Notice Information
Notice Title
2263a - Stainless Steel Support Structure
Notice Description
This tender is for a high-level requirements to design, fabrication and installation of pharmaceutical GMP equipment and Access Platforms for CPI's Medicines Innovation Centre (MMIC) project. The equipment and Access Platforms provide support and operational access for the process and powder formulation equipment within Clean Room 2 (0.34) at the MMIC building Paisley, Renfrewshire. The tender is split into 3 lots: Lot 1 - Equipment Platform Lot 2 - Material Hoist Lot 3 - Electrical Services and Containment. Please download the tender pack for more information.
Lot Information
Material Hoist
The Material Hoist shall be positioned on the right rear corner opposite the clean room material access door. The final position will depend on material access and the output of airflow modelling. The final position of the Material Hoist shall be included shall be included as part of the engineering package. Fabrication of the Material Hoist shall not commence until the vender submits the design drawings and calculations for acceptance by CPI. The Material Hoist load platform shall accommodate a 1200mm by 800mm pallet with a minimum load capacity of 500Kg. The vendor may propose alternative platform size and capacity to match commercially available equipment. The Material Hoist shall include hoisting platform, column runners, lifting arrangement and ramps to allow carts to be loaded onto and un-loaded from the platform. The platform surface shall be suitable for carts. The Material Hoist platform vertically swept operating volume shall be contained on all sides by a vertical safety cage. The Material Hoist and associated equipment and structures shall be GMP compliant. All the Material Hoist surfaces shall be smooth and wipeable. There shall be no ledges, crevices, recesses, or nooks that will entrap powders or allow powder to accumulate and are difficult to clean. All parts should be accessible and easy to clean.
Equipment PlatformThe Equipment Platform structure shall have four vertical columns. The spacing will provide a minimum clearance of 200mm to allow the tablet press to be moved in and out of position and to open its maintenance access doors. This clearance is also required to allow the operating envelope of the blender's robotic lifting arm. The aim shall be to accommodate a swivelling robotic arm which raises, lowers, and holds the blenders in operating position while being able to operate the equipment and move the tablet press in and out of position. The final Equipment Platform column spacings shall be included as part of the engineering package. The tablet presses are moved in and out of operating position such that the longest side enters the structure head on. The largest tablet press is 1800mm long and 1200mm wide. The press shall clear the process platform legs. After the tablet press is in operating position there shall be enough clearance to open the access doors for maintenance. Note the press is moved such that its wide side enters the structure head on. To accommodate these requirements the minimum column spacings shall be: The left to right upright support column spacing shall be a minimum of 2450mm apart. Note this dimension may need to be adjusted after modelling and final equipment configuration. The final dimensions shall be included as part of the engineering package. The front to rear support column spacing shall be a minimum of 2900mm apart. Note this dimension may need to be adjusted after modelling and final equipment configuration. The final dimensions shall be included as part of the engineering package. Any required horizontal reinforcement shall be between the side columns. Horizontal reinforcement shall not be placed between the front and rear columns. The Equipment Platform structure is required to be "stiff" and physically isolated from the Access Platform. The substructure of the module should have a 1st-order natural frequency at the mounting supports of >10Hz in the vertical plane and >2 Hz in horizontal plane. The vendor shall submit design calculations to confirm that the design complies with this requirement. The vendor shall provide details of how the performance will be tested and demonstrated during Factory and Site Acceptance Testing (FAT SAT).
Electrical Services and ContainmentPneumatic Line and Cable Containment.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-r6ebe6-0000697246
- Publication Source
- Public Contracts Scotland
- Latest Notice
- https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JUL454755
- Current Stage
- Award
- All Stages
- Tender, Award
Procurement Classification
- Notice Type
- PCS Notice - Website Contract Award Notice
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- SME
Common Procurement Vocabulary (CPV)
- CPV Divisions
45 - Construction work
-
- CPV Codes
45000000 - Construction work
Notice Value(s)
- Tender Value
- £177,897 £100K-£500K
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £177,897 £100K-£500K
Notice Dates
- Publication Date
- 26 Jul 20223 years ago
- Submission Deadline
- 24 Jun 2022Expired
- Future Notice Date
- Not specified
- Award Date
- 15 Jul 20223 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Active, Complete
- Awards Status
- Not Specified
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- CENTRE FOR PROCESS INNOVATION LIMITED
- Contact Name
- Not specified
- Contact Email
- e-tendering@uk-cpi.com
- Contact Phone
- +44 1642455340
Buyer Location
- Locality
- REDCAR
- Postcode
- TS10 4RF
- Post Town
- Cleveland
- Country
- England
-
- Major Region (ITL 1)
- TLC North East (England)
- Basic Region (ITL 2)
- TLC3 Tees Valley
- Small Region (ITL 3)
- TLC32 South Teesside
- Delivery Location
- Not specified
-
- Local Authority
- Redcar and Cleveland
- Electoral Ward
- Dormanstown
- Westminster Constituency
- Redcar
Further Information
Notice Documents
-
https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JUN451426
2263a - Stainless Steel Support Structure - This tender is for a high-level requirements to design, fabrication and installation of pharmaceutical GMP equipment and Access Platforms for CPI's Medicines Innovation Centre (MMIC) project. The equipment and Access Platforms provide support and operational access for the process and powder formulation equipment within Clean Room 2 (0.34) at the MMIC building Paisley, Renfrewshire. The tender is split into 3 lots: Lot 1 - Equipment Platform Lot 2 - Material Hoist Lot 3 - Electrical Services and Containment. Please download the tender pack for more information. -
https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JUL454755
2263a - Stainless Steel Support Structure - This tender is for a high-level requirements to design, fabrication and installation of pharmaceutical GMP equipment and Access Platforms for CPI's Medicines Innovation Centre (MMIC) project. The equipment and Access Platforms provide support and operational access for the process and powder formulation equipment within Clean Room 2 (0.34) at the MMIC building Paisley, Renfrewshire. The tender is split into 3 lots: Lot 1 - Equipment Platform Lot 2 - Material Hoist Lot 3 - Electrical Services and Containment. Please download the tender pack for more information.
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-r6ebe6-0000697246-2022-07-26T00:00:00Z",
"date": "2022-07-26T00:00:00Z",
"ocid": "ocds-r6ebe6-0000697246",
"initiationType": "tender",
"parties": [
{
"id": "org-1",
"name": "Centre for Process Innovation Limited",
"identifier": {
"legalName": "Centre for Process Innovation Limited"
},
"address": {
"streetAddress": "Wilton Centre",
"locality": "Redcar",
"region": "UK",
"postalCode": "TS10 4RF"
},
"contactPoint": {
"email": "e-tendering@uk-cpi.com",
"telephone": "+44 1642455340",
"url": "https://www.publiccontractsscotland.gov.uk/"
},
"roles": [
"buyer"
],
"details": {
"classifications": [
{
"id": "Body governed by public law",
"scheme": "TED_CA_TYPE"
},
{
"id": "Technology Development",
"scheme": "COFOG"
},
{
"id": "research and development",
"scheme": "COFOG"
}
],
"url": "http://www.uk-cpi.com"
}
},
{
"id": "org-102",
"name": "Glasgow Sheriff & Justice of the Peace Court",
"identifier": {
"legalName": "Glasgow Sheriff & Justice of the Peace Court"
},
"address": {
"streetAddress": "Sheriff Clerk's Office,",
"locality": "Glasgow",
"postalCode": "G5 9DA"
},
"contactPoint": {
"url": "http://"
},
"roles": [
"reviewBody"
]
},
{
"id": "org-65",
"name": "Centre for Process Innovation Limited",
"identifier": {
"legalName": "Centre for Process Innovation Limited"
},
"address": {
"streetAddress": "Wilton Centre",
"locality": "Redcar",
"region": "UK",
"postalCode": "TS10 4RF"
},
"contactPoint": {
"email": "e-tendering@uk-cpi.com",
"telephone": "+44 1642455340",
"url": "http://"
},
"roles": [
"buyer",
"centralPurchasingBody"
],
"details": {
"classifications": [
{
"id": "Body governed by public law",
"scheme": "TED_CA_TYPE"
},
{
"id": "research and development",
"scheme": "COFOG"
}
],
"url": "http://www.uk-cpi.com"
}
},
{
"id": "org-66",
"name": "Gow's Lybster Ltd",
"identifier": {
"legalName": "Gow's Lybster Ltd"
},
"address": {
"streetAddress": "Scaraben House, Hillhead, Lybster,, Caithness,",
"locality": "Lybster",
"region": "UK",
"postalCode": "KW3 6AS"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme",
"url": "http://"
}
},
{
"id": "org-67",
"name": "Glasgow Sheriff & Justice of the Peace Court",
"identifier": {
"legalName": "Glasgow Sheriff & Justice of the Peace Court"
},
"address": {
"streetAddress": "Sheriff Clerk's Office,",
"locality": "Glasgow",
"postalCode": "G5 9DA"
},
"contactPoint": {
"url": "http://"
},
"roles": [
"reviewBody"
]
}
],
"buyer": {
"name": "Centre for Process Innovation Limited",
"id": "org-65"
},
"tender": {
"id": "2263a",
"title": "2263a - Stainless Steel Support Structure",
"description": "This tender is for a high-level requirements to design, fabrication and installation of pharmaceutical GMP equipment and Access Platforms for CPI's Medicines Innovation Centre (MMIC) project. The equipment and Access Platforms provide support and operational access for the process and powder formulation equipment within Clean Room 2 (0.34) at the MMIC building Paisley, Renfrewshire. The tender is split into 3 lots: Lot 1 - Equipment Platform Lot 2 - Material Hoist Lot 3 - Electrical Services and Containment. Please download the tender pack for more information.",
"status": "complete",
"items": [
{
"id": "2",
"additionalClassifications": [
{
"id": "45000000",
"scheme": "CPV"
}
],
"deliveryAddresses": [
{
"region": "UK"
}
],
"relatedLot": "2"
},
{
"id": "1",
"additionalClassifications": [
{
"id": "45000000",
"scheme": "CPV"
}
],
"deliveryAddresses": [
{
"region": "UK"
},
{
"region": "UK"
}
],
"relatedLot": "1"
},
{
"id": "3",
"additionalClassifications": [
{
"id": "45000000",
"scheme": "CPV"
}
],
"deliveryAddresses": [
{
"region": "UK"
}
],
"relatedLot": "3"
}
],
"value": {
"amount": 177897,
"currency": "GBP"
},
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure",
"mainProcurementCategory": "works",
"submissionMethod": [
"electronicSubmission"
],
"submissionMethodDetails": "https://ne1procurementservices.com/content/live_tenders.php",
"tenderPeriod": {
"endDate": "2022-06-24T12:00:00Z"
},
"awardPeriod": {
"startDate": "2022-06-24T12:30:00Z"
},
"documents": [
{
"id": "JUN451426",
"documentType": "contractNotice",
"title": "2263a - Stainless Steel Support Structure",
"description": "This tender is for a high-level requirements to design, fabrication and installation of pharmaceutical GMP equipment and Access Platforms for CPI's Medicines Innovation Centre (MMIC) project. The equipment and Access Platforms provide support and operational access for the process and powder formulation equipment within Clean Room 2 (0.34) at the MMIC building Paisley, Renfrewshire. The tender is split into 3 lots: Lot 1 - Equipment Platform Lot 2 - Material Hoist Lot 3 - Electrical Services and Containment. Please download the tender pack for more information.",
"url": "https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JUN451426",
"format": "text/html"
},
{
"id": "JUL454755",
"documentType": "awardNotice",
"title": "2263a - Stainless Steel Support Structure",
"description": "This tender is for a high-level requirements to design, fabrication and installation of pharmaceutical GMP equipment and Access Platforms for CPI's Medicines Innovation Centre (MMIC) project. The equipment and Access Platforms provide support and operational access for the process and powder formulation equipment within Clean Room 2 (0.34) at the MMIC building Paisley, Renfrewshire. The tender is split into 3 lots: Lot 1 - Equipment Platform Lot 2 - Material Hoist Lot 3 - Electrical Services and Containment. Please download the tender pack for more information.",
"url": "https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JUL454755",
"format": "text/html"
}
],
"lots": [
{
"id": "2",
"title": "Material Hoist",
"description": "The Material Hoist shall be positioned on the right rear corner opposite the clean room material access door. The final position will depend on material access and the output of airflow modelling. The final position of the Material Hoist shall be included shall be included as part of the engineering package. Fabrication of the Material Hoist shall not commence until the vender submits the design drawings and calculations for acceptance by CPI. The Material Hoist load platform shall accommodate a 1200mm by 800mm pallet with a minimum load capacity of 500Kg. The vendor may propose alternative platform size and capacity to match commercially available equipment. The Material Hoist shall include hoisting platform, column runners, lifting arrangement and ramps to allow carts to be loaded onto and un-loaded from the platform. The platform surface shall be suitable for carts. The Material Hoist platform vertically swept operating volume shall be contained on all sides by a vertical safety cage. The Material Hoist and associated equipment and structures shall be GMP compliant. All the Material Hoist surfaces shall be smooth and wipeable. There shall be no ledges, crevices, recesses, or nooks that will entrap powders or allow powder to accumulate and are difficult to clean. All parts should be accessible and easy to clean.",
"status": "active",
"hasOptions": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"contractPeriod": {
"durationInDays": 720
},
"hasRenewal": false
},
{
"id": "1",
"title": "Equipment Platform",
"description": "The Equipment Platform structure shall have four vertical columns. The spacing will provide a minimum clearance of 200mm to allow the tablet press to be moved in and out of position and to open its maintenance access doors. This clearance is also required to allow the operating envelope of the blender's robotic lifting arm. The aim shall be to accommodate a swivelling robotic arm which raises, lowers, and holds the blenders in operating position while being able to operate the equipment and move the tablet press in and out of position. The final Equipment Platform column spacings shall be included as part of the engineering package. The tablet presses are moved in and out of operating position such that the longest side enters the structure head on. The largest tablet press is 1800mm long and 1200mm wide. The press shall clear the process platform legs. After the tablet press is in operating position there shall be enough clearance to open the access doors for maintenance. Note the press is moved such that its wide side enters the structure head on. To accommodate these requirements the minimum column spacings shall be: The left to right upright support column spacing shall be a minimum of 2450mm apart. Note this dimension may need to be adjusted after modelling and final equipment configuration. The final dimensions shall be included as part of the engineering package. The front to rear support column spacing shall be a minimum of 2900mm apart. Note this dimension may need to be adjusted after modelling and final equipment configuration. The final dimensions shall be included as part of the engineering package. Any required horizontal reinforcement shall be between the side columns. Horizontal reinforcement shall not be placed between the front and rear columns. The Equipment Platform structure is required to be \"stiff\" and physically isolated from the Access Platform. The substructure of the module should have a 1st-order natural frequency at the mounting supports of >10Hz in the vertical plane and >2 Hz in horizontal plane. The vendor shall submit design calculations to confirm that the design complies with this requirement. The vendor shall provide details of how the performance will be tested and demonstrated during Factory and Site Acceptance Testing (FAT SAT).",
"status": "complete",
"hasOptions": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"contractPeriod": {
"durationInDays": 720
},
"hasRenewal": false
},
{
"id": "3",
"title": "Electrical Services and Containment",
"description": "Pneumatic Line and Cable Containment.",
"status": "active",
"hasOptions": false,
"submissionTerms": {
"variantPolicy": "notAllowed"
},
"contractPeriod": {
"durationInDays": 720
},
"hasRenewal": false
}
],
"lotDetails": {
"maximumLotsBidPerSupplier": 2147483647
},
"bidOpening": {
"date": "2022-06-24T12:30:00Z"
},
"coveredBy": [
"GPA"
],
"submissionTerms": {
"languages": [
"en"
]
},
"classification": {
"id": "45000000",
"scheme": "CPV"
},
"hasRecurrence": false
},
"language": "EN",
"description": "(SC Ref:701416)",
"links": [
{
"rel": "canonical",
"href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000697246"
},
{
"rel": "canonical",
"href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000697246"
}
],
"noticetype": "PCS Notice - Website Contract Award Notice",
"awards": [
{
"id": "2263a-1",
"title": "Equipment Platform",
"suppliers": [
{
"id": "org-66",
"name": "Gow's Lybster Ltd"
}
],
"relatedLots": [
"1"
]
}
],
"contracts": [
{
"id": "2263a-1",
"awardID": "2263a-1",
"title": "Equipment Platform",
"status": "active",
"value": {
"amount": 177897,
"currency": "GBP"
},
"dateSigned": "2022-07-15T00:00:00Z"
}
],
"bids": {
"statistics": [
{
"id": "172",
"measure": "bids",
"value": 3,
"relatedLot": "1"
},
{
"id": "173",
"measure": "smeBids",
"value": 3,
"relatedLot": "1"
},
{
"id": "174",
"measure": "foreignBidsFromEU",
"value": 0,
"relatedLot": "1"
},
{
"id": "175",
"measure": "foreignBidsFromNonEU",
"value": 3,
"relatedLot": "1"
},
{
"id": "176",
"measure": "electronicBids",
"value": 3,
"relatedLot": "1"
}
]
}
}