Notice Information
Notice Title
Supply, Install and Commission Equipment for Material Lab Expansion at AFRC
Notice Description
The University requires a Supplier to supply, install and commission the following equipment for the AFRC facility: - Cut off Saw - Metallographic Sample Grid and Polisher - Modular Extensions - Hot Mounting Press - Electronic Polisher / Etcher - Vibro Polisher The equipment will be installed at Advanced Forming Research Centre (AFRC), Inchinnan, Renfrew. Please note your interest for this requirement if you can provide all the equipment stated above.
Lot Information
Lot 1
The University requires a single supplier to supply, install and commission the following equipment for the AFRC facility: - Cut off Saw - Metallographic Sample Grind and Polisher - Hot Mounting Press - Electronic Polisher / Etcher - Vibro Polisher Cut Off Saw specification is as listed below: - 14" Cut off Saw for Metallographic specimen preparation - Samples must be able to be suitably clamped in the x, y and z directions - Samples able to be moved in the x, y and z directions once clamped in place. - Can cut samples of at least 135mm in diameter - Able to cut samples of at least 5Kg in weight - minimum - Variable feed rate - Variable disc speed - Pulsed cutting - Light in the chamber - Programmable cutting routines. Metallographic Sample Grind and Polisher specification is as listed below: -Semi-automatic programmable metallographic sample grind and polisher with dual working wheels. - Must have 2 off 300mm diameter working discs - Must include carousel for grinding and polishing moulds of the size 25mm, 32mm and 40mm diameter - Must have the option of single central force/pressure or individual sample force/pressure - Must have a water rinsing tap - Must be able to determine the amount of material removed with an accuracy of 0.01mm or better - Must include automatic dispensers - Must be able to vary the following parameters: Head rotation speed/ Base rotation speed/ Force/pressure on sample/ Water on/off - Must be able to store a minimum of 15 grinding /polishing programs Mounting Press specification is as listed below: - 2x Modular Opal X-press 2 additional (slave) hot mounting press units - Must be able to be attached to the Opal X-Press 2 (Master) Hot mounting press - One of the additional units must have a 25mm mould size - One of the additional units must have a 40mm mould size Electrolytic Polisher / Etcher specification is as listed below: - Vibration polisher for metallographic specimens - Must have variable vibration frequency. - Must have rim enclosure - Must include 6 off each sample holders for 25mm, 32mm and 40mm diameter moulds Supplier must install and commission all machines. Delivery shall be within three (3) to four (4) months with training and commissioning to be confirmed at a later date
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-r6ebe6-0000605748
- Publication Source
- Public Contracts Scotland
- Latest Notice
- https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=NOV373441
- Current Stage
- Planning
- All Stages
- Planning
Procurement Classification
- Notice Type
- OJEU - F1 - Prior Information Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Not Specified
- Procurement Method Details
- Not specified
- Tender Suitability
- Not specified
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
38 - Laboratory, optical and precision equipments (excl. glasses)
-
- CPV Codes
38000000 - Laboratory, optical and precision equipments (excl. glasses)
Notice Value(s)
- Tender Value
- £180,000 £100K-£500K
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 26 Nov 20196 years ago
- Submission Deadline
- Not specified
- Future Notice Date
- 9 Dec 2019Expired
- Award Date
- Not specified
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Planned
- Lots Status
- Planned
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- UNIVERSITY OF STRATHCLYDE
- Contact Name
- Not specified
- Contact Email
- kirstie.peffers@strath.ac.uk
- Contact Phone
- +44 1415482823
Buyer Location
- Locality
- GLASGOW
- Postcode
- G1 1QE
- Post Town
- Glasgow
- Country
- Scotland
-
- Major Region (ITL 1)
- TLM Scotland
- Basic Region (ITL 2)
- TLM3 West Central Scotland
- Small Region (ITL 3)
- TLM32 Glasgow City
- Delivery Location
- TLM82 Glasgow City
-
- Local Authority
- Glasgow City
- Electoral Ward
- Anderston/City/Yorkhill
- Westminster Constituency
- Glasgow North East
Further Information
Notice Documents
-
https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=NOV373441
Supply, Install and Commission Equipment for Material Lab Expansion at AFRC - The University requires a Supplier to supply, install and commission the following equipment for the AFRC facility: - Cut off Saw - Metallographic Sample Grid and Polisher - Modular Extensions - Hot Mounting Press - Electronic Polisher / Etcher - Vibro Polisher The equipment will be installed at Advanced Forming Research Centre (AFRC), Inchinnan, Renfrew. Please note your interest for this requirement if you can provide all the equipment stated above.
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-r6ebe6-0000605748-2019-11-26T00:00:00Z",
"date": "2019-11-26T00:00:00Z",
"ocid": "ocds-r6ebe6-0000605748",
"initiationType": "tender",
"parties": [
{
"id": "org-3",
"name": "University of Strathclyde",
"identifier": {
"legalName": "University of Strathclyde"
},
"address": {
"streetAddress": "40 George Street, Procurement Department",
"locality": "Glasgow",
"region": "UKM82",
"postalCode": "G1 1QE"
},
"contactPoint": {
"email": "kirstie.peffers@strath.ac.uk",
"telephone": "+44 1415482823",
"url": "http://"
},
"roles": [
"buyer"
],
"details": {
"classifications": [
{
"id": "Body governed by public law",
"scheme": "TED_CA_TYPE"
},
{
"id": "09",
"description": "Education",
"scheme": "COFOG"
}
],
"url": "http://www.strath.ac.uk/"
}
}
],
"buyer": {
"name": "University of Strathclyde",
"id": "org-3"
},
"planning": {
"documents": [
{
"id": "NOV373441",
"documentType": "plannedProcurementNotice",
"title": "Supply, Install and Commission Equipment for Material Lab Expansion at AFRC",
"description": "The University requires a Supplier to supply, install and commission the following equipment for the AFRC facility: - Cut off Saw - Metallographic Sample Grid and Polisher - Modular Extensions - Hot Mounting Press - Electronic Polisher / Etcher - Vibro Polisher The equipment will be installed at Advanced Forming Research Centre (AFRC), Inchinnan, Renfrew. Please note your interest for this requirement if you can provide all the equipment stated above.",
"url": "https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=NOV373441",
"format": "text/html"
}
]
},
"tender": {
"id": "UOS-14346-2019",
"title": "Supply, Install and Commission Equipment for Material Lab Expansion at AFRC",
"description": "The University requires a Supplier to supply, install and commission the following equipment for the AFRC facility: - Cut off Saw - Metallographic Sample Grid and Polisher - Modular Extensions - Hot Mounting Press - Electronic Polisher / Etcher - Vibro Polisher The equipment will be installed at Advanced Forming Research Centre (AFRC), Inchinnan, Renfrew. Please note your interest for this requirement if you can provide all the equipment stated above.",
"status": "planned",
"items": [
{
"id": "1",
"deliveryAddresses": [
{
"region": "UKM82"
}
],
"relatedLot": "1"
}
],
"value": {
"amount": 180000,
"currency": "GBP"
},
"mainProcurementCategory": "goods",
"lots": [
{
"id": "1",
"description": "The University requires a single supplier to supply, install and commission the following equipment for the AFRC facility: - Cut off Saw - Metallographic Sample Grind and Polisher - Hot Mounting Press - Electronic Polisher / Etcher - Vibro Polisher Cut Off Saw specification is as listed below: - 14\" Cut off Saw for Metallographic specimen preparation - Samples must be able to be suitably clamped in the x, y and z directions - Samples able to be moved in the x, y and z directions once clamped in place. - Can cut samples of at least 135mm in diameter - Able to cut samples of at least 5Kg in weight - minimum - Variable feed rate - Variable disc speed - Pulsed cutting - Light in the chamber - Programmable cutting routines. Metallographic Sample Grind and Polisher specification is as listed below: -Semi-automatic programmable metallographic sample grind and polisher with dual working wheels. - Must have 2 off 300mm diameter working discs - Must include carousel for grinding and polishing moulds of the size 25mm, 32mm and 40mm diameter - Must have the option of single central force/pressure or individual sample force/pressure - Must have a water rinsing tap - Must be able to determine the amount of material removed with an accuracy of 0.01mm or better - Must include automatic dispensers - Must be able to vary the following parameters: Head rotation speed/ Base rotation speed/ Force/pressure on sample/ Water on/off - Must be able to store a minimum of 15 grinding /polishing programs Mounting Press specification is as listed below: - 2x Modular Opal X-press 2 additional (slave) hot mounting press units - Must be able to be attached to the Opal X-Press 2 (Master) Hot mounting press - One of the additional units must have a 25mm mould size - One of the additional units must have a 40mm mould size Electrolytic Polisher / Etcher specification is as listed below: - Vibration polisher for metallographic specimens - Must have variable vibration frequency. - Must have rim enclosure - Must include 6 off each sample holders for 25mm, 32mm and 40mm diameter moulds Supplier must install and commission all machines. Delivery shall be within three (3) to four (4) months with training and commissioning to be confirmed at a later date",
"status": "planned"
}
],
"communication": {
"futureNoticeDate": "2019-12-09T00:00:00Z"
},
"coveredBy": [
"GPA"
],
"classification": {
"id": "38000000",
"scheme": "CPV"
},
"legalBasis": {
"id": "32014L0024",
"scheme": "CELEX"
}
},
"language": "EN",
"description": "NOTE: To register your interest in this notice and obtain any additional information please visit the Public Contracts Scotland Web Site at http://www.publiccontractsscotland.gov.uk/Search/Search_Switch.aspx?ID=605748. (SC Ref:605748)",
"links": [
{
"rel": "canonical",
"href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000605748"
}
],
"noticetype": "OJEU - F1 - Prior Information Notice"
}