Trans Health Service in Sefton

Description: Trans health Sefton is a GP led support service that offers a single access point that provides: * Care co-ordination from a GP with special interest in TGNB care. * Initial and longer-term drug administration, prescribing and monitoring service * Referral to and liaison with support Service agencies * Closer working with Regional GICs to enable a smooth patient process between services. * Referral to endocrinologist to initiate and advise on medical management and bridging hormones. * Speech and Language Therapy (SALT) in liaison with NHS England * Hair removal in liaison with NHS England * Referral to fertility services and screening programmes. * Support to fellow Sefton GPs who wish to continue prescribing and supporting their own patients.

Summary: NHS Cheshire and Merseyside ICB has formally awarded a contract for the provision of Trans Health Services in Sefton. This service falls under the health services industry category, with a focus on providing a GP-led support system for transgender and non-binary patients. The procurement was completed under the Provider Selection Regime (PSR), specifically through the Direct Award C process, bypassing the Public Contracts Regulations 2015. The contract commenced on 2nd December 2025 and will continue until 31st March 2026, with a total contract value of £10,000. The services will be delivered within the Sefton area, targeting patients registered with a Sefton Place GP.

PRO004864 - Goods - Dynamic Market - Biodiversity Net Gain

Description: To ensure compliance with the Environment Act and planning regulations, United Utilities needs to procure Biodiversity Net Gain (BNG) units. These units represent certified ecological enhancements that offset habitat loss caused by development activities. Securing these units is essential for meeting statutory obligations, avoiding project delays, and maintaining our organisation's reputation for environmental responsibility. The scope includes sourcing government registered BNG units from approved providers to deliver measurable biodiversity improvements in line with legal and sustainability commitments. This purchase supports our strategic objectives by enabling project delivery without risk of non-compliance for Biodiversity Net Gain.

Summary: United Utilities Water Limited is the buying organisation for the procurement titled "PRO004864 - Goods - Dynamic Market - Biodiversity Net Gain" with tender ID 085503-2025. This open procurement process focuses on the goods industry category, particularly in land management and agricultural services, and aims to secure Biodiversity Net Gain (BNG) units to comply with the Environment Act and planning regulations. Located in the United Kingdom, the procurement is currently active, with the process initiated on 22nd December 2025. The procurement method is dynamic market, signifying an open engagement for interested parties. The framework agreement associated with this tender will commence on 24th February 2026 and will last until 23rd December 2034.

Enabling Innovation Framework 5

Description: Enabling Innovation Framework 5 The EIF 5 Scope is primarily around problem definition and framing, studies, developing functional requirements, preparing business cases and interventions for which the categories, outputs and deliverables. The Sellafield Ltd Corporate Strategy and Strategy Management Framework provide broader organisational context and detail around the purpose and challenges of the value streams (Retrievals, Remediation, Spent Fuel Management, Special Nuclear Materials and Integrated Waste Management) and the business critical enablers. In summary the scope of the EIF encompasses: * Support to problem framing: establishing clarity over needs and priorities and providing technical / digital support; * Help in establishing project purpose, principles, roles and tasks before the Detail is decided * Problem definition: help in translating service requirements into clear functional / technical / digital requirements; (read more...)

Summary: Sellafield Limited, a sub-central public authority in the United Kingdom, is planning the "Enabling Innovation Framework 5" contract, focusing on engineering and technical services. This procurement process, currently in the planning stage, is set to reach the tender stage by 5 January 2026, with an anticipated start date for the contract by 30 June 2026. The framework, valued at up to £24,000,000 (including VAT), will last for four years and cover various functions such as problem definition, project management, and digital service support across multiple sites in the UK.

(Dec 25) Transferring Care for 3 individuals with a Learning Disability and/or are autistic who display behaviours that challenge, including those with a mental health condition into Nixon Street-NHS Cheshire & Merseyside ICB

Description: NHS Midlands and Lancashire Commissioning Support Unit are working as an agent on behalf of NHS Cheshire & Merseyside Integrated Care Board (ICB) who are looking to undertake a procurement for the provision of transferring care for 3 individuals with a learning disability and/or are autistic who display behaviours that challenge, including those with a mental health condition into Nixon Street for patients from Cheshire East Place. This Procurement is to identify a provider to provide care and support services for those individuals who have been identified for the Nixon Street property. initially Nixon Street capital was secured for Cheshire East individuals with a Learning Disability and/or autistic people with behaviours that challenge due to Cheshire East having no suitable accommodation adapted for people with autism and challenging (read more...)

Summary: The NHS Cheshire & Merseyside Integrated Care Board (ICB) is currently in the tender stage of their procurement process for a project titled "(Dec 25) Transferring Care for 3 individuals with a Learning Disability and/or are autistic who display behaviours that challenge, including those with a mental health condition into Nixon Street." The services fall under the industry category of Health services and are specifically aimed at supporting individuals in the Cheshire area. This procurement seeks a provider capable of delivering care and support services in a newly renovated facility located in Macclesfield, which is strategically positioned close to essential health services. The deadline for tender submissions has been updated to Tuesday 20th January 2026 at 12:00pm, with the service expected to commence on 27th April 2026. This contract, valued at up to £6,119,704, will initially run for three years with the possibility of a two-year extension. The procurement method is an open procedure, operating under the Health Care Services (Provider Selection Regime) Regulations 2023.

Priestley College Gym Equipment

Description: Equipment & Quantity Stepper 1 Treadmill 2 Upright Cycle 1 Cross Trainer / Elliptical Machine 2 Recumbent Cycle 1 Resistance wall for up to 10 users in the region of l6.35m x w1.5m x h2.5m to include: 1 1 x 2m Pull-Up Bar, 1 storage bay, 1 x flywheel 1 x half rack (including 1 pair safety bars, 1 pair multi-grip dip handles, 8 x storage pins, 1 x barbell holder, 1 pair J-hooks) Also to include: 2 x 50kg weight stack and Power mode 1 pair short and long handles 1x ankle strap 1x step Complete Set Power Band Resistance 1 Rope 2 Set of Hexagon Dumbbells including 8 pairs 5-22.5Kg 1 Set of heavy Kettlebells including 5 pairs 8-24Kg 1 Kettlebell 4kg 2 Hexagon Dumbbell 12.5Kg (read more...)

Summary: The Challenge Academy Trust based in Warrington, United Kingdom, is inviting tenders for gym equipment for Priestley College. This procurement process pertains to the industry category of gymnasium and fitness equipment. It is currently at the tender stage, with a focus on acquiring various gym apparatus including treadmills, cycles, dumbbells, and resistance equipment. The tender is conducted under an open competition procurement method, specifically targeting below-threshold contracts. Interested parties should note that the deadline for submission is set for 16th January 2026, with the enquiry period closing on 9th January 2026. Deliveries are expected across multiple regions in the UK, and the total estimated contract value is £50,000 GBP. Contract performance is slated to begin on 19th January 2026, concluding by 31st January 2026.

Technical Consultancy Services Framework

Description: Established in 2004, Procurement for Housing (PfH) is a national procurement consortium dedicated to the social housing sector and supported by the National Housing Federation (NHF), Chartered Institute of Housing (CIH) and HouseMark. Collectively, our Members manage more than 90% of UK' social housing stock, with PfH helping them to achieve efficiency savings using a wide range of services including framework agreements, dynamic purchasing systems, spend analyses, strategy reviews, consolidated billing and comprehensive reporting. PfH is a contracting authority under section 2 of the Procurement Act 2023 and a centralised procurement authority under section 1(4) of that Act. Please refer to www.pfh.co.uk for additional information. PfH is administered by Inprova Limited and is headquartered in the North West of England, with over 20 years of expertise and experience (read more...)

Summary: The public procurement process is being conducted by Procurement for Housing (PfH), a national procurement consortium headquartered in Birchwood, Warrington. The current stage of the process is planning, focusing on the establishment of a national Technical Consultancy Services Framework. This framework aims to cover various services, including Project Management, Mechanical & Electrical Engineering, Architectural Services, and others across the United Kingdom. Preliminary market engagement is scheduled with supplier sessions planned for February and March 2026, and the closing date for expressing interest is 27th February 2026. Interested parties can submit their interest via email to participate in these sessions. The framework, planned to start on 1st August 2026, will extend until 31st July 2030, with a total estimated procurement value of £120 million. Details about the lots will be defined in the future Tender Notice.

(Dec 25) Transferring Care for 3 individuals with a Learning Disability and/or are autistic who display behaviours that challenge, including those with a mental health condition into Nixon Street-NHS Cheshire & Merseyside ICB

Description: NHS Midlands and Lancashire Commissioning Support Unit are working as an agent on behalf of NHS Cheshire & Merseyside Integrated Care Board (ICB) who are looking to undertake a procurement for the provision of transferring care for 3 individuals with a learning disability and/or are autistic who display behaviours that challenge, including those with a mental health condition into Nixon Street for patients from Cheshire East Place. This Procurement is to identify a provider to provide care and support services for those individuals who have been identified for the Nixon Street property. initially Nixon Street capital was secured for Cheshire East individuals with a Learning Disability and/or autistic people with behaviours that challenge due to Cheshire East having no suitable accommodation adapted for people with autism and challenging (read more...)

Summary: The NHS Cheshire & Merseyside Integrated Care Board (ICB) is currently in the tender stage of their procurement process for a project titled "(Dec 25) Transferring Care for 3 individuals with a Learning Disability and/or are autistic who display behaviours that challenge, including those with a mental health condition into Nixon Street." The services fall under the industry category of Health services and are specifically aimed at supporting individuals in the Cheshire area. This procurement seeks a provider capable of delivering care and support services in a newly renovated facility located in Macclesfield, which is strategically positioned close to essential health services. The deadline for tender submissions has been updated to Tuesday 20th January 2026 at 12:00pm, with the service expected to commence on 27th April 2026. This contract, valued at up to £6,119,704, will initially run for three years with the possibility of a two-year extension. The procurement method is an open procedure, operating under the Health Care Services (Provider Selection Regime) Regulations 2023.

Priestley College Gym Equipment

Description: Equipment & Quantity Stepper 1 Treadmill 2 Upright Cycle 1 Cross Trainer / Elliptical Machine 2 Recumbent Cycle 1 Resistance wall for up to 10 users in the region of l6.35m x w1.5m x h2.5m to include: 1 1 x 2m Pull-Up Bar, 1 storage bay, 1 x flywheel 1 x half rack (including 1 pair safety bars, 1 pair multi-grip dip handles, 8 x storage pins, 1 x barbell holder, 1 pair J-hooks) Also to include: 2 x 50kg weight stack and Power mode 1 pair short and long handles 1x ankle strap 1x step Complete Set Power Band Resistance 1 Rope 2 Set of Hexagon Dumbbells including 8 pairs 5-22.5Kg 1 Set of heavy Kettlebells including 5 pairs 8-24Kg 1 Kettlebell 4kg 2 Hexagon Dumbbell 12.5Kg (read more...)

Summary: The Challenge Academy Trust based in Warrington, United Kingdom, is inviting tenders for gym equipment for Priestley College. This procurement process pertains to the industry category of gymnasium and fitness equipment. It is currently at the tender stage, with a focus on acquiring various gym apparatus including treadmills, cycles, dumbbells, and resistance equipment. The tender is conducted under an open competition procurement method, specifically targeting below-threshold contracts. Interested parties should note that the deadline for submission is set for 16th January 2026, with the enquiry period closing on 9th January 2026. Deliveries are expected across multiple regions in the UK, and the total estimated contract value is £50,000 GBP. Contract performance is slated to begin on 19th January 2026, concluding by 31st January 2026.

3D Printing Services

Description: United Utilities are looking to engage the market to understand who has capabilities of providing 3D printing services (Concrete, Plastic, Metal etc), how these are applicable and what the benefits could be.

Summary: United Utilities Water Limited is initiating a procurement process for the provision of 3D Printing Services, covering a range of materials such as concrete, plastic, and metal. The tender, predominantly aimed at the services sector, is in the planning stage with a focus on market engagement to understand existing capabilities and benefits. Interested businesses are encouraged to engage by the deadline of 13th February 2026 for market research queries. The procurement process is structured under the utilities special regime and falls within the geographical location of the United Kingdom, specifically the regions UKC to UKK.

3D Printing Services

Description: United Utilities are looking to engage the market to understand who has capabilities of providing 3D printing services, how these are applicable and what the benefits could be.

Summary: United Utilities Water Limited is initiating a procurement process for the provision of 3D Printing Services, covering a range of materials such as concrete, plastic, and metal. The tender, predominantly aimed at the services sector, is in the planning stage with a focus on market engagement to understand existing capabilities and benefits. Interested businesses are encouraged to engage by the deadline of 13th February 2026 for market research queries. The procurement process is structured under the utilities special regime and falls within the geographical location of the United Kingdom, specifically the regions UKC to UKK.