, a large range of sample weights and sizes should be possible to be installed on the diffractometer. It is envisaged that the instrument will be used for measuring high resolution reflectivity. Mirror and multilayer measurements will be done at grazing incidence angle. The diffractometer will have to accommodate samples weighing up to 1 kg with dimensions up to 100mm (Length)x50mm (Width)x50 mm (Height)., appropriate stage motion to perform measurements at different positions on (to map) the sample. It is expected that the versatile x-ray diffractometer will be based on: a high intensity x-ray tube with a copper target; interchangeable, high energy and angle resolution x-ray optical modules for pre- and post-processing the x-ray beam; 4 circle diffractometer with sample stage allowing X, Y, Z translations, sample rotation and tilt adjustment perpendicular to the incident beam. The optics modules will be chosen according to required beam intensity, collimation, resolution and size.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-046de8
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/025934-2024
- Current Stage
- Award
- All Stages
- Tender, Award
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- SME
Common Procurement Vocabulary (CPV)
- CPV Divisions
33 - Medical equipments, pharmaceuticals and personal care products
-
- CPV Codes
33111000 - X-ray devices
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £208,217 £100K-£500K
Notice Dates
- Publication Date
- 15 Aug 20241 years ago
- Submission Deadline
- 8 Jul 2024Expired
- Future Notice Date
- Not specified
- Award Date
- 11 Aug 20241 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Cancelled
- Awards Status
- Active
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- DIAMOND LIGHT SOURCE LTD
- Contact Name
- Debbie Pryor
- Contact Email
- procurement@diamond.ac.uk
- Contact Phone
- +44 1235567575
Buyer Location
- Locality
- DIDCOT
- Postcode
- OX11 0ED
- Post Town
- Oxford
- Country
- England
-
- Major Region (ITL 1)
- TLJ South East (England)
- Basic Region (ITL 2)
- TLJ1 Berkshire, Buckinghamshire and Oxfordshire
- Small Region (ITL 3)
- TLJ14 Oxfordshire CC
- Delivery Location
- TLJ14 Oxfordshire CC
-
- Local Authority
- Vale of White Horse
- Electoral Ward
- Blewbury & Harwell
- Westminster Constituency
- Didcot and Wantage
Further Information
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-046de8-2024-08-15T11:21:43+01:00",
"date": "2024-08-15T11:21:43+01:00",
"ocid": "ocds-h6vhtk-046de8",
"initiationType": "tender",
"tender": {
"id": "8041768",
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
},
"title": "8041768 - Supply of an X-ray Diffractometer",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "33111000",
"description": "X-ray devices"
},
"mainProcurementCategory": "goods",
"description": "Located on the Harwell Science and Innovation Campus in Oxfordshire, Diamond is a leadingedge facility for science, engineering and innovation. It is the largest science facility to be built in the UK for 40 years and produces ultra-violet, infra-red and X-ray beams of exceptional brightness. The scope is to deliver, install and commission a versatile x-ray system based on an x-ray source, optics, diffractometer and detector. The system will be located at a permanent fixed position on the floor of the Optics Fabrication Building Lab. 5. The instrument will be mainly dedicated for reflectivity measurements to characterise testing of multilayer optical elements for the Multilayer Deposition System. The optical elements to be tested are mirrors, thin films and multilayers. These will be either free standing or mounted on holders. Therefore, a large range of sample weights and sizes should be possible to be installed on the diffractometer. It is envisaged that the instrument will be used for measuring high resolution reflectivity. Mirror and multilayer measurements will be done at grazing incidence angle. The diffractometer will have to accommodate samples weighing up to 1 kg with dimensions up to 100mm (Length)x50mm (Width)x50 mm (Height)., appropriate stage motion to perform measurements at different positions on (to map) the sample. It is expected that the versatile x-ray diffractometer will be based on: a high intensity x-ray tube with a copper target; interchangeable, high energy and angle resolution x-ray optical modules for pre- and post-processing the x-ray beam; 4 circle diffractometer with sample stage allowing X, Y, Z translations, sample rotation and tilt adjustment perpendicular to the incident beam. The optics modules will be chosen according to required beam intensity, collimation, resolution and size.",
"lots": [
{
"id": "1",
"description": "Located on the Harwell Science and Innovation Campus in Oxfordshire, Diamond is a leadingedge facility for science, engineering and innovation. It is the largest science facility to be built in the UK for 40 years and produces ultra-violet, infra-red and X-ray beams of exceptional brightness. The scope is to deliver, install and commission a versatile x-ray system based on an x-ray source, optics, diffractometer and detector. The system will be located at a permanent fixed position on the floor of the Optics Fabrication Building Lab. 5. The instrument will be mainly dedicated for reflectivity measurements to characterise testing of multilayer optical elements for the Multilayer Deposition System. The optical elements to be tested are mirrors, thin films and multilayers. These will be either free standing or mounted on holders. Therefore, a large range of sample weights and sizes should be possible to be installed on the diffractometer. It is envisaged that the instrument will be used for measuring high resolution reflectivity. Mirror and multilayer measurements will be done at grazing incidence angle. The diffractometer will have to accommodate samples weighing up to 1 kg with dimensions up to 100mm (Length)x50mm (Width)x50 mm (Height)., appropriate stage motion to perform measurements at different positions on (to map) the sample. It is expected that the versatile x-ray diffractometer will be based on: a high intensity x-ray tube with a copper target; interchangeable, high energy and angle resolution x-ray optical modules for pre- and post-processing the x-ray beam; 4 circle diffractometer with sample stage allowing X, Y, Z translations, sample rotation and tilt adjustment perpendicular to the incident beam. The optics modules will be chosen according to required beam intensity, collimation, resolution and size.",
"awardCriteria": {
"criteria": [
{
"name": "Technical Quality",
"type": "quality",
"description": "20"
},
{
"name": "Experience & Capacity",
"type": "quality",
"description": "25"
},
{
"name": "Delivery",
"type": "quality",
"description": "5"
},
{
"name": "Commercial",
"type": "quality",
"description": "5"
},
{
"name": "DLS Support Effort",
"type": "quality",
"description": "5"
},
{
"type": "price",
"description": "40"
}
]
},
"contractPeriod": {
"durationInDays": 240
},
"hasRenewal": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"hasOptions": false,
"status": "cancelled"
}
],
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"region": "UKJ14"
},
{
"region": "UKJ14"
}
],
"relatedLot": "1"
}
],
"submissionMethod": [
"electronicSubmission",
"written"
],
"submissionMethodDetails": "https://www.diamondtenders@diamond.ac.uk",
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure",
"coveredBy": [
"GPA"
],
"tenderPeriod": {
"endDate": "2024-07-08T12:00:00+01:00"
},
"submissionTerms": {
"languages": [
"en"
],
"bidValidityPeriod": {
"durationInDays": 90
}
},
"awardPeriod": {
"startDate": "2024-07-08T13:00:00+01:00"
},
"bidOpening": {
"date": "2024-07-08T13:00:00+01:00"
},
"hasRecurrence": false
},
"parties": [
{
"id": "GB-COH-4375679",
"name": "Diamond Light Source Ltd",
"identifier": {
"legalName": "Diamond Light Source Ltd",
"id": "4375679",
"scheme": "GB-COH"
},
"address": {
"streetAddress": "Harwell Science and Innovation Campus",
"locality": "Didcot",
"region": "UKJ14",
"postalCode": "OX11 0ED",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Debbie Pryor",
"telephone": "+44 1235567575",
"email": "procurement@diamond.ac.uk",
"url": "https://www.diamondtenders@diamond.ac.uk/Home.aspx"
},
"roles": [
"buyer"
],
"details": {
"url": "https://www.diamond.ac.uk",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "BODY_PUBLIC",
"description": "Body governed by public law"
},
{
"scheme": "COFOG",
"description": "Scientific Research"
}
]
}
},
{
"id": "GB-FTS-89839",
"name": "Diamond Light Source",
"identifier": {
"legalName": "Diamond Light Source"
},
"address": {
"streetAddress": "Harwell Science and Innovation Campus",
"locality": "Didcot",
"postalCode": "OX11 0ED",
"countryName": "United Kingdom"
},
"roles": [
"reviewBody"
]
},
{
"id": "GB-COH-923986",
"name": "Bruker UK Limited",
"identifier": {
"legalName": "Bruker UK Limited",
"id": "923986",
"scheme": "GB-COH"
},
"address": {
"locality": "Coventry",
"region": "UKG33",
"postalCode": "CV4 8HZ",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme"
}
}
],
"buyer": {
"id": "GB-COH-4375679",
"name": "Diamond Light Source Ltd"
},
"language": "en",
"awards": [
{
"id": "025934-2024-8041768-1",
"relatedLots": [
"1"
],
"title": "Supply of a an X-ray Diffractometer",
"status": "active",
"suppliers": [
{
"id": "GB-COH-923986",
"name": "Bruker UK Limited"
}
]
}
],
"contracts": [
{
"id": "025934-2024-8041768-1",
"awardID": "025934-2024-8041768-1",
"title": "Supply of a an X-ray Diffractometer",
"status": "active",
"value": {
"amount": 208217,
"currency": "GBP"
},
"dateSigned": "2024-08-12T00:00:00+01:00"
}
],
"bids": {
"statistics": [
{
"id": "1",
"measure": "bids",
"relatedLot": "1",
"value": 3
},
{
"id": "2",
"measure": "smeBids",
"relatedLot": "1",
"value": 2
},
{
"id": "3",
"measure": "electronicBids",
"relatedLot": "1",
"value": 3
}
]
}
}