Notice Information
Notice Title
Procurement of Post Design Services, Spares and repairs for Helmets, Ground Use Headsets, in Ear Communication Devices and Test Equipment for use on air platforms.
Notice Description
Single Source procurement of Post Design Services, Spares and repairs for Helmets, Ground Use Headsets, In Ear Communication Devices (IECDs) and Test Equipment for use on air platforms. The Contract will be for a maximum of 8 years. The estimated value is PS32.1M.
Lot Information
Lot 1
The Air Commodities Delivery Team (ACDT) within Defence Equipment & Support (DE&S), part of the UK Ministry of Defence, ("the Authority") intends to award a Contract to Helmet Integrated Systems Ltd for the procurement of Post Design Services, Spares and repairs for Helmets, Ground Use Headsets, In Ear Communication Devices (IECDs) and Test Equipment for use on air platforms. The current contract for Post Design Services, Spares and Repairs of Helmets and In-Ear Communication Devices (IECDs) will expire on 31 December 2024. There is an ongoing requirement to continue to support this equipment until 2032, which will comprise of five (5) year contract with three (3) option years of twelve months each at an estimated value of PS31.2M. In accordance with regulation 4 of The Defence and Security Public Contracts (Amendment) (EU Exit) Regulations 2019 (SI 2019/697) this procurement falls to be regulated under the provisions of the Defence and Security Public Contracts Regulations 2011 as amended (in particular by SI 2019/697 and SI 2020/1450). Prior publication of a contract notice in the Official Journal of the European Union is no longer appropriate. It is considered that the award of the contract without prior publication of a contract notice in the UK e-notification service (in accordance with the relevant legislation) is lawful in accordance with regulation 16(1)(a)(ii) of the Defence and Security Public Contracts Regulations 2011 for technical reasons. The Authority has insufficient intellectual property rights to the modifications to the equipment and is therefore unable to pass the necessary data and information to undertake the requirement to third parties. Only the extant Contractor is the approved Design Organisation (DO) for the articles and owns the Design Rights for the articles which fulfil the requirement. This technical expertise, together with the ownership of the Design Rights, means that no company other than Helmet Integrated Systems Ltd can carry out the activities required in the time frame specified by the Customer. Helmet Integrated Systems Ltd hold the necessary Design Approved Organisation Scheme accreditation to meet Airworthiness requirements with Military Aviation Authority (MAA) regulations ensuring continued support of this equipment to the required safely levels.
Procurement Information
In accordance with regulation 4 of The Defence and Security Public Contracts (Amendment) (EU Exit) Regulations 2019 (SI 2019/697) this procurement falls to be regulated under the provisions of the Defence and Security Public Contracts Regulations 2011 as amended (in particular by SI 2019/697 and SI 2020/1450). Prior publication of a contract notice in the Official Journal of the European Union is no longer appropriate. It is considered that the award of the contract without prior publication of a contract notice in the UK e-notification service (in accordance with the relevant legislation) is lawful in accordance with regulation 16(1)(a)(ii) of the Defence and Security Public Contracts Regulations 2011 for technical reasons. The Authority has insufficient intellectual property rights to the modifications to the equipment and is therefore unable to pass the necessary data and information to undertake the requirement to third parties. Only the extant Contractor is the approved Design Organisation (DO) for the articles and owns the Design Rights for the articles which fulfil the requirement. This technical expertise, together with the ownership of the Design Rights, means that no company other than Gentex, can carry out the activities required in the time frame specified by the Customer. Helmet Integrated Systems Ltd hold the necessary Design Approved Organisation Scheme accreditation to meet Airworthiness requirements with Military Aviation Authority (MAA) regulations ensuring continued support of this equipment to the required safely levels.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-h6vhtk-04c0f0
- Publication Source
- Find A Tender Service
- Latest Notice
- https://www.find-tender.service.gov.uk/Notice/038517-2024
- Current Stage
- Award
- All Stages
- Award
Procurement Classification
- Notice Type
- Award Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Limited
- Procurement Method Details
- Negotiated without publication of a contract notice
- Tender Suitability
- Not specified
- Awardee Scale
- Large
Common Procurement Vocabulary (CPV)
- CPV Divisions
32 - Radio, television, communication, telecommunication and related equipment
35 - Security, fire-fighting, police and defence equipment
-
- CPV Codes
32342300 - Microphones and speaker sets
35813000 - Military helmets
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £32,100,000 £10M-£100M
Notice Dates
- Publication Date
- 28 Nov 20241 years ago
- Submission Deadline
- Not specified
- Future Notice Date
- Not specified
- Award Date
- 1 Nov 20241 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Not Specified
- Awards Status
- Active
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- MINISTRY OF DEFENCE
- Contact Name
- Not specified
- Contact Email
- angela.organ102@mod.gov.uk
- Contact Phone
- Not specified
Buyer Location
- Locality
- BRISTOL
- Postcode
- N/A
- Post Town
- Not specified
- Country
- Not specified
-
- Major Region (ITL 1)
- Not specified
- Basic Region (ITL 2)
- Not specified
- Small Region (ITL 3)
- Not specified
- Delivery Location
- Not specified
-
- Local Authority
- Not specified
- Electoral Ward
- Not specified
- Westminster Constituency
- Not specified
Further Information
Notice URLs
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-h6vhtk-04c0f0-2024-11-28T17:56:03Z",
"date": "2024-11-28T17:56:03Z",
"ocid": "ocds-h6vhtk-04c0f0",
"initiationType": "tender",
"tender": {
"id": "ocds-h6vhtk-04c0f0",
"legalBasis": {
"id": "32009L0081",
"scheme": "CELEX"
},
"title": "Procurement of Post Design Services, Spares and repairs for Helmets, Ground Use Headsets, in Ear Communication Devices and Test Equipment for use on air platforms.",
"status": "complete",
"classification": {
"scheme": "CPV",
"id": "35813000",
"description": "Military helmets"
},
"mainProcurementCategory": "goods",
"description": "Single Source procurement of Post Design Services, Spares and repairs for Helmets, Ground Use Headsets, In Ear Communication Devices (IECDs) and Test Equipment for use on air platforms. The Contract will be for a maximum of 8 years. The estimated value is PS32.1M.",
"lots": [
{
"id": "1",
"description": "The Air Commodities Delivery Team (ACDT) within Defence Equipment & Support (DE&S), part of the UK Ministry of Defence, (\"the Authority\") intends to award a Contract to Helmet Integrated Systems Ltd for the procurement of Post Design Services, Spares and repairs for Helmets, Ground Use Headsets, In Ear Communication Devices (IECDs) and Test Equipment for use on air platforms. The current contract for Post Design Services, Spares and Repairs of Helmets and In-Ear Communication Devices (IECDs) will expire on 31 December 2024. There is an ongoing requirement to continue to support this equipment until 2032, which will comprise of five (5) year contract with three (3) option years of twelve months each at an estimated value of PS31.2M. In accordance with regulation 4 of The Defence and Security Public Contracts (Amendment) (EU Exit) Regulations 2019 (SI 2019/697) this procurement falls to be regulated under the provisions of the Defence and Security Public Contracts Regulations 2011 as amended (in particular by SI 2019/697 and SI 2020/1450). Prior publication of a contract notice in the Official Journal of the European Union is no longer appropriate. It is considered that the award of the contract without prior publication of a contract notice in the UK e-notification service (in accordance with the relevant legislation) is lawful in accordance with regulation 16(1)(a)(ii) of the Defence and Security Public Contracts Regulations 2011 for technical reasons. The Authority has insufficient intellectual property rights to the modifications to the equipment and is therefore unable to pass the necessary data and information to undertake the requirement to third parties. Only the extant Contractor is the approved Design Organisation (DO) for the articles and owns the Design Rights for the articles which fulfil the requirement. This technical expertise, together with the ownership of the Design Rights, means that no company other than Helmet Integrated Systems Ltd can carry out the activities required in the time frame specified by the Customer. Helmet Integrated Systems Ltd hold the necessary Design Approved Organisation Scheme accreditation to meet Airworthiness requirements with Military Aviation Authority (MAA) regulations ensuring continued support of this equipment to the required safely levels.",
"awardCriteria": {
"criteria": [
{
"type": "price",
"name": "Lowest price"
}
]
},
"hasOptions": false
}
],
"items": [
{
"id": "1",
"additionalClassifications": [
{
"scheme": "CPV",
"id": "32342300",
"description": "Microphones and speaker sets"
}
],
"deliveryAddresses": [
{
"region": "UK"
}
],
"relatedLot": "1"
}
],
"procurementMethod": "limited",
"procurementMethodDetails": "Negotiated without publication of a contract notice",
"coveredBy": [
"GPA"
],
"procurementMethodRationaleClassifications": [
{
"scheme": "TED_PT_AWARD_CONTRACT_WITHOUT_CALL",
"id": "D_PROC_NEGOTIATED_PRIOR_CALL_COMPETITION",
"description": "No tenders or no suitable tenders/requests to participate in response to negotiated procedure with prior publication of a contract notice"
},
{
"scheme": "TED_PT_AWARD_CONTRACT_WITHOUT_CALL",
"id": "D_MANUF_FOR_RESEARCH",
"description": "The products involved are manufactured purely for the purpose of research, experiment, study or development under the conditions stated in the directive"
},
{
"scheme": "TED_PT_AWARD_CONTRACT_WITHOUT_CALL",
"id": "D_TECHNICAL",
"description": "The works, supplies or services can be provided only by a particular economic operator due to absence of competition for technical reasons"
}
],
"procurementMethodRationale": "In accordance with regulation 4 of The Defence and Security Public Contracts (Amendment) (EU Exit) Regulations 2019 (SI 2019/697) this procurement falls to be regulated under the provisions of the Defence and Security Public Contracts Regulations 2011 as amended (in particular by SI 2019/697 and SI 2020/1450). Prior publication of a contract notice in the Official Journal of the European Union is no longer appropriate. It is considered that the award of the contract without prior publication of a contract notice in the UK e-notification service (in accordance with the relevant legislation) is lawful in accordance with regulation 16(1)(a)(ii) of the Defence and Security Public Contracts Regulations 2011 for technical reasons. The Authority has insufficient intellectual property rights to the modifications to the equipment and is therefore unable to pass the necessary data and information to undertake the requirement to third parties. Only the extant Contractor is the approved Design Organisation (DO) for the articles and owns the Design Rights for the articles which fulfil the requirement. This technical expertise, together with the ownership of the Design Rights, means that no company other than Gentex, can carry out the activities required in the time frame specified by the Customer. Helmet Integrated Systems Ltd hold the necessary Design Approved Organisation Scheme accreditation to meet Airworthiness requirements with Military Aviation Authority (MAA) regulations ensuring continued support of this equipment to the required safely levels."
},
"awards": [
{
"id": "038517-2024-700005439 & ACCOMM4/7132-1",
"relatedLots": [
"1"
],
"title": "Procurement of Post Design Services, Spares and repairs for Helmets, Ground Use Headsets, In Ear Communication Devices and Test Equipment for use on air platforms.",
"status": "active",
"hasSubcontracting": true,
"suppliers": [
{
"id": "GB-FTS-131565",
"name": "HELMET INTEGRATED SYSTEMS LTD"
}
]
}
],
"parties": [
{
"id": "GB-FTS-5483",
"name": "Ministry of Defence",
"identifier": {
"legalName": "Ministry of Defence"
},
"address": {
"locality": "Bristol",
"region": "UK",
"countryName": "United Kingdom"
},
"contactPoint": {
"email": "angela.organ102@mod.gov.uk"
},
"roles": [
"buyer",
"reviewBody"
],
"details": {
"url": "http://www.contracts.mod.uk",
"classifications": [
{
"scheme": "TED_CA_TYPE",
"id": "MINISTRY",
"description": "Ministry or any other national or federal authority, including their regional or local subdivisions"
},
{
"scheme": "COFOG",
"id": "02",
"description": "Defence"
}
]
}
},
{
"id": "GB-FTS-131565",
"name": "HELMET INTEGRATED SYSTEMS LTD",
"identifier": {
"legalName": "HELMET INTEGRATED SYSTEMS LTD"
},
"address": {
"locality": "Letchworth Garden City",
"region": "UK",
"countryName": "United Kingdom"
},
"roles": [
"supplier"
],
"details": {
"scale": "large"
}
}
],
"buyer": {
"id": "GB-FTS-5483",
"name": "Ministry of Defence"
},
"contracts": [
{
"id": "038517-2024-700005439 & ACCOMM4/7132-1",
"awardID": "038517-2024-700005439 & ACCOMM4/7132-1",
"title": "Procurement of Post Design Services, Spares and repairs for Helmets, Ground Use Headsets, In Ear Communication Devices and Test Equipment for use on air platforms.",
"status": "active",
"value": {
"amount": 32100000,
"currency": "GBP"
},
"dateSigned": "2024-11-01T00:00:00Z"
}
],
"language": "en"
}