Notice Information
Notice Title
PIN - Modern Methods of Construction Supplier Engagement
Notice Description
The Offsite Homes Alliance wish to engage with MMC (Modern Methods of Construction) suppliers offering categories 1,2,and 5 solutions as defined in the MMC Definition Framework, to evaluate the current OSHA designs and zero carbon roadmap. This is to ensure that the client(s) and the MMC supply chain, are in agreement with the Design for Manufacturing and Assembly (DfMA) strategy, before a full procurement process begins with selected partners.
Lot Information
Lot 1 Pre-Manufacturing - 3D primary structural systems
Pre-Manufacturing - 3D primary structural systems A systematised approach based on volumetric construction involving the production of three-dimensional units in controlled factory conditions prior to final installation. Volumetric units can be brought to the final site in a variety of forms ranging from a basic structure only to one with all internal and external finishes and services installed, all ready for installation. The system includes structural performance. Full volumetric units in apartment buildings can include apartment space and common area space. Mini volumetric structural units can include bathroom pods and the like which are structurally stacked and loaded.'
Lot 2 Pre-manufacturing (2D primary structural systems)Pre-manufacturing (2D primary structural systems) A systematised approach using flat panel units for basic floor, wall and roof structures of varying materials which are produced in a factory environment and assembled at the final workface to produce a final three-dimensional structure. The most common approach is to use open panels or frames, which consist of a skeletal structure only, with services, insulation, external cladding and internal finishing being installed on site. 'More complex panels - typically referred to as closed panels - involve more factory-based fabrication and include lining materials and insulation. These may also include services, windows, doors, internal wall finishes and external claddings. The system includes structural performance for primary walls and all floors (note - this excludes unitised or composite external walling systems that are not load bearing included in Category 5).
Lot 5 Pre-manufacturing (non structural assemblies and sub-assemblies)Pre-manufacturing (non structural assemblies and sub-assemblies) A series of different pre-manufacturing approaches that includes unitised non-structural walling systems, roofing finish cassettes or assemblies (where not part of a wider structural building system), non-load bearing mini-volumetric units (sometimes referred to as 'pods') used for the highly serviced and more repeatable areas such as kitchens and bathrooms, utility cupboards, risers, plant rooms as well as pre-formed wiring looms, mechanical engineering composites would fall into this category. 'Conventional masonry site constructed schemes utilising conventional building products such as windows and or door-sets - which might otherwise be part of the fabrication process in the other pre-manufacturing categories - should not be included as sub-assemblies or components in this category unless there is a further level of consolidation from traditional configurations. Also excludes and structural base elements that composite assemblies are fixed to and which are to be included in Cats 1-4. Any structure in this category is purely to support the sub-assembly in transit / install phase.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-02ed22
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/026062-2021
- Current Stage
- Tender
- All Stages
- Planning, Tender
Procurement Classification
- Notice Type
- Planning Notice
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Not Specified
- Procurement Method Details
- Not specified
- Tender Suitability
- Not specified
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
44 - Construction structures and materials; auxiliary products to construction (except electric apparatus)
45 - Construction work
-
- CPV Codes
44110000 - Construction materials
45000000 - Construction work
Notice Value(s)
- Tender Value
- £4,000,000,000 £1B-£10B
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 19 Oct 20214 years ago
- Submission Deadline
- Not specified
- Future Notice Date
- 15 Nov 2021Expired
- Award Date
- Not specified
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Planned
- Lots Status
- Planned
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- GREAT PLACES HOUSING GROUP
- Additional Buyers
- Contact Name
- Mr Robert Ireland
- Contact Email
- mike.ormesher@offsiteha.org, robert.ireland@greatplaces.org.uk
- Contact Phone
- +44 1614475176
Buyer Location
- Locality
- MANCHESTER
- Postcode
- M21 7QP
- Post Town
- Manchester
- Country
- England
-
- Major Region (ITL 1)
- TLD North West (England)
- Basic Region (ITL 2)
- TLD3 Greater Manchester
- Small Region (ITL 3)
- TLD33 Manchester
- Delivery Location
- Not specified
-
- Local Authority
- Manchester
- Electoral Ward
- Chorlton Park
- Westminster Constituency
- Manchester Withington
Further Information
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-02ed22-2021-10-19T09:40:46+01:00",
"date": "2021-10-19T09:40:46+01:00",
"ocid": "ocds-h6vhtk-02ed22",
"description": "Great Places Housing Group is publishing this notice on behalf of The Offsite Homes Alliance (OSHA) which consists of 23 Registered Providers, largely based in the North of England. The alliance partners' strategy is to deliver circa 10,000+ high quality homes per annum from 2023 onwards across the North, with a focus on as many Modern Methods of Construction (MMC)/off-site technologies it can within reason, to support the ambition. OSHA partners wish to conduct soft market testing (SMT) with MMC suppliers offering categories 1,2,and 5 solutions as defined in the MMC Definition Framework and as set out in the proposed lots above. The purpose of this SMT is to evaluate the current OSHA designs and zero carbon roadmap. This is to ensure that the OSHA members and the MMC supply chain are in agreement with the Design for Manufacturing and Assembly (DfMA) strategy, before OSHA considers moving forward to procurement. As part of the SMT, OSHA has designed a short questionnaire that is available to download from https://www.offsiteha.org/supply-chain-engagement/ . OSHA partners would be grateful for potential suppliers' time in completing this questionnaire as the responses will be helpful in formulating OSHA's procurement, design and contracting strategy. OSHA and Great Places may request that potential suppliers discuss their responses through clarification meetings as part of the SMT process. Great Places and OSHA are ensuring that this SMT process is run in a fair and transparent manner. Any relevant information made available in this process will also be made available during any later procurement process. Potential suppliers should note that this notice does not commit Great Places or OSHA to proceeding to procurement at the time indicated or at all. If there are any queries about the process, please contact robert.ireland@greatplaces.org.uk.",
"initiationType": "tender",
"tender": {
"id": "DN573213",
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
},
"title": "PIN - Modern Methods of Construction Supplier Engagement",
"status": "planned",
"classification": {
"scheme": "CPV",
"id": "45000000",
"description": "Construction work"
},
"mainProcurementCategory": "works",
"description": "The Offsite Homes Alliance wish to engage with MMC (Modern Methods of Construction) suppliers offering categories 1,2,and 5 solutions as defined in the MMC Definition Framework, to evaluate the current OSHA designs and zero carbon roadmap. This is to ensure that the client(s) and the MMC supply chain, are in agreement with the Design for Manufacturing and Assembly (DfMA) strategy, before a full procurement process begins with selected partners.",
"value": {
"amount": 4000000000,
"currency": "GBP"
},
"lots": [
{
"id": "1",
"title": "Lot 1 Pre-Manufacturing - 3D primary structural systems",
"description": "Pre-Manufacturing - 3D primary structural systems A systematised approach based on volumetric construction involving the production of three-dimensional units in controlled factory conditions prior to final installation. Volumetric units can be brought to the final site in a variety of forms ranging from a basic structure only to one with all internal and external finishes and services installed, all ready for installation. The system includes structural performance. Full volumetric units in apartment buildings can include apartment space and common area space. Mini volumetric structural units can include bathroom pods and the like which are structurally stacked and loaded.'",
"status": "planned"
},
{
"id": "2",
"title": "Lot 2 Pre-manufacturing (2D primary structural systems)",
"description": "Pre-manufacturing (2D primary structural systems) A systematised approach using flat panel units for basic floor, wall and roof structures of varying materials which are produced in a factory environment and assembled at the final workface to produce a final three-dimensional structure. The most common approach is to use open panels or frames, which consist of a skeletal structure only, with services, insulation, external cladding and internal finishing being installed on site. 'More complex panels - typically referred to as closed panels - involve more factory-based fabrication and include lining materials and insulation. These may also include services, windows, doors, internal wall finishes and external claddings. The system includes structural performance for primary walls and all floors (note - this excludes unitised or composite external walling systems that are not load bearing included in Category 5).",
"status": "planned"
},
{
"id": "3",
"title": "Lot 5 Pre-manufacturing (non structural assemblies and sub-assemblies)",
"description": "Pre-manufacturing (non structural assemblies and sub-assemblies) A series of different pre-manufacturing approaches that includes unitised non-structural walling systems, roofing finish cassettes or assemblies (where not part of a wider structural building system), non-load bearing mini-volumetric units (sometimes referred to as 'pods') used for the highly serviced and more repeatable areas such as kitchens and bathrooms, utility cupboards, risers, plant rooms as well as pre-formed wiring looms, mechanical engineering composites would fall into this category. 'Conventional masonry site constructed schemes utilising conventional building products such as windows and or door-sets - which might otherwise be part of the fabrication process in the other pre-manufacturing categories - should not be included as sub-assemblies or components in this category unless there is a further level of consolidation from traditional configurations. Also excludes and structural base elements that composite assemblies are fixed to and which are to be included in Cats 1-4. Any structure in this category is purely to support the sub-assembly in transit / install phase.",
"status": "planned"
}
],
"items": [
{
"id": "1",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "44110000",
"description": "Construction materials"
}
],
"deliveryAddresses": [
{
"region": "UK"
}
],
"relatedLot": "1"
},
{
"id": "2",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "44110000",
"description": "Construction materials"
}
],
"deliveryAddresses": [
{
"region": "UK"
}
],
"relatedLot": "2"
},
{
"id": "3",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "44110000",
"description": "Construction materials"
}
],
"deliveryAddresses": [
{
"region": "UK"
}
],
"relatedLot": "3"
}
],
"communication": {
"futureNoticeDate": "2021-11-15T00:00:00Z"
},
"amendments": [
{
"id": "1",
"unstructuredChanges": [
{
"oldValue": {
"text": "Off-Site Homes Alliance Norfolk House, Hardwick Square North Buxton SK17 6PU"
},
"newValue": {
"text": "Great Places Housing Group 2A Derwent Avenue West Didsbury Manchester M21 7QP"
},
"where": {
"section": "I.1",
"label": "Name and addresses"
}
}
],
"description": "Incorrect address entered on first submission"
}
]
},
"parties": [
{
"id": "GB-FTS-31866",
"name": "Great Places Housing Group",
"identifier": {
"legalName": "Great Places Housing Group"
},
"address": {
"streetAddress": "2A Derwent Avenue",
"locality": "Manchester",
"region": "UK",
"postalCode": "M21 7QP",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Mr Robert Ireland",
"telephone": "+44 1614475176",
"email": "robert.ireland@greatplaces.org.uk"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.greatplaces.org.uk/Pages/default.aspx",
"buyerProfile": "http://www.greatplaces.org.uk/Pages/default.aspx",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "BODY_PUBLIC",
"description": "Body governed by public law"
},
{
"scheme": "COFOG",
"id": "06",
"description": "Housing and community amenities"
}
]
}
},
{
"id": "GB-FTS-31867",
"name": "Off-Site Homes Alliance",
"identifier": {
"legalName": "Off-Site Homes Alliance"
},
"address": {
"streetAddress": "Norfolk House, Hardwick Square North",
"locality": "Buxton",
"region": "UK",
"postalCode": "SK17 6PU",
"countryName": "United Kingdom"
},
"contactPoint": {
"email": "mike.ormesher@offsiteha.org"
},
"roles": [
"buyer"
],
"details": {
"url": "https://www.offsiteha.org/"
}
},
{
"id": "GB-FTS-6269",
"name": "Great Places Housing Group",
"identifier": {
"legalName": "Great Places Housing Group"
},
"address": {
"streetAddress": "No. 1 Christie Fields",
"locality": "Manchester",
"region": "UK",
"postalCode": "M21 7QP",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Mr Robert Ireland",
"telephone": "+44 1614475176",
"email": "robert.ireland@greatplaces.org.uk"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.greatplaces.org.uk/Pages/default.aspx",
"buyerProfile": "http://www.greatplaces.org.uk/Pages/default.aspx"
}
}
],
"buyer": {
"id": "GB-FTS-6269",
"name": "Great Places Housing Group"
},
"language": "en"
}