Find a Tender in Woking

The contract is for a single supplier to Supply and Install of Uninterrupted Power Supply to BACS Control Panels at The Pirbright Institute, Ash Road, Pirbright, Surrey, GU24 0NF. See Appendix E - Contract Scope. PROJECT SCOPE AND OBJECTIVES The Brooksby Building at The Pirbright Institute (Pirbright) will be a high containment facility for work on high consequence pathogens such as foot-and-mouth diseases virus (FMDV) when fully operational in 2026. As part of the post-construction 'Day 2' works there is a requirement to carry out additional works to the Building Automation and Control System (BACS) within the Brooksby Building to ensure it is fully aligned with the primary system used across the rest of the Pirbright site. The following package of work has been funded: • Installation of Uninterrupted Power Supply (UPS) to critical BACS Control Panels Equipment - 1 x Large UPS Unit Riello 30kVA Master MPS (6 Pulse Rectifier, 384VDC Battery, UPS to be fitted with a Multicom 384 comms card to be wired by Pirbright appointed contractor. Equipment - 20 x Small UPS units Sentinel Pro single phase on line 1kVA (0.8kW) 240v a.c. Materials - As required All required materials to be included: Cable, containment, Unistrut etc. Installation Large UPS unit Installation of 1 large UPS to 415v a.c. 3ph distribution board 50-DB-06-A-MECH rated at 100Amp complete with bypass switch fed from 50-SB-01-A at the main LV switch board on the AHU deck. This is inclusive of re-routing SWA and black plastic coated metallic flexible conduits. Install a Unistrut base to keep the UPS off the [...]

The contract is for a single supplier to provide Design and Build of Work Package 3 - Design and Build of a Replacement Continuous Emissions Monitoring System (CEMS) and Secondary chamber Oxygen monitoring with new system(s), compliant with all current standards, as per the user requirement specification (URS) for The Pirbright Institute (Pirbright), Ash Road, Pirbright, Surrey, GU24 0NF. The scope of this contract is to replace the CEMS and Oxygen Analyser to ensure that the ISO 11 incinerator remains available to operate, safe, reliable and will serve the building for a minimum of 10 years. The scope of works will involve: • Detailed design work for the new CEMS and Oxygen Analyser, ensuring it complies with the URS and all applicable standards • Supply, manufacture, delivery and installation of the new CEMS and Oxygen Analyser • Offline commissioning of the new CEMS and Oxygen Analyser o It is a recommended that as much pre-commissioning works takes place prior to the shutdown • During the scheduled shutdown, the field sensors will be installed. • Final commissioning with the incinerator in operation. • On completion of commissioning, remove and dispose of existing CEMS from Incinerator Plantroom. • Management of all subcontractors employed by the supplier to complete these works. • Training and Operational Procedures • On completion, an O&M is to be submitted which provides details of works from design to completion. The O&M should include all relevant items shown in the PIF and should include all drawings, point to point testing and SAT commissioning. A separate section should be provided to show details of the following: o Brief Description of [...]

The contract is for a single supplier to Supply and Install of Uninterrupted Power Supply to BACS Control Panels at The Pirbright Institute, Ash Road, Pirbright, Surrey, GU24 0NF. See Appendix E - Contract Scope. PROJECT SCOPE AND OBJECTIVES The Brooksby Building at The Pirbright Institute (Pirbright) will be a high containment facility for work on high consequence pathogens such as foot-and-mouth diseases virus (FMDV) when fully operational in 2026. As part of the post-construction 'Day 2' works there is a requirement to carry out additional works to the Building Automation and Control System (BACS) within the Brooksby Building to ensure it is fully aligned with the primary system used across the rest of the Pirbright site. The following package of work has been funded: • Installation of Uninterrupted Power Supply (UPS) to critical BACS Control Panels Equipment - 1 x Large UPS Unit Riello 30kVA Master MPS (6 Pulse Rectifier, 384VDC Battery, UPS to be fitted with a Multicom 384 comms card to be wired by Pirbright appointed contractor. Equipment - 20 x Small UPS units Sentinel Pro single phase on line 1kVA (0.8kW) 240v a.c. Materials - As required All required materials to be included: Cable, containment, Unistrut etc. Installation Large UPS unit Installation of 1 large UPS to 415v a.c. 3ph distribution board 50-DB-06-A-MECH rated at 100Amp complete with bypass switch fed from 50-SB-01-A at the main LV switch board on the AHU deck. This is inclusive of re-routing SWA and black plastic coated metallic flexible conduits. Install a Unistrut base to keep the UPS off the [...]

The contract is for a single supplier to provide Project Management in relation to the Project Management Brooksby Building BACS additional works Project at The Pirbright Institute, Ash Road, Pirbright, Surrey, GU24 0NF. The Brooksby Building at The Pirbright Institute (Pirbright) will be a high containment large animal facility for work on high consequence pathogens such as foot-and-mouth diseases virus (FMDV), when fully operational in 2026. As part of the post-construction 'Day 2' works there is a requirement to carry out additional works to the Building Automation and Control System (BACS) within the Brooksby Building to ensure it is fully aligned with the primary system used across the rest of the Pirbright site. The following packages of work have been funded and will be procured by Pirbright, with technical support from the Project Manager, and will require on-site project management to ensure all interdependencies, risks and issues are managed appropriately for the duration of the project: • Recategorisation of BACS alarms to align with Pirbright site standard and integration to Pirbright Alarm Management System (AMS) of all BACS alarms within Brooksby (Work Package 1) • Provision, installation, testing and commissioning of an additional 140 no. (approx.) BACS Input/Output Alarm Points (Work Package 2) The Scope of Services for this contract is as follows: - Full Project Management to include: - Management of programme for packages of work listed above - Management of sub-contractors, these will be appointed directly by The Pirbright Institute - Management of interdependencies - Principal point of contact for the project, liaising with internal and external stakeholders as required - Reporting: Production of Project [...]

The contract is for a single supplier to provide Project Management in relation to the Project Management Brooksby Building BACS additional works Project at The Pirbright Institute, Ash Road, Pirbright, Surrey, GU24 0NF. The Brooksby Building at The Pirbright Institute (Pirbright) will be a high containment large animal facility for work on high consequence pathogens such as foot-and-mouth diseases virus (FMDV), when fully operational in 2026. As part of the post-construction 'Day 2' works there is a requirement to carry out additional works to the Building Automation and Control System (BACS) within the Brooksby Building to ensure it is fully aligned with the primary system used across the rest of the Pirbright site. The following packages of work have been funded and will be procured by Pirbright, with technical support from the Project Manager, and will require on-site project management to ensure all interdependencies, risks and issues are managed appropriately for the duration of the project: • Recategorisation of BACS alarms to align with Pirbright site standard and integration to Pirbright Alarm Management System (AMS) of all BACS alarms within Brooksby (Work Package 1) • Provision, installation, testing and commissioning of an additional 140 no. (approx.) BACS Input/Output Alarm Points (Work Package 2) The Scope of Services for this contract is as follows: - Full Project Management to include: - Management of programme for packages of work listed above - Management of sub-contractors, these will be appointed directly by The Pirbright Institute - Management of interdependencies - Principal point of contact for the project, liaising with internal and external stakeholders as required - Reporting: Production of Project [...]

Please read ToR for full details. EVALUATION PURPOSE AND USE, OBJECTIVES, AND SCOPE As the project is coming to an end, the main purpose of this final evaluation is to independently review and verify whether the results of Land for Life have been achieved and sustained, meeting its objectives and from this provide lessons for the wider SOKNOT landscape and WWF network. The objectives are to: Document the level of effectiveness in reaching the planned project outcomes and any unforeseen changes that have come about. Document the impact to date of the work on targeted biodiversity and key stakeholders / beneficiaries (in particular identifying the benefits (positive and negative). Determine the sustainability of the results and interventions and any recommendations for future programs within the bigger SOKNOT landscape . Determine what were the main factors, processes and actors that impeded or contributed to success and sustainability of the projects outcomes thus far (or not); and identify opportunities and recommendations for further sustainability. Document the lessons learned, good practices and recommendations identified for future programs within SOKNOT. [...]

Cleaning services for selected Woking Borough Council Properties including operational, residential and community facilities and car parks [...]

The scope of works will involve: • Detailed design work for the hydraulic system, with all calculations (tank sizing, pump sizing, pipe pressure loss, etc) • Supply, manufacture, delivery and installation of the hydraulic system • Overhaul of existing hydraulic rams • Remove the existing hydraulic system and drain all oil into suitable containers. • Install the new hydraulic system and connect to the overhauled rams • Commissioning of hydraulic system in isolation of the control panel. • Final commissioning with the control panel providing the enabling/disabling signals. • During the works, the existing hydraulic system and drained oil will remain in the loading hall area. The site team will arrange for this to be taken outside of containment. However, the supplier is to allow costs for: o Draining all oil from the hydraulic system into suitable containers o Dismantling the existing hydraulic system so it can be taken out of the fire door (approx. 900mm wide) o Lift and shift of all items outside of biocontainment o Disposal of existing hydraulic system and provide all waste certification to the Client Project Manager • Management of all subcontractors employed by the supplier to complete these works. • On completion, an O&M is to be submitted which provides details of works from design to completion. The O&M should include all relevant items shown in the PIF and should include all valves/components labelled with a schedule of components included. A separate section which provides details of the following o Brief Description of the works being carried out. o Project Risk Assessment. o Key structural principals. o Hazardous materials used. o Information on the future removal of installed plant. o H&S information about equipment provided for cleaning or [...]

The contract is for a single supplier to provide Design and Build of Work Package 3 - Design and Build of a Replacement Continuous Emissions Monitoring System (CEMS) and Secondary chamber Oxygen monitoring with new system(s), compliant with all current standards, as per the user requirement specification (URS) for The Pirbright Institute (Pirbright), Ash Road, Pirbright, Surrey, GU24 0NF. The scope of this contract is to replace the CEMS and Oxygen Analyser to ensure that the ISO 11 incinerator remains available to operate, safe, reliable and will serve the building for a minimum of 10 years. The scope of works will involve: • Detailed design work for the new CEMS and Oxygen Analyser, ensuring it complies with the URS and all applicable standards • Supply, manufacture, delivery and installation of the new CEMS and Oxygen Analyser • Offline commissioning of the new CEMS and Oxygen Analyser o It is a recommended that as much pre-commissioning works takes place prior to the shutdown • During the scheduled shutdown, the field sensors will be installed. • Final commissioning with the incinerator in operation. • On completion of commissioning, remove and dispose of existing CEMS from Incinerator Plantroom. • Management of all subcontractors employed by the supplier to complete these works. • Training and Operational Procedures • On completion, an O&M is to be submitted which provides details of works from design to completion. The O&M should include all relevant items shown in the PIF and should include all drawings, point to point testing and SAT commissioning. A separate section should be provided to show details of the following: o Brief Description of [...]

Statutory water hygiene testing, inspection and maintenance to the Council’s Housing Stock. The contract relates to blocks with shared water supplies, not individual houses. [...]