Notice Information
Notice Title
Ardersier Port, Phase 2 - Quay Civils (300m)
Notice Description
Quayside Civils (These works are the focus of this PQQ) - Setting up principal contractor welfare area including all temporary service connections, - Breaking out and disposal of concrete guide walls following installation by quay wall contractor, - Removal of piling mat, installed by Others, - Cropping of diaphragm wall to cut off level. - Reinforced concrete capping beams, to both quay and anchor wall, with a design life of 100 years to tie in with the Phase 1 quay, Including the supply and installation of all quay furniture cast in elements. - Removal of existing sheet pile quay wall, anchor wall and tie rods. - Excavation to tie rod level, approximately +0.0mCD, including dewatering system to facilitate, - Installation of tie rods (free-issue) between quay and anchor walls, - Backfilling above tie rods to formation level using site-won material, - 100m wide quay apron along the entire length of the new quay including capping layer and unbound stone pavement, - 250kPa uniform loading capacity, - Finished level of +6.5mCD (varies depending on drainage falls), - Installation of temporary and permanents sheet piles, - Infiltration drainage system with trenches as required, - Quay furniture including flexible mooring and berthing equipment such as pneumatic fenders, removeable bollards, and safety equipment inclusive of all associated cast in items, - Instrumentation and monitoring equipment associated with the quay wall. - Upgrades to the existing quayside which extends east beyond the new Phase 2 300m diaphragm wall and apron by approximately 758m, whilst retaining the existing quay wall, to extend the usable quayside (dredged by others). There will be a requirement for the Contractor to coordinate elements of works with the Clients quay wall and landside civils principal contractors. There is potential for the works to be varied to extend the new quay wall and quay wall civils further than the initial 300m.
Lot Information
Lot 1
Procurement Stages Stage 1 - Early Market Consultation - Before commencing procurement, consult the market with a view to gauging project interest, informing of procurement plans and project requirements. Stage 2 - Pre-Qualification Questionnaire (PQQ) - Issue PQQ - Contractor submissions - Analyse and score submissions - Select shortlist of suppliers for Stage 3 Stage 3 - Invitation to Tender (ITT) / Competitive procedure with negotiation - Issue ITT - Hold structured meetings, discuss risk, technical queries and contract terms - Initial Contractor submissions - Analyse initial tender submissions - Negotiation period (assumptions, clarifications, exclusions, contract terms, etc.) - Final Contractor submissions - Evaluate and score final submissions - Select preferred bidder for Stage 4 Stage 4 - Contract Award - Notify Contractors of tender outcome - Stand still period - Contract finalisation and execution - Publish contract award notice
Renewal: Potential to be extended in relation to scope changes and/or in relation to future phases of work.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-r6ebe6-0000810397
- Publication Source
- Public Contracts Scotland
- Latest Notice
- https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=JAN547065
- Current Stage
- Tender
- All Stages
- Tender
Procurement Classification
- Notice Type
- OJEU - F14 - Corrigendum
- Procurement Type
- Standard
- Procurement Category
- Works
- Procurement Method
- Selective
- Procurement Method Details
- Competitive procedure with negotiation
- Tender Suitability
- Not specified
- Awardee Scale
- Not specified
Common Procurement Vocabulary (CPV)
- CPV Divisions
-
- CPV Codes
45000000 - Construction work
Notice Value(s)
- Tender Value
- £23,000,000 £10M-£100M
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- Not specified
Notice Dates
- Publication Date
- 13 Jan 20267 months ago
- Submission Deadline
- 16 Jan 2026Expired
- Future Notice Date
- Not specified
- Award Date
- Not specified
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Active
- Lots Status
- Active
- Awards Status
- Not Specified
- Contracts Status
- Not Specified
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- Ardersier Port (Scotland) Limited
- Contact Name
- Available with D3 Tenders Premium →
- Contact Email
- Available with D3 Tenders Premium →
- Contact Phone
- Available with D3 Tenders Premium →
Buyer Location
- Locality
- INVERNESS
- Postcode
- IV2 7QX
- Postcode Area
- Inverness
- Country
- Scotland
-
- Major Region (ITL 1)
- TLM Scotland
- Basic Region (ITL 2)
- TLM2 Highlands and Islands
- Small Region (ITL 3)
- TLM20 Highlands and Islands
- Delivery Location
- TLM62 Inverness and Nairn, Moray, and Badenoch and Strathspey
-
- Local Authority
- Highland
- Electoral Ward
- Culloden and Ardersier
- Westminster Constituency
- Moray West, Nairn and Strathspey
Further Information
Notice Documents
-
https://www.publiccontractsscotland.gov.uk/NoticeDownload/DownloadDocument.aspx?id=DEC544858&idx=3
3rd December 2025 - App B - NDA -
https://www.publiccontractsscotland.gov.uk/NoticeDownload/DownloadDocument.aspx?id=DEC544858&idx=4
3rd December 2025 - App C - HSEQ Questionnaire -
https://www.publiccontractsscotland.gov.uk/NoticeDownload/DownloadDocument.aspx?id=DEC544858&idx=2
3rd December 2025 - App A - Drawings & Info -
https://www.publiccontractsscotland.gov.uk/NoticeDownload/DownloadDocument.aspx?id=DEC544858&idx=1
3rd December 2025 - APP2-HAV-ZZ-QUA-PQ-K-000001 - Quay Civils (300m) - PQQ R3 -
https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=DEC544858
Ardersier Port, Phase 2 - Quay Civils (300m) - Quayside Civils (These works are the focus of this PQQ) - Setting up principal contractor welfare area including all temporary service connections, - Breaking out and disposal of concrete guide walls following installation by quay wall contractor, - Removal of piling mat, installed by Others, - Cropping of diaphragm wall to cut off level. - Reinforced concrete capping beams, to both quay and anchor wall, with a design life of 100 years to tie in with the Phase 1 quay, Including the supply and installation of all quay furniture cast in elements. - Removal of existing sheet pile quay wall, anchor wall and tie rods. - Excavation to tie rod level, approximately +0.0mCD, including dewatering system to facilitate, - Installation of tie rods (free-issue) between quay and anchor walls, - Backfilling above tie rods to formation level using site-won material, - 100m wide quay apron along the entire length of the new quay including capping layer and unbound stone pavement, - 250kPa uniform loading capacity, - Finished level of +6.5mCD (varies depending on drainage falls), - Installation of temporary and permanents sheet piles, - Infiltration drainage system with trenches as required, - Quay furniture including flexible mooring and berthing equipment such as pneumatic fenders, removeable bollards, and safety equipment inclusive of all associated cast in items, - Instrumentation and monitoring equipment associated with the quay wall. - Upgrades to the existing quayside which extends east beyond the new Phase 2 300m diaphragm wall and apron by approximately 758m, whilst retaining the existing quay wall, to extend the usable quayside (dredged by others). There will be a requirement for the Contractor to coordinate elements of works with the Clients quay wall and landside civils principal contractors. There is potential for the works to be varied to extend the new quay wall and quay wall civils further than the initial 300m.
Notice URLs
Open Contracting Data Standard (OCDS)
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.