This public procurement record has 1 release in its history.

Planning

10 Nov 2026 at 10:20

Summary of the contracting process

The City of London Corporation plans to procure joinery and fit-out works for its Barbican Renewal Programme. The package covers internal doors and hardware, fitted joinery and furniture, partitions, ceilings, wall and floor finishes, sanitaryware and related refurbishment across the Foyers, Conservatory, Art Gallery Foyers, Catering Block, Stair 8 and infrastructure areas. Staff Spaces and further areas, including Creative Studios and fire-door replacement, may also be included provisionally. Work includes new, bespoke and refurbished heritage elements; doorsets and hardware make up most of the listed items. The work will be delivered at the Barbican in the City of London. The buying organisation is the Mayor and Commonalty and Citizens of the City of London. This is a substantial building fit-out and joinery works package (CPV 45421000).

The procurement is at planning stage: the buyer has announced an intention to procure, but has not issued an invitation to tender. It expects to use a two-stage competitive flexible procedure, with an invitation to participate followed by an invitation to tender. The buyer expects to publish the next notice on 18 November 2026. Expressions of interest are expected by 16 December 2026; enquiries are expected to close on 7 December 2026, and an award decision is expected by 19 March 2027. The estimated value is £6.5 million excluding VAT (£7.8 million including VAT). The contract is expected to run from 5 April 2027 to 14 November 2029, with a possible extension to 14 May 2030. One lot is planned. The buyer intends to shortlist four applicants, selected using financial, insurance, modern slavery and data protection requirements and scored experience questions.

This package is suited to contractors able to coordinate specialist joinery, doorsets, fit-out and refurbishment across a complex occupied or heritage building environment. The scope calls for technical design, detailed setting-out, system and component selection, shop drawings, certified product data, and operation and maintenance information. Fire-resisting doorsets require valid third-party certification, such as BM TRADA Q-Mark or BWF-CERTIFIRE, or an equivalent UKAS-accredited scheme, with supporting test evidence for seals and glazing. Suppliers should be prepared to demonstrate relevant experience through scored responses and meet financial capacity, insurance, modern slavery and data protection conditions. Specialist elm joinery capability, subcontractor visibility, and rigorous sample and mock-up processes are important. Coordination with the MEP contractor is needed for access control and services incorporated into joinery. SMEs are considered suitable. The buyer may request separately priced options and provisional repair sums.

How relevant is this notice?

Notice Information

Notice Title

Barbican Renewal Programme - Joinery and Fit out

Notice Description

Package: TP4400 covers the supply and installation of internal doors and door hardware, fitted joinery, internal linings and partitions, ceilings, floor and wall finishes, fitted furniture and sanitaryware across the Foyers (FY), Conservatory (CN), Art Gallery Foyers (AF), Catering Block (CB), Stair 8 (S8) and Infrastructure (IN) work areas, with further provisional areas (Staff Spaces, Creative Studios and the Fire Door Project). The items are a mix of new, bespoke and refurbished heritage work, and internal doorsets and door hardware make up the majority of the line items. The scope within each area is summarised below: * Foyers (FY) - doors and hardware: fire-rated and acoustic timber and metal doorsets (single, double, unequal, with vision panels and overpanels); new and refurbished heritage timber and glazed doors; fire-rated riser and shaft doors (noting electrical riser doors on movement joints); the refurbished goods lift door; front and back of house and WC doors; with door hardware sets and concealed SOSS hinges to maintenance access. * Foyers (FY) - joinery and fitted furniture: bars, bar shelving and light reflectors; welcome desks and the cloakroom counter; storage and shop joinery; ablution bench, sink assembly and storage; Quiet Room cabinet and shelving; WC corridor and lobby benches; West Ramp balustrade joinery; the suspended timber lattice ceiling; new and refurbished mirrors; a timber ventilation grille; the timber handrail; and the multifaith curtain and internal blinds. * Foyers (FY) - partitions, glazing and ceilings: finishes to fire-rated timber and plasterboard partitions and shaftwalls; MDF linings; laminated timber facing panels; terrazzo and timber partitions (terrazzo by TP4800); new and refurbished fixed glazed partitions; metal lattice ceiling refurbishment; and the raised access floor. The metallic leaf finish is a key quality point. * Foyers (FY) - floors and finishes: new and refurbished clay paving; wood floating floor; Curve Gallery escape stair timber treads; heavy-duty entrance matting; reclaimed and refurbished woodblock; rubber sheet, sisal and broadloom carpet; resin flooring; brass stair nosings; plaster, metallic leaf and paint; and screed. * Foyers (FY) - other: brass skirtings; refurbishment of balustrades and handrails and extension of brass handrails; new and refurbished grilles (price option); hose reel cover plates; the assisted-transfer hoist; superloo, ambulant, accessible and changing places fixtures and accessories and heritage WC sanitaryware and Advanced Works removals of the woodblock floor, MDF linings, terrazzo fixtures and the Car Park 5 ramp and access doors. The metalwork items above (brass skirtings, balustrades and handrails, grilles and hose reel cover plates) are priced as a separate option. * Conservatory (CN): internal timber and steel doorsets - fire-rated, acoustic, riser and shaft access, store, lobby and office doors - with door hardware sets, including refurbished glazed doors to Frobisher Crescent; the mobile bar, Garden Room backbar, built-in desk, shelves and cupboards, gardeners office furniture and lockers, aluminium storage cupboards, terrace duct enclosure and counter, plant-on skirting, and the timber lattice ceiling and bulkhead; kitchen systems and WC panel system; fitted furniture, crash rail and motorised blackout and roller blinds; acoustic metal slatted ceilings; hygienic PVC wall lining, wall tile repair, woodblock, rubber and vinyl safety flooring, carpet repairs, epoxy floor paint and paint to drylining, concrete and steelwork; brick paviours; and sanitaryware. Level 02 Theatre Office: new and repaired carpet tiles and trims, plant-on skirtings, repair and reinstatement of retained cupboards and panels, repair of existing timber doors and new acoustic doorsets. * Art Gallery Foyers (AF): doors and hardware; timber lattice ceiling and bulkhead; brass checkpoint desks and brass welcome desk; elm cloakroom wall and ceiling joinery with sliding pockets and elm wall lining and stable door; fire-resisting glazed screens and escape corridor enclosure; new and refurbished clay paving and entrance matting; rubber floor and paint; WC panel system; sanitaryware; and ceilings. * Catering Block (CB): doors and hardware; refurbished hinged and fixed mirrors; elm hardwood window-height table and sill; wall tile refurbishment and paint; clay paving, urinal-area floor infill and entrance matting; heritage WC sanitaryware; fire and smoke curtains at lift and service openings; and the foot pump refurbishment scope. * Stair 8 (S8): carpet to the stair; refurbishment of the retained brass stair nosings; retention and refurbishment of the existing glazed screen; and flooring. * Infrastructure (IN): floor and steelwork paint finishes; plant doorsets and door repairs and verification; and safety and fire signage. * Staff Spaces (Provisional Area): Internal doors, power assistance to existing doors, carpet, linoleum and matting, WC fixtures, fittings and panel systems, kitchen tea points, vanities and heritage ceiling repairs, acoustic wall panels and decorations, and the heritage sanitary areas. * Further provisional areas may include: Creative Studios; Fire Door Replacement, Wayfinding. Design Responsibility The package's doors, joinery, linings, partitions, ceilings, fitted furniture and floor finishes are generally Descriptive specifications within the design team's (Allies and Morrison and Asif Khan Studio) specifications: the design team sets the visual, functional and performance requirements, tolerances, basic setting out, typical interface details and the construction final issue drawings, and the Contractor completes the Technical Design. This includes system and component selection, detailed setting out, system construction details and shop drawings, certified data (including third-party fire assessments), and operation and maintenance information and as-built drawings. Where proprietary products are named, they are indicative only and the Contractor remains responsible for verifying their suitability. Doorsets are to be designed to BS EN 16034 / BS EN 14351-2 as appropriate, and fire-resisting doorsets must hold valid third-party certification (BM TRADA Q-Mark, BWF-CERTIFIRE or an equivalent UKAS-accredited scheme) with test evidence for seals and glazing. Door access control is to the MEP design: the Contractor provides the door-side preparation (concealed cableways, lock cases and contacts) and TP6000 MEP provides the system. Joinery incorporating lighting, speaker or electrical provisions is to be coordinated with the MEP Contractor, with mock-ups to the final materials and finishes. Elm timber work is highly specialist and depends on the quality of the base material, so Contractor visibility of its sub-contractors and a strict mock-up and sample process are required. Some finish systems, mainly floor, wall and paint finishes to the Conservatory, Art Gallery Foyers, Foyers and Stair 8, are Prescriptive specifications that are fully designed by the design team, with the Contractor constructing to the prescribed requirements.

Lot Information

Lot 1

Options: Tenderers will be asked to price the following items separately from the base package scope. They form no part of the Contractor's scope or design responsibility unless instructed by the Employer. The items are: (i) clay paving, priced separately for supply and installation from the same batch, to allow the Employer to decide whether the paving is procured direct or through a contractor; (ii) catering equipment, where the extent of supply and installation is to be confirmed, and which may be a separate package, supplied by the client or carried as a provisional sum; and the metalwork items in the Foyers - brass skirtings (AMT-FY-301), hose reel cover plates (AMT-FY-302), new and refurbished grilles and mesh (AMT-FY-420 to 424), new and refurbished balustrades (AMT-FY-503, 505 and 506) and the refurbishment and extension of brass handrails (AMT-FY-601, 602 and 605) - priced separately as an option. The same items are scoped within the Metalwork package, and the Employer will confirm the package under which the option is instructed. Because much of the package is refurbishment of existing doors, partitions, mirrors and linings, the extent of some repairs will only be confirmed after condition surveys, so provisional sums may be used for repairs beyond the anticipated scope

Renewal: Extensions may be used if there is programme overrun due to unforeseen events, such as discoveries.

Notice Details

Publication & Lifecycle

Open Contracting ID
ocds-h6vhtk-07b845
Publication Source
Find A Tender Service
Latest Notice
https://www.find-tender.service.gov.uk/Notice/106532-2026
Current Stage
Planning
All Stages
Planning

Procurement Classification

Notice Type
UK3 - Planned Procurement Notice
Procurement Type
Standard
Procurement Category
Works
Procurement Method
Selective
Procurement Method Details
Competitive flexible procedure
Tender Suitability
SME
Awardee Scale
Not specified

Common Procurement Vocabulary (CPV)

CPV Divisions

45 - Construction work


CPV Codes

45421000 - Joinery work

Notice Value(s)

Tender Value
£6,500,000 £1M-£10M
Lots Value
£6,500,000 £1M-£10M
Awards Value
Not specified
Contracts Value
Not specified

Notice Dates

Publication Date
10 Nov 20266 days ago
Submission Deadline
Not specified
Future Notice Date
18 Nov 20261 day to go
Award Date
Not specified
Contract Period
5 Apr 2027 - 14 Nov 2029 2-3 years
Recurrence
Not specified

Notice Status

Tender Status
Planned
Lots Status
Planned
Awards Status
Not Specified
Contracts Status
Not Specified

Buyer & Supplier

Contracting Authority (Buyer)

Main Buyer
The Mayor and Commonalty and Citizens of the City of London
Contact Name
Available with D3 Tenders Premium →
Contact Email
Available with D3 Tenders Premium →
Contact Phone
Available with D3 Tenders Premium →

Buyer Location

Locality
CITY OF LONDON
Postcode
EC2P 2EJ
Postcode Area
Central London
Country
England

Major Region (ITL 1)
TLI London
Basic Region (ITL 2)
TLI4 Inner London - East
Small Region (ITL 3)
TLI43 Haringey and Islington
Delivery Location
TLI London

Local Authority
Islington
Electoral Ward
Clerkenwell
Westminster Constituency
Islington South and Finsbury

Open Contracting Data Standard (OCDS)

View full OCDS Record for this contracting process

JSON Markdown

The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.

Loading OCDS record...