Notice Information
Notice Title
NCA_Injection Moulding Machine
Notice Description
Injection Moulding Machine consisting of: 28 or 32mm Diam. Hi Wear Resistant Plasticising Unit (58ccm or 76ccm Volume), 1/2" or 35mm Radius Open Nozzle, Fill of Hydraulic Oil, Set of Anti-Vibration Mounts, 50mm Mould height Reduction bushing, Secondary Plasticising unit 14mm Diameter (6.1ccm Volume), Multi-shapes mould tool, Air cooled chiller 4kw capacity, Mould temperature Control Unit and floor mounted Twin Tower Desiccant Drier unit.
Lot Information
Lot 1
Under Regulation Reg 6(1)(b)(ii) of the Procurement (Scotland) Regulations 2016, a contracting authority may award a contract without competition based on the following justification: Competition is absent for technical reasons (only if it is not caused by artificial narrowing down of the parameters of the procurement and no reasonable alternative or substitute exists) Explanation: This is a specialist piece of Injection Moulding Machine equipment and there are no other suppliers available in the market to supply this type of machine equipment in the form factor required. The 35T Injection Moulding Machine is around 2.5m in length and less than a meter in width offering flexibility on the screw size, which enables research teams to mould a largest volume range. The Injection Moulding Machine consists of: 28 or 32mm Diam. Hi Wear Resistant Plasticising Unit (58ccm or 76ccm Volume), 1/2" or 35mm Radius Open Nozzle, Fill of Hydraulic Oil, Set of Anti-Vibration Mounts, 50mm Mould height Reduction bushing, Secondary Plasticising unit 14mm Diameter (6.1ccm Volume), Multi-shapes mould tool, Air cooled chiller 4kw capacity, Mould temperature Control Unit and floor mounted Twin Tower Desiccant Drier unit. The principal purpose of the contract is to acquire goods in connection with research undertaken by the University.
Notice Details
Publication & Lifecycle
- Open Contracting ID
- ocds-r6ebe6-0000633216
- Publication Source
- Public Contracts Scotland
- Latest Notice
- https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=OCT397010
- Current Stage
- Award
- All Stages
- Award
Procurement Classification
- Notice Type
- PCS Notice - Website Contract Award Notice
- Procurement Type
- Standard
- Procurement Category
- Goods
- Procurement Method
- Open
- Procurement Method Details
- Open procedure
- Tender Suitability
- Not specified
- Awardee Scale
- SME
Common Procurement Vocabulary (CPV)
- CPV Divisions
38 - Laboratory, optical and precision equipments (excl. glasses)
-
- CPV Codes
38000000 - Laboratory, optical and precision equipments (excl. glasses)
Notice Value(s)
- Tender Value
- Not specified
- Lots Value
- Not specified
- Awards Value
- Not specified
- Contracts Value
- £59,765 Under £100K
Notice Dates
- Publication Date
- 13 Oct 20205 years ago
- Submission Deadline
- Not specified
- Future Notice Date
- Not specified
- Award Date
- 13 Oct 20205 years ago
- Contract Period
- Not specified - Not specified
- Recurrence
- Not specified
Notice Status
- Tender Status
- Complete
- Lots Status
- Complete
- Awards Status
- Not Specified
- Contracts Status
- Active
Buyer & Supplier
Contracting Authority (Buyer)
- Main Buyer
- HERIOT-WATT UNIVERSITY
- Contact Name
- Not specified
- Contact Email
- procurement@hw.ac.uk
- Contact Phone
- +44 1314514443
Buyer Location
- Locality
- RICCARTON, EDINBURGH
- Postcode
- EH14 4AP
- Post Town
- Edinburgh
- Country
- Scotland
-
- Major Region (ITL 1)
- TLM Scotland
- Basic Region (ITL 2)
- TLM1 East Central Scotland
- Small Region (ITL 3)
- TLM13 City of Edinburgh
- Delivery Location
- TLM75 City of Edinburgh
-
- Local Authority
- City of Edinburgh
- Electoral Ward
- Pentland Hills
- Westminster Constituency
- Edinburgh South West
Further Information
Notice Documents
-
https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=OCT397010
NCA_Injection Moulding Machine - Injection Moulding Machine consisting of: 28 or 32mm Diam. Hi Wear Resistant Plasticising Unit (58ccm or 76ccm Volume), 1/2" or 35mm Radius Open Nozzle, Fill of Hydraulic Oil, Set of Anti-Vibration Mounts, 50mm Mould height Reduction bushing, Secondary Plasticising unit 14mm Diameter (6.1ccm Volume), Multi-shapes mould tool, Air cooled chiller 4kw capacity, Mould temperature Control Unit and floor mounted Twin Tower Desiccant Drier unit.
Open Contracting Data Standard (OCDS)
View full OCDS Record for this contracting process
The Open Contracting Data Standard (OCDS) is a framework designed to increase transparency and access to public procurement data in the public sector. It is widely used by governments and organisations worldwide to report on procurement processes and contracts.
{
"tag": [
"compiled"
],
"id": "ocds-r6ebe6-0000633216-2020-10-13T00:00:00Z",
"date": "2020-10-13T00:00:00Z",
"ocid": "ocds-r6ebe6-0000633216",
"initiationType": "tender",
"parties": [
{
"id": "org-9",
"name": "Heriot-Watt University",
"identifier": {
"legalName": "Heriot-Watt University"
},
"address": {
"streetAddress": "Moyen House, Research Park North, Heriot-Watt University",
"locality": "Riccarton, Edinburgh",
"region": "UKM75",
"postalCode": "EH14 4AP"
},
"contactPoint": {
"email": "procurement@hw.ac.uk",
"telephone": "+44 1314514443",
"url": "http://"
},
"roles": [
"buyer"
],
"details": {
"classifications": [
{
"id": "Body governed by public law",
"scheme": "TED_CA_TYPE"
},
{
"id": "09",
"description": "Education",
"scheme": "COFOG"
}
],
"url": "http://hw.ac.uk"
}
},
{
"id": "org-282",
"name": "BOY LIMITED",
"identifier": {
"legalName": "BOY LIMITED"
},
"address": {
"streetAddress": "Unit 7 Brindley Close, Rushden Business Park",
"locality": "Rushden",
"region": "UK",
"postalCode": "NN10 6EN"
},
"contactPoint": {
"telephone": "+44 7917700395"
},
"roles": [
"supplier"
],
"details": {
"scale": "sme",
"url": "http://"
}
},
{
"id": "org-11",
"name": "Edinburgh Sheriff Court and Justice of the Peace Court",
"identifier": {
"legalName": "Edinburgh Sheriff Court and Justice of the Peace Court"
},
"address": {
"streetAddress": "Sherriff Court House 27 Chambers Street",
"locality": "Edinburgh"
},
"contactPoint": {
"url": "http://"
},
"roles": [
"reviewBody"
]
}
],
"buyer": {
"name": "Heriot-Watt University",
"id": "org-9"
},
"tender": {
"id": "HWU1978",
"title": "NCA_Injection Moulding Machine",
"description": "Injection Moulding Machine consisting of: 28 or 32mm Diam. Hi Wear Resistant Plasticising Unit (58ccm or 76ccm Volume), 1/2\" or 35mm Radius Open Nozzle, Fill of Hydraulic Oil, Set of Anti-Vibration Mounts, 50mm Mould height Reduction bushing, Secondary Plasticising unit 14mm Diameter (6.1ccm Volume), Multi-shapes mould tool, Air cooled chiller 4kw capacity, Mould temperature Control Unit and floor mounted Twin Tower Desiccant Drier unit.",
"status": "complete",
"items": [
{
"id": "1",
"deliveryLocation": {
"description": "Heriot-Watt University Riccarton Campus Edinburgh EH14 4AS"
},
"deliveryAddresses": [
{
"region": "UKM75"
}
],
"relatedLot": "1"
}
],
"procurementMethod": "open",
"procurementMethodDetails": "Open procedure",
"mainProcurementCategory": "goods",
"documents": [
{
"id": "OCT397010",
"documentType": "awardNotice",
"title": "NCA_Injection Moulding Machine",
"description": "Injection Moulding Machine consisting of: 28 or 32mm Diam. Hi Wear Resistant Plasticising Unit (58ccm or 76ccm Volume), 1/2\" or 35mm Radius Open Nozzle, Fill of Hydraulic Oil, Set of Anti-Vibration Mounts, 50mm Mould height Reduction bushing, Secondary Plasticising unit 14mm Diameter (6.1ccm Volume), Multi-shapes mould tool, Air cooled chiller 4kw capacity, Mould temperature Control Unit and floor mounted Twin Tower Desiccant Drier unit.",
"url": "https://www.publiccontractsscotland.gov.uk/search/show/search_view.aspx?ID=OCT397010",
"format": "text/html"
}
],
"lots": [
{
"id": "1",
"description": "Under Regulation Reg 6(1)(b)(ii) of the Procurement (Scotland) Regulations 2016, a contracting authority may award a contract without competition based on the following justification: Competition is absent for technical reasons (only if it is not caused by artificial narrowing down of the parameters of the procurement and no reasonable alternative or substitute exists) Explanation: This is a specialist piece of Injection Moulding Machine equipment and there are no other suppliers available in the market to supply this type of machine equipment in the form factor required. The 35T Injection Moulding Machine is around 2.5m in length and less than a meter in width offering flexibility on the screw size, which enables research teams to mould a largest volume range. The Injection Moulding Machine consists of: 28 or 32mm Diam. Hi Wear Resistant Plasticising Unit (58ccm or 76ccm Volume), 1/2\" or 35mm Radius Open Nozzle, Fill of Hydraulic Oil, Set of Anti-Vibration Mounts, 50mm Mould height Reduction bushing, Secondary Plasticising unit 14mm Diameter (6.1ccm Volume), Multi-shapes mould tool, Air cooled chiller 4kw capacity, Mould temperature Control Unit and floor mounted Twin Tower Desiccant Drier unit. The principal purpose of the contract is to acquire goods in connection with research undertaken by the University.",
"status": "complete",
"hasOptions": false
}
],
"coveredBy": [
"GPA"
],
"classification": {
"id": "38000000",
"scheme": "CPV"
}
},
"awards": [
{
"id": "HWU1978",
"suppliers": [
{
"id": "org-282",
"name": "BOY LIMITED"
}
],
"relatedLots": [
"1"
]
}
],
"contracts": [
{
"id": "HWU1978",
"awardID": "HWU1978",
"status": "active",
"value": {
"amount": 59765,
"currency": "GBP"
},
"dateSigned": "2020-10-13T00:00:00Z"
}
],
"language": "EN",
"description": "(SC Ref:633216)",
"bids": {
"statistics": [
{
"id": "928",
"measure": "bids",
"value": 1,
"relatedLot": "1"
},
{
"id": "929",
"measure": "smeBids",
"value": 1,
"relatedLot": "1"
},
{
"id": "930",
"measure": "foreignBidsFromEU",
"value": 1,
"relatedLot": "1"
},
{
"id": "931",
"measure": "foreignBidsFromNonEU",
"value": 0,
"relatedLot": "1"
},
{
"id": "932",
"measure": "electronicBids",
"value": 1,
"relatedLot": "1"
}
]
},
"links": [
{
"rel": "canonical",
"href": "https://api.publiccontractsscotland.gov.uk/v1/Notice?id=ocds-r6ebe6-0000633216"
}
],
"noticetype": "PCS Notice - Website Contract Award Notice"
}