Notice Information
Notice Title
D3 Cruise Berth
Notice Description
Belfast Harbour Commissioners is seeking expressions of interest from contractors who may wish to submit a tender for the construction of a new heavy duty quay and deep water berth at D3, a 46 acre reclaimed site at the northern extent of Belfast Harbour. The primary requirement of the project is to provide a new berth for the increasing number of cruise ships which call to Belfast, but there are several other possible future uses for the quay which have been considered in the design, including dry bulk, break bulk and project cargoes such as those associated with the offshore wind industry. The scope of work will include construction of a 340m combi-wall type quay structure with mooring dolphins built approximately 60m out from the existing revetment, with mooring dolphins and return walls at either end and a heavy duty relieving slab and infill behind. There will also be dredging of the berthing pocket, hinterland surfacing and associated drainage, lighting, access roadway and services.
Lot Information
Lot 1
This procurement relates to the construction of a new heavy duty quay and deep water berth at D3, a 46 acre reclaimed site at the northern extent of Belfast Harbour. Full planning permission was granted on 23rd July 2019 (reference number LA04/2016/0421/F) and is valid for 5 years (expires July 2024). Marine licences were issued in July 2022. The primary function of the project is as a new cruise berth to accommodate vessels up to 360m in length. However, there are several other possible uses for D3 such as dry bulk, break bulk and project cargoes, including for the offshore wind industry, which have also been considered in the design. The scope of work consists of a 340m combi-wall type quay structure with return walls and mooring dolphins at either end which will be built approximately 60m out from the existing revetment. Compacted rock fill will be placed behind the the quay wall and a 35-50m wide heavy duty piled relieving slab is to be constructed along the length of the quay. The berth pocket and approaches will be dredged to up to -13mHD. The will also be hinterland asphalt surfacing and associated drainage; fenders and bollards, high mast lighting, foundations for a cruise building and electrical infrastructure, and a new access roadway with entrance barriers, lighting and services including power, water, telecoms ducts and sewerage. This tender process has been structured in 2 stages as described below. In Stage 1, all shortlisted Bidders will be invited to submit tenders which will be assessed on the basis of 50% quality and 50% cost, based on an exemplar design which will be provided in the tender documents. The successful tenderer will be appointed under the terms of a Pre-Construction Services Agreement to work with BHC and its design team in Stage 2 to develop the precise scope and cost for the final scheme and to facilitate an open book tendering process for the key sub-contract packages at Stage 2. This will enable BHC to progress commercial arrangements with potential end users and take forward an FID proposal for Board approval. If approved, and subject to the terms of the Pre-Construction Services Agreement, then BHC may, at its discretion, appoint the successful tenderer to undertake the works. It is intended that the FIDIC Conditions of Contract for Construction (for Building and Engineering Works designed by the Employer) will be used, but with amendments to suit this particular project. It is currently anticipated that quality submissions at Stage 1 will require shortlisted Bidders to answer a number of questions on their approach to management and delivery of the project, which will be evaluated and an overall quality score awarded. The price aspect will require shortlisted Bidders to price an exemplar design via a Bill of Quantities. The purpose of the pricing assessment at Stage 1 of the process will not be to identify a contract sum for the works, but to identify the most economically advantageous tender and obtain an accurate cost for the exemplar design, with reliable rates for all the key elements (e.g. piling, reinforced concrete, dredging, infilling). It is currently anticipated that the preliminaries, mark-up percentages and key rates will be fixed for Stage 2 of the tender process, to ensure consistency in pricing is maintained during any design development that may take place. In Stage 2, the design will be further developed and refined in conjunction with the successful tenderer to achieve the final agreed scope, programme and contract price for the works. It is expected that a number of design development workshops will be held. The successful tenderer will be expected to bring their expertise in programming, buildability, optioneering, value engineering and health & safety, quality and environmental best practice into the process. The Pre-Construction Services Agreement will set out the terms under which the design development fees will be paid. In the event of any significant changes in scope or programme during the design development process, any additional fees payable to the contractor will be calculated based on the hourly rates for team members specified by the contractor in its tender submission. Contractors who wish to participate in this procurement will be required to provide contact details before downloading the tender documents. Contractors who fail to provide their details to BHC or register in this manner will not receive any clarifications or updated information provided by BHC during the tender process.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-03cdc0
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/014291-2023
- Current Stage
- Tender
- All Stages
- Tender
Procurement Classification
- Notice Type
- Tender Notice
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Selective
- Procurement Method Details
- Negotiated procedure with prior call for competition
- Tender Suitability
- Not specified
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
45 - Construction work
-
- CPV Codes
45000000 - Construction work
45220000 - Engineering works and construction works
Notice Value(s)
- Tender Value
- £100,000,000 £100M-£1B
- Lots Value
- £100,000,000 £100M-£1B
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 19 May 20232 years ago
- Submission Deadline
- 12 Jun 2023Expired
- Future Notice Date
- Not specified
- Award Date
- Not specified
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Active
- Lots Status
- Active
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- BELFAST HARBOUR COMMISSIONERS
- Contact Name
- Eugene McBride
- Contact Email
- tendersfc@belfast-harbour.co.uk
- Contact Phone
- +44 2890554422
Buyer Location
- Locality
- BELFAST
- Postcode
- BT1 3AL
- Post Town
- Northern Ireland
- Country
- Northern Ireland
-
- Major Region (ITL 1)
- TLN Northern Ireland
- Basic Region (ITL 2)
- TLN0 Northern Ireland
- Small Region (ITL 3)
- TLN06 Belfast
- Delivery Location
- TLN06 Belfast
-
- Local Authority
- Belfast
- Electoral Ward
- Duncairn
- Westminster Constituency
- Belfast North
Further Information
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-03cdc0-2023-05-19T10:26:35+01:00",
"date": "2023-05-19T10:26:35+01:00",
"ocid": "ocds-h6vhtk-03cdc0",
"description": "BHC reserves the right at any time to: - reject any or all responses and to cancel or withdraw from this procurement at any stage; - award a contract without prior notice; - change the basis, the procedures and timescales set out or referred to within the procurement documents; or - require a bidder to clarify any submissions in writing and/or to provide additional information. Bidders who wish to participate in this procurement will be required to provide contact details before downloading the tender documents. Bidders who fail to provide their details to BHC or register in this manner will not receive any clarifications or updated information provided by BHC during the tender process. The costs of responding to this notice and participation in the process will be borne by each bidder. All discussions and correspondence will be deemed strictly subject to contract until a formal contract is entered into. The formal contract shall not be binding until it has been signed and dated by the duly authorised representatives of both parties.",
"initiationType": "tender",
"tender": {
"id": "P271",
"legalBasis": {
"id": "32014L0025",
"scheme": "CELEX"
},
"title": "D3 Cruise Berth",
"status": "active",
"classification": {
"scheme": "CPV",
"id": "45220000",
"description": "Engineering works and construction works"
},
"mainProcurementCategory": "works",
"description": "Belfast Harbour Commissioners is seeking expressions of interest from contractors who may wish to submit a tender for the construction of a new heavy duty quay and deep water berth at D3, a 46 acre reclaimed site at the northern extent of Belfast Harbour. The primary requirement of the project is to provide a new berth for the increasing number of cruise ships which call to Belfast, but there are several other possible future uses for the quay which have been considered in the design, including dry bulk, break bulk and project cargoes such as those associated with the offshore wind industry. The scope of work will include construction of a 340m combi-wall type quay structure with mooring dolphins built approximately 60m out from the existing revetment, with mooring dolphins and return walls at either end and a heavy duty relieving slab and infill behind. There will also be dredging of the berthing pocket, hinterland surfacing and associated drainage, lighting, access roadway and services.",
"value": {
"amount": 100000000,
"currency": "GBP"
},
"lots": [
{
"id": "1",
"description": "This procurement relates to the construction of a new heavy duty quay and deep water berth at D3, a 46 acre reclaimed site at the northern extent of Belfast Harbour. Full planning permission was granted on 23rd July 2019 (reference number LA04/2016/0421/F) and is valid for 5 years (expires July 2024). Marine licences were issued in July 2022. The primary function of the project is as a new cruise berth to accommodate vessels up to 360m in length. However, there are several other possible uses for D3 such as dry bulk, break bulk and project cargoes, including for the offshore wind industry, which have also been considered in the design. The scope of work consists of a 340m combi-wall type quay structure with return walls and mooring dolphins at either end which will be built approximately 60m out from the existing revetment. Compacted rock fill will be placed behind the the quay wall and a 35-50m wide heavy duty piled relieving slab is to be constructed along the length of the quay. The berth pocket and approaches will be dredged to up to -13mHD. The will also be hinterland asphalt surfacing and associated drainage; fenders and bollards, high mast lighting, foundations for a cruise building and electrical infrastructure, and a new access roadway with entrance barriers, lighting and services including power, water, telecoms ducts and sewerage. This tender process has been structured in 2 stages as described below. In Stage 1, all shortlisted Bidders will be invited to submit tenders which will be assessed on the basis of 50% quality and 50% cost, based on an exemplar design which will be provided in the tender documents. The successful tenderer will be appointed under the terms of a Pre-Construction Services Agreement to work with BHC and its design team in Stage 2 to develop the precise scope and cost for the final scheme and to facilitate an open book tendering process for the key sub-contract packages at Stage 2. This will enable BHC to progress commercial arrangements with potential end users and take forward an FID proposal for Board approval. If approved, and subject to the terms of the Pre-Construction Services Agreement, then BHC may, at its discretion, appoint the successful tenderer to undertake the works. It is intended that the FIDIC Conditions of Contract for Construction (for Building and Engineering Works designed by the Employer) will be used, but with amendments to suit this particular project. It is currently anticipated that quality submissions at Stage 1 will require shortlisted Bidders to answer a number of questions on their approach to management and delivery of the project, which will be evaluated and an overall quality score awarded. The price aspect will require shortlisted Bidders to price an exemplar design via a Bill of Quantities. The purpose of the pricing assessment at Stage 1 of the process will not be to identify a contract sum for the works, but to identify the most economically advantageous tender and obtain an accurate cost for the exemplar design, with reliable rates for all the key elements (e.g. piling, reinforced concrete, dredging, infilling). It is currently anticipated that the preliminaries, mark-up percentages and key rates will be fixed for Stage 2 of the tender process, to ensure consistency in pricing is maintained during any design development that may take place. In Stage 2, the design will be further developed and refined in conjunction with the successful tenderer to achieve the final agreed scope, programme and contract price for the works. It is expected that a number of design development workshops will be held. The successful tenderer will be expected to bring their expertise in programming, buildability, optioneering, value engineering and health & safety, quality and environmental best practice into the process. The Pre-Construction Services Agreement will set out the terms under which the design development fees will be paid. In the event of any significant changes in scope or programme during the design development process, any additional fees payable to the contractor will be calculated based on the hourly rates for team members specified by the contractor in its tender submission. Contractors who wish to participate in this procurement will be required to provide contact details before downloading the tender documents. Contractors who fail to provide their details to BHC or register in this manner will not receive any clarifications or updated information provided by BHC during the tender process.",
"value": {
"amount": 100000000,
"currency": "GBP"
},
"contractPeriod": {
"durationInDays": 960
},
"hasRenewal": false,
"secondStage": {
"minimumCandidates": 6,
"maximumCandidates": 6
},
"selectionCriteria": {
"description": "Subject to a sufficient number of compliant responses being received, BHC intends (according to the process described in the Pre-Qualification Questionnaire) to invite a maximum of the top 6 (six) ranked compliant Applicants to the invitation to tender stage of this process, provided that BHC, acting at its discretion, reserves the right to invite less than 6 (six) Applicants to negotiate. Where there is a tie for 6th (sixth) place, all Applicants in 6th (sixth) place will be invited to tender. For the purposes of this exercise, a tie for 6th (sixth) place is deemed to occur where two or more Applicants have identical scores."
},
"submissionTerms": {
"variantPolicy": "allowed"
},
"hasOptions": false,
"status": "active"
}
],
"items": [
{
"id": "1",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "45000000",
"description": "Construction work"
}
],
"deliveryAddresses": [
{
"region": "UKN06"
}
],
"deliveryLocation": {
"description": "Belfast Harbour"
},
"relatedLot": "1"
}
],
"participationFees": [
{
"id": "1",
"type": [
"document"
]
}
],
"submissionMethod": [
"written"
],
"selectionCriteria": {
"criteria": [
{
"type": "suitability",
"description": "Price is not the only award criterion and all criteria are stated only in the procurement documents",
"appliesTo": [
"supplier"
]
}
]
},
"documents": [
{
"id": "economic",
"documentType": "economicSelectionCriteria"
},
{
"id": "technical",
"documentType": "technicalSelectionCriteria"
}
],
"submissionTerms": {
"depositsGuarantees": "Please refer to the Pre-Qualification Questionnaire. Furthermore BHC reserves the right to require bonds, deposits, guarantees or other forms of undertaking or security to ensure proper contractual performance.",
"languages": [
"en"
],
"bidValidityPeriod": {
"durationInDays": 90
}
},
"contractTerms": {
"financialTerms": "Further information will be provided in the contract documents.",
"tendererLegalForm": "Subject to the status and involvement of the parties, BHC may require the parties to commit to joint and several liability in respect of the contract. Alternatively, BHC may require the lead operator to take total responsibility or a consortium to form a legal entity before entering into any contract.",
"performanceTerms": "Further information will be provided within the Pre-Qualification Questionnaire & Invitation to Tender documents.",
"electronicInvoicingPolicy": "allowed"
},
"otherRequirements": {
"requiresStaffNamesAndQualifications": true
},
"procurementMethod": "selective",
"procurementMethodDetails": "Negotiated procedure with prior call for competition",
"coveredBy": [
"GPA"
],
"tenderPeriod": {
"endDate": "2023-06-12T12:00:00+01:00"
},
"secondStage": {
"invitationDate": "2023-06-30T00:00:00+01:00"
},
"hasRecurrence": false,
"reviewDetails": "BHC will incorporate a minimum 10 calendar day standstill period at the point information on the award of contract is communicated to all bidders. The standstill period provides time for unsuccessful bidders to challenge the award decision before the contract is entered into. The Utilities Contracts Regulations 2016 (as amended) provide for aggrieved parties who have been harmed or are at risk of harm by a breach of the rules to take action in the High Court (Northern Ireland)."
},
"parties": [
{
"id": "GB-FTS-83178",
"name": "BELFAST HARBOUR COMMISSIONERS",
"identifier": {
"legalName": "BELFAST HARBOUR COMMISSIONERS",
"noIdentifierRationale": "notOnAnyRegister"
},
"address": {
"streetAddress": "Harbour Office, Corporation Square",
"locality": "BELFAST",
"region": "UKN06",
"postalCode": "BT1 3AL",
"countryName": "United Kingdom"
},
"contactPoint": {
"name": "Eugene McBride",
"telephone": "+44 2890554422",
"email": "tendersfc@belfast-harbour.co.uk",
"url": "http://www.belfast-harbour.co.uk/corporate/corporate-tender"
},
"roles": [
"buyer"
],
"details": {
"url": "http://www.belfast-harbour.co.uk/",
"classifications": [
{
"scheme": "TED_CE_ACTIVITY",
"id": "PORT_RELATED_ACTIVITIES",
"description": "Port-related activities"
}
]
}
},
{
"id": "GB-FTS-9400",
"name": "High Court of Justice in Northern Ireland",
"identifier": {
"legalName": "High Court of Justice in Northern Ireland"
},
"address": {
"streetAddress": "Royal Courts of Justice, Chichester Street",
"locality": "Belfast",
"postalCode": "BT1 3JF",
"countryName": "United Kingdom"
},
"contactPoint": {
"email": "office@courtsni.gov.uk"
},
"roles": [
"reviewBody"
]
},
{
"id": "GB-FTS-15894",
"name": "Belfast Harbour Commissioners",
"identifier": {
"legalName": "Belfast Harbour Commissioners"
},
"address": {
"streetAddress": "Harbour Office, Corporation Square",
"locality": "Belfast",
"postalCode": "BT1 3AL",
"countryName": "United Kingdom"
},
"roles": [
"reviewContactPoint"
],
"details": {
"url": "http://www.belfast-harbour.co.uk"
}
}
],
"buyer": {
"id": "GB-FTS-83178",
"name": "BELFAST HARBOUR COMMISSIONERS"
},
"language": "en"
}