This public procurement record has 1 release in its history.

Award

30 Oct 2026 at 10:58

Summary of the contracting process

Defence Equipment and Support is procuring continued through-life support, maintenance and repair for the British Army’s in-service Accuracy International sniper rifles: the L115A3, L115A4, L118A2 and L121A2. The requirement also covers additional rifles and associated ancillaries as needed to maintain the total fleet and meet operational requirements. This is a combined supply and firearms support requirement, including rifle provision and repair and maintenance services (CPV 50620000). The equipment and support sustain the existing assured sniper-rifle capability during its remaining service life. The buyer is Defence Equipment and Support, acting for the Ministry of Defence. The procurement identifies one lot; no delivery location is stated.

The procurement is complete and the contract has been awarded to Accuracy International Limited. The award is recorded as pending. The buyer used a direct award without prior competition, citing the supplier’s status as original equipment manufacturer and design authority, access to proprietary technical data and specialist expertise, and the need for compatible additional rifles. The stated evaluation basis is technical reasons and additional or repeat goods and services. The contract period runs from 5 January 2027 to 31 March 2031. The estimated award value is £500,000 gross; this is a maximum for potential orders, not guaranteed spending, and the buyer may place no orders. The process comprises one lot, and small and medium-sized enterprises are identified as suitable. The planned contract signature date is 11 December 2026.

For suppliers assessing future work for Defence Equipment and Support, this award shows demand for sustaining the existing Accuracy International sniper-rifle fleet, maintaining its assured configuration and supplying compatible additional rifles and ancillaries. A credible competitor would need the original equipment manufacturer’s technical data and design knowledge, specialist tooling, engineering expertise and configuration control, alongside the capacity to maintain, repair and supply the rifles. The buyer’s stated rationale is that transferring support would require extensive verification, safety assurance and configuration management, while alternative platforms would add separate training, support and logistics burdens. This points to a strong incumbent-specific requirement rather than an open market for interchangeable rifle systems. The buyer says it will reassess its requirement when the current rifles reach their planned out-of-service dates, with competition among possible future strategies.

How relevant is this notice?

Notice Information

Notice Title

715890484 Accuracy International Enabling Contract (EC)

Notice Description

Description of Procurement The Ministry of Defence (MOD) ("the Authority") intends to award a contract to Accuracy International Ltd for the continued through-life support, maintenance and repair of the in-service sniper rifle capability (L115A3, L115A4, L118A2 and L121A2), together with the provision of additional sniper rifles as required during the contract period. The previous Accuracy International Ltd combined contract this contract is replacing was awarded on a single source basis under the Defence and Security Public Contracts Regulations (DSPCR). Accuracy International Ltd are the Original Equipment Manufacturer (OEM) and Design Authority (DA) for the equipment currently in service. The proposed direct award is limited to sustaining the existing assured in-service capabilities, including the procurement of additional units of the same assured capability, until the planned Out of Service Date (OSD) of the L121 and L115A3/A4 sniper rifles (longest OSDs). Estimated Contract Value PS500,000 (estimated) Contract Duration Four (4) Years. The contract duration aligns with the current planned Out of Service Date (OSD) of the L121A2 and L115A3/A4 Accuracy International sniper rifles and is limited to sustaining the existing assured in-service capability, including the provision of additional units and associated ancillaries as required, during its remaining service life.

Procurement Information

The Authority intends to award the contract without prior competition in accordance with Section 41 of the Procurement Act 2023, relying on: Schedule 5, Paragraph 6 of the Procurement Act 2023 (Single Supplier: Technical Reasons) for support, maintenance and repair services; and Schedule 5, Paragraph 7 of the Procurement Act 2023 (Additional or Repeat Goods, Services or Works) for the procurement of additional in-service Accuracy International sniper rifles. Single Supplier for Technical Reasons (Schedule 5, Paragraph 6): Accuracy International Ltd, as OEM and Design Authority, retains access to the technical data, design information, specialist tooling, engineering expertise and configuration knowledge necessary to support, maintain and repair the sniper rifle capability currently in service with the British Army. The continued provision of support and maintenance services requires access to proprietary technical information, specialist knowledge and design understanding that are not available to alternative/third-party suppliers. The Authority requires continued support of the existing assured capability throughout its remaining service life. Any attempt to transfer support activities to an alternative supplier would require extensive technical investigation, verification, validation, safety assurance and configuration management activities, resulting in unacceptable technical, safety and operational risk. Accordingly, due to an absence of competition for technical reasons, only Accuracy International Ltd can supply the services, and there is no reasonable alternative to those services that would meet the Authority's requirement for the repair and maintenance of the existing assured capability during its remaining service life. There are no reasonable alternatives. Additional or repeat goods, services (Schedule 5, Paragraph 7) : The contract also includes provision for the procurement of additional in-service Accuracy International sniper rifles to support fleet management, maintenance of the Total Fleet Requirement and operational requirements throughout the remaining life of the capability. For technical reasons set out above, only Accuracy International Ltd has access to the information necessary to supply additional units that are the same in-service, assured solution and fully compatible with the established support, maintenance and assurance arrangements. Whilst alternative solutions may exist within the wider market, those solutions would constitute platforms that are different from the bespoke assured capability currently in service. Procuring a different solution would require the Authority to concurrently operate separate training, assurance, maintenance and support arrangements for both the existing assured capability and the alternative solution. Procuring an alternative solution would therefore result in disproportionate technical difficulties in operation and maintenance, including increased complexity and logistical burden. Future Procurement Strategy This direct award does not seek to establish a replacement capability or meet any future requirement beyond the current capability planned service life. Upon reaching the planned Out of Service Date, the Authority intends to reassess its future requirement and determine the appropriate procurement strategy, including competition where appropriate Additional Information * Accuracy International Ltd is the OEM and Design Authority. * Maintenance and repair activities require access to technical data, specialist knowledge and configuration control held by Accuracy International Ltd * Additional systems are required to support maintenance of the Total Fleet Requirement. * Additional units must be the same in-service, assured solution to the assured capability currently in service. * This requirement is a continuation from the 701553541 - Accuracy International Combined Support Services Contract that was previously awarded on a single source basis. * The direct award is limited to sustaining the existing assured capability until the longest planned sniper rifles OSD, including through-life support and the procurement of the same in-service, assured solution and associated ancillaries as required. * The advertised contract value is the maximum estimated value of all potential orders that may be placed under the contract during its term. It does not represent a guaranteed level of expenditure. The Authority reserves the right not to place any orders under the contract and is not obliged to spend the full advertised value, or any value, during the lifetime of the contract.

Notice Details

Publication & Lifecycle

Open Contracting ID
ocds-h6vhtk-07946d
Publication Source
Find A Tender Service
Latest Notice
https://www.find-tender.service.gov.uk/Notice/103067-2026
Current Stage
Award
All Stages
Award

Procurement Classification

Notice Type
UK5 - Transparency Notice
Procurement Type
Standard
Procurement Category
Goods
Procurement Method
Direct
Procurement Method Details
Direct award
Tender Suitability
SME
Awardee Scale
SME

Common Procurement Vocabulary (CPV)

CPV Divisions

35 - Security, fire-fighting, police and defence equipment

50 - Repair and maintenance services


CPV Codes

35310000 - Miscellaneous weapons

50620000 - Repair and maintenance services of firearms and ammunition

Notice Value(s)

Tender Value
Not specified
Lots Value
Not specified
Awards Value
£416,666 £100K-£500K
Contracts Value
Not specified

Notice Dates

Publication Date
30 Oct 20262 weeks ago
Submission Deadline
Not specified
Future Notice Date
Not specified
Award Date
Not specified
Contract Period
5 Jan 2027 - 31 Mar 2031 4-5 years
Recurrence
Not specified

Notice Status

Tender Status
Complete
Lots Status
Complete
Awards Status
Pending
Contracts Status
Not Specified

Buyer & Supplier

Contracting Authority (Buyer)

Main Buyer
Defence Equipment and Support
Contact Name
Available with D3 Tenders Premium →
Contact Email
Available with D3 Tenders Premium →
Contact Phone
Available with D3 Tenders Premium →

Buyer Location

Locality
BRISTOL
Postcode
BS34 8JH
Postcode Area
Bristol
Country
England

Major Region (ITL 1)
TLK South West (England)
Basic Region (ITL 2)
TLK5 West of England
Small Region (ITL 3)
TLK52 Bath & North East Somerset and South Gloucestershire
Delivery Location
Not specified

Local Authority
South Gloucestershire
Electoral Ward
Stoke Park & Cheswick
Westminster Constituency
Filton and Bradley Stoke

Supplier Information

Number of Suppliers
1
Supplier Name

Accuracy International Ltd

Open Contracting Data Standard (OCDS)

View full OCDS Record for this contracting process

JSON Markdown

The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.

Loading OCDS record...