800000000.00

Notice Title

800000000.00

Notice Description

This Demand Management and Renewables Framework Alliance Contract is complemented by a suite of other CCS commercial agreements for related supplies and services (e.g. estate professional services, project management and design services, facilities management, utilities and fuels, furniture etc.). This will collectively enable Additional Clients to effectively manage the full life cycle requirements of their built asset and associated strategies on the basis of whole life value considerations. The Supplier Alliance Member may be required to consult and/or work with suppliers appointed to other CCS agreements. This will be further detailed in the specific Project Contract, to enable decisions to be informed on the basis of whole life value and to enable the coordination of full (or part) life-cycle requirements. The scope of works and services required and the procurement route will be specified at the Project Contract stage.

Lot Information

Lot 1

Provision of Demand Management & Renewables Solutions

A Supplier Alliance Member in Lot 1 under the Framework Contract shall provide access to expert solar photovoltaic services across multiple delivery stages, from design and feasibility to installation and maintenance and disposal. The Supplier Alliance Member shall provide solar pv services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services within ground, roof mounted and large scale solar farm projects may include, but are not limited to; * Data and testing including analysis of impact on electricity maximum load across a Clients estate; * Connection to the grid and the relevant Distribution Network Operator (DNO); * Inverter maintenance and further solar pv cleaning services; * Site survey investigations and reports; * Planning approval; * Environmental disposal; * Health and Safety advice; * Business case development; * On site risk assessments; * Environmental assessments; The Supplier Alliance Member shall provide all services in a safe and efficient way as determined by law and the required standards set out by the Additional Client within the Project Contract Supplier Alliance Members within this Lot will provide all of the following stages of works and services. i) Design and Feasibility The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) looking at solar photovoltaic projects to support their Carbon Net Zero strategies. Additional Clients may require technical support for individual solar projects or wider scale solar pv across an organisation's estate. ii) Installation, maintenance, disposal For installation and maintenance works a Supplier Alliance Member will be required to adhere, but not limited to, the following standards and accreditations; * Microgeneration (MCS 001-1) standard personnel. * NICEIC Approved Contractor * Use of pyranometers for assessment (ISO/TR 9901:2021) * Building Regulations Part A (Structural Safety) and Part P (Electrical Safety) * British Standard 7671 The Supplier Alliance Member shall ensure any servicing and maintenance works are carried out using the appropriate machinery and technology in line with relevant industry standards relating to, but not limited to, the following: * Metering checks; * Pyranometer checks; * Fault alarm; * Data software maintenance; * Cleaning of solar pv panels; * Inverter checks; Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or end of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

Renewal: CCS reserve the right to extend lots by varying durations

A Supplier Alliance Member in Lot 1 under the Framework Contract shall provide access to expert solar photovoltaic services across multiple delivery stages, from design and feasibility to installation and maintenance and disposal. The Supplier Alliance Member shall provide solar pv services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services within ground, roof mounted and large scale solar farm projects may include, but are not limited to; * Data and testing including analysis of impact on electricity maximum load across a Clients estate; * Connection to the grid and the relevant Distribution Network Operator (DNO); * Inverter maintenance and further solar pv cleaning services; * Site survey investigations and reports; * Planning approval; * Environmental disposal; * Health and Safety advice; * Business case development; * On site risk assessments; * Environmental assessments; The Supplier Alliance Member shall provide all services in a safe and efficient way as determined by law and the required standards set out by the Additional Client within the Project Contract Supplier Alliance Members within this Lot will provide all of the following stages of works and services. i) Design and Feasibility The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) looking at solar photovoltaic projects to support their Carbon Net Zero strategies. Additional Clients may require technical support for individual solar projects or wider scale solar pv across an organisation's estate. ii) Installation, maintenance, disposal For installation and maintenance works a Supplier Alliance Member will be required to adhere, but not limited to, the following standards and accreditations; * Microgeneration (MCS 001-1) standard personnel. * NICEIC Approved Contractor * Use of pyranometers for assessment (ISO/TR 9901:2021) * Building Regulations Part A (Structural Safety) and Part P (Electrical Safety) * British Standard 7671 The Supplier Alliance Member shall ensure any servicing and maintenance works are carried out using the appropriate machinery and technology in line with relevant industry standards relating to, but not limited to, the following: * Metering checks; * Pyranometer checks; * Fault alarm; * Data software maintenance; * Cleaning of solar pv panels; * Inverter checks; Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or end of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

Renewal: CCS reserve the right to extend lots by varying durations

A Supplier Alliance Member in Lot 2 under the Framework Contract shall provide access to expert battery energy storage across multiple delivery stages, from design and feasibility to installation and maintenance and disposal. The Supplier Alliance Member shall provide battery and energy storage services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services may include, but not limited to, the following; * battery storage including capacitor services; * thermal energy storage; * hydrogen storage and hydropower; and * connection to relevant distribution network operator (DNO) connection to Additional Clients estate including any renewable assets and electrical vehicle charging points. The Supplier Alliance Member shall provide battery energy storage products and services in line with relevant industry standards. This includes the provision of, but not limited to, the following; * Compressed air energy storage; * Mechanical gravity energy storage and; * Flow batteries including heat storage. Suppliers Alliance Members within this Lot will provide at least one of the following within the battery energy storage industry i) Design and Feasibility The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) investigating battery energy storage to support their Carbon Net Zero strategies and balancing of the national grid. Additional Clients may require technical support for individual battery storage projects or wider energy storage across an organisation's estate ii) Installation, maintenance, disposal Installation: For installation and maintenance works this will include but not limited to, the following standards and accreditations; * Microgeneration (Battery Storage Standard (MIS 3012) accredited personnel; * NICEIC Approved Contractor; * Energy related product rating or future equivalent; * Flow temperature checks in line with relevant, and future, Building Regulations; * Heat loss calculation checks in line with relevant, and future, Building Regulations; * Building Regulations Part L and Part P; and * British Standard 7671 The Supplier Alliance Member shall ensure that where civil engineering works apply, they are delivered in line with the relevant British Standards and industry standards. Maintenance: The Supplier Alliance Member shall ensure that the Additional Client is given twenty-eight (28) calendar days' notice of any scheduled maintenance. The Supplier Alliance Member shall ensure all servicing and maintenance works are carried out by appropriate qualified staff relevant to the product or service. Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or end of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

Renewal: CCS reserve the right to extend lots by varying durations

A Supplier Alliance Member in Lot 2 under the Framework Contract shall provide access to expert battery energy storage across multiple delivery stages, from design and feasibility to installation and maintenance and disposal. The Supplier Alliance Member shall provide battery and energy storage services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services may include, but not limited to, the following; * battery storage including capacitor services; * thermal energy storage; * hydrogen storage and hydropower; and * connection to relevant distribution network operator (DNO) connection to Additional Clients estate including any renewable assets and electrical vehicle charging points. The Supplier Alliance Member shall provide battery energy storage products and services in line with relevant industry standards. This includes the provision of, but not limited to, the following; * Compressed air energy storage; * Mechanical gravity energy storage and; * Flow batteries including heat storage. Suppliers Alliance Members within this Lot will provide at least one of the following within the battery energy storage industry i) Design and Feasibility The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) investigating battery energy storage to support their Carbon Net Zero strategies and balancing of the national grid. Additional Clients may require technical support for individual battery storage projects or wider energy storage across an organisation's estate ii) Installation, maintenance, disposal Installation: For installation and maintenance works this will include but not limited to, the following standards and accreditations; * Microgeneration (Battery Storage Standard (MIS 3012) accredited personnel; * NICEIC Approved Contractor; * Energy related product rating or future equivalent; * Flow temperature checks in line with relevant, and future, Building Regulations; * Heat loss calculation checks in line with relevant, and future, Building Regulations; * Building Regulations Part L and Part P; and * British Standard 7671 The Supplier Alliance Member shall ensure that where civil engineering works apply, they are delivered in line with the relevant British Standards and industry standards. Maintenance: The Supplier Alliance Member shall ensure that the Additional Client is given twenty-eight (28) calendar days' notice of any scheduled maintenance. The Supplier Alliance Member shall ensure all servicing and maintenance works are carried out by appropriate qualified staff relevant to the product or service. Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or end of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

Renewal: CCS reserve the right to extend lots by varying durations

The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) investigating how heat pumps can support their Carbon Net Zero strategies particularly their heat decarbonisation strategy. Additional Clients may require technical support for individual heat pump projects or wider heat pump projects across an organisation's estate. The Supplier Alliance Member shall provide relevant design standards in accordance with the heat pump industry standards. This experience is in accordance with the professional grade definitions set out by the Additional Client within the Project Contract as outlined in Section 7 (Resources) The Supplier Alliance Member shall provide heat pump services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services may include, but not limited to, * water source heat pumps; * air source heat pumps; * ground source heat pumps; * geothermal; * site survey investigations and reports; * planning approval; * environmental disposal; * health and Safety advice; * business case development; * on site risk assessments including compressor unit checks; * environmental assessments; and * Establishing Shared ground loop systems The Supplier Alliance Member shall provide suitably qualified personnel with the relevant experience to support the research and design requirements for each Project Contract. The Supplier Alliance Member will ensure it is aligned with the Government's Heat and Building strategy The Supplier Alliance Member shall be able to provide on site surveys and assessments where required. When requested by the Additional Client, the Supplier Alliance Member shall provide a list of all staff requiring admission to Additional Clients premises or any specified third party premises, in advance of any on site surveys and assessments. The Supplier Alliance Member shall ensure any knowledge or data is shared accordingly with the Additional Clients staff in line with the Government Consultancy Playbook (May 2021) ii) Installation, maintenance, disposal For installation and maintenance works this will include but not limited to, the following standards and accreditations; * Microgeneration (Heat Pump Standard) accredited personnel. * ISO 27.080 and relevant sub stages such as 21978 and 13256 * Energy related product rating or future equivalent * NICEIC Approved Contractor * Gas Safety Registration The Supplier Alliance Member shall ensure all of the staff, including subcontractors, concerned with the Client and Additional Client requirements are suitably trained and comply with all relevant health and safety legislation throughout the duration of the framework agreement and any contract awarded. When requested by the Additional Client, the Supplier Alliance member shall provide a list of all staff requiring admission to Additional Client's premises or any specified third-party premises, in advance of the equipment delivery, installation or removal date. The Supplier Alliance Member shall ensure that where civil engineering works apply, they are delivered in line with the relevant British Standards and industry standards. Maintenance: The Supplier Alliance Member shall provide a breakdown of relevant servicing and maintenance costs to the Additional Client where applicable. The Supplier Alliance Member shall ensure all servicing and maintenance works are carried out by appropriate qualified staff relevant to the product or service. Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or end of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

Renewal: CCS reserve the right to extend lots by varying durations

The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) investigating how heat pumps can support their Carbon Net Zero strategies particularly their heat decarbonisation strategy. Additional Clients may require technical support for individual heat pump projects or wider heat pump projects across an organisations estate. The Supplier Alliance Member shall provide relevant design standards in accordance with the heat pump industry standards. This experience is in accordance with the professional grade definitions set out by the Additional Client within the Project Contract as outlined in Section 7 (Resources) The Supplier Alliance Member shall provide heat pump services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services may include, but not limited to, * water source heat pumps; * air source heat pumps; * ground source heat pumps; * geothermal; * site survey investigations and reports; * planning approval; * environmental disposal; * health and Safety advice; * business case development; * on site risk assessments including compressor unit checks; * environmental assessments; and * Establishing Shared ground loop systems The Supplier Alliance Member shall provide suitably qualified personnel with the relevant experience to support the research and design requirements for each Project Contract. The Supplier Alliance Member will ensure it is aligned with the Government's Heat and Building strategy The Supplier Alliance Member shall be able to provide on site surveys and assessments where required. When requested by the Additional Client, the Supplier Alliance Member shall provide a list of all staff requiring admission to Additional Clients premises or any specified third party premises, in advance of any on site surveys and assessments The Supplier Alliance Member shall ensure any knowledge or data is shared accordingly with the Additional Clients staff in line with the Government Consultancy Playbook (May 2021) ii) Installation, maintenance, disposal For installation and maintenance works this will include but not limited to,the following standards and accreditations; * Microgeneration (Heat Pump Standard) accredited personnel. * ISO 27.080 and relevant sub stages such as 21978 and 13256 * Energy related product rating or future equivalent * NICEIC Approved Contractor * Gas Safety Registration The Supplier Alliance Member shall ensure all of the staff, including subcontractors, concerned with the Client and Additional Client requirements are suitably trained and comply with all relevant health and safety legislation throughout the duration of the framework agreement and any contract awarded. When requested by the Additional Client, the Supplier Alliance member shall provide a list of all staff requiring admission to Additional Client's premises or any specified third party premises, in advance of the equipment delivery, installation or removal date. The Supplier Alliance Member shall ensure that where civil engineering works apply, they are delivered in line with the relevant British Standards and industry standards. Maintenance: The Supplier Alliance Member shall provide a breakdown of relevant servicing and maintenance costs to the Additional Client where applicable. The Supplier Alliance Member shall ensure all servicing and maintenance works are carried out by appropriate qualified staff relevant to the product or service. Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or end of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

Renewal: CCS reserve the right to extend lots by varying durations

The services provided within Lot 4.1 and 4.2, shall be applied, but not limited to, the following heat network types * Deep geothermal sub-soil; * Combined heat and power systems; * District heat network; * Communal heating; * Energy from waste; * Waste recovered heat sources; * Large scale solar thermal heat; * Hydrogen for heat sources; and * Shared ground loop systems Lot 4.1 Design Scope The Supplier Alliance Member shall provide the Additional Client with heat network, space heating and domestic heating and cooling design services or sometimes referred to as district heating. The Supplier Alliance Member shall deliver services in line with the Government heat decarbonisation and heat network strategy and Targets outlined in the Net Zero Strategy and Heat and Building strategy. The services provided within Lot 4.1 and 4.2, shall be applied, but not limited to, the following heat network types * Deep geothermal sub-soil; * Combined heat and power systems; * District heat network; * Communal heating; * Energy from waste; * Waste recovered heat sources; * Large scale solar thermal heat; * Hydrogen for heat sources; and * Shared ground loop systems Lot 4.1 Design Scope The Supplier Alliance Member shall provide the Additional Client with heat network, space heating and domestic heating and cooling design services or sometimes referred to as district heating. The Supplier Alliance Member shall deliver services in line with the Government heat decarbonisation and heat network strategy and Targets outlined in the Net Zero Strategy and Heat and Building strategy. The Supplier Alliance Member shall work with the Additional Client who will choose to utilise the CIBSE CP1 Code of Practice in line with government Heat Network Delivery Unit and Green Heat Network Funds. The Supplier Alliance Member shall adhere to relevant heat network design and construction industry standards including, but not limited to; the Heat Network and Billing Regulations (2014) and future OFGEM heat network infrastructure legislation. The Supplier Alliance Member shall provide the Additional Client with design services that include, but not limited to, the following; * Onsite surveys and infrastructure assessments; * Design services for the development of a new district energy centre; * Business case support for connection to existing heat networks including financial forecasting; Design services to support the maintenance and improvement works on an existing Additional Clients heat network The Supplier Alliance Member shall adhere to relevant heat network design and construction industry standards including, but not limited to; the Heat Network and Billing Regulations (2014) and future OFGEM heat network infrastructure legislation.

Renewal: CCS reserve the right to extend lots by varying durations

The services provided within Lot 4.1 and 4.2, shall be applied, but not limited to, the following heat network types * Deep geothermal sub-soil; * Combined heat and power systems; * District heat network; * Communal heating; * Energy from waste; * Waste recovered heat sources; * Large scale solar thermal heat; * Hydrogen for heat sources; and * Shared ground loop systems The Supplier Alliance Member shall provide the Additional Client with heat network, space heating and domestic heating and cooling design services or sometimes referred to as district heating for the design and subsequent construction of new heat network projects. The Supplier Alliance Member shall deliver services in line with the Government heat decarbonisation and heat network strategy and Targets outlined in the Net Zero Strategy and Heat and Building strategy The Supplier Alliance Member shall work with the Additional Client who will choose to utilise the CIBSE CP1 Code of Practice in line with government Heat Network Delivery Unit and Green Heat Network Funds. The Supplier Alliance Member shall ensure that any design of a new heat network meets the relevant construction standards for the project type specified at Project Brief stage. The Supplier Alliance Member shall provide project management services and personnel for the construction of a new district heat network including sourcing effective subcontractors to deliver the Project Contract. This will include the provision of, but not limited to, the following; * Civil engineering works * Installation works of insulated pipe systems * Operation and maintenance technical inspectors * Control system specialist * Design Engineer The Supplier Alliance Member shall ensure that all construction projects and maintenance works provide the relevant number of Heat Interface Units required for the Project Contract. The Supplier Alliance Member may be required by the Additional Client to align with the relevant Heat Trust standards and future regulation.

Renewal: CCS reserve the right to extend lots by varying durations

A Supplier Alliance Member in Lot 5 under the Framework Contract shall provide access to a range of industry expert decarbonisation professional services at discrete delivery stages, from inception to completion, to support a variety of projects including, but not limited to, the following areas: * Carbon reporting; * Solar photovoltaic services; * Battery energy storage; * Heat pump services; * Heat network development; * Power Purchase Agreements (both direct and indirect wire); * Environmental planning and protection; * Pollution control; * Carbon offsetting; * Scope emission reporting; * Building retrofit; The Supplier Alliance Member is required to provide technical support to public sector organisations looking at projects to support their Carbon Net Zero strategies. The Additional Client may be requiring technical support for individual projects or a wider decarbonisation strategy of their whole estate. The Supplier Alliance Member shall have the ability to provide services relating to the advice, design, research and production of feasibility studies against at least one of the products and services listed in the Scope. The Supplier Alliance Member shall provide design standards in accordance with the relevant industry. The Supplier Alliance Member shall provide suitably qualified personnel with the relevant experience to support the research and design requirements for each Project Contract. This experience is in accordance with the professional grade definitions set out by the Additional Client within the Project Brief.

Renewal: CCS reserve the right to extend lots by varying durations

A Supplier Alliance Member in Lot 1 under the Framework Contract shall provide access to expert solar photovoltaic services across multiple delivery stages, from design and feasibility to installation and aintenance and disposal. The Supplier Alliance Member shall provide solar pv services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services within ground, roof mounted and large scale solar farm projects may include, but are not limited to; * Data and testing including analysis of impact on electricity maximum load across a Clients estate; * Connection to the grid and the relevant Distribution Network Operator (DNO); * Inverter maintenance and further solar pv cleaning services; * Site survey investigations and reports; * Planning approval; * Environmental disposal; * Health and Safety advice; * Business case development; * On site risk assessments; * Environmental assessments; The Supplier Alliance Member shall provide all services in a safe and efficient way as determined by law and the required standards set out by the Additional Client within the Project Contract Supplier Alliance Members within this Lot will provide all of the following stages of works and services. i) Design and Feasibility The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) looking at solar photovoltaic projects to support their Carbon Net Zero strategies. Additional Clients may require technical support for individual solar projects or wider scale solar pv across an organisation's estate. ii) Installation, maintenance, disposal For installation and maintenance works a Supplier Alliance Member will be required to adhere, but not limited to, the following standards and accreditations; * Microgeneration (MCS 001-1) standard personnel. * NICEIC Approved Contractor * Use of pyranometers for assessment (ISO/TR 9901:2021) * Building Regulations Part A (Structural Safety) and Part P (Electrical Safety) * British Standard 7671 The Supplier Alliance Member shall ensure any servicing and maintenance works are carried out using the appropriate machinery and technology in line with relevant industry standards relating to, but not limited to, the following: * Metering checks; * Pyranometer checks; * Fault alarm; * Data software maintenance; * Cleaning of solar pv panels; * Inverter checks; Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or end of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

A Supplier Alliance Member in Lot 1 under the Framework Contract shall provide access to expert solar photovoltaic services across multiple delivery stages, from design and feasibility to installation and maintenance and disposal. The Supplier Alliance Member shall provide solar pv services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services within ground, roof mounted and large scale solar farm projects may include, but are not limited to; * Data and testing including analysis of impact on electricity maximum load across a Clients estate; * Connection to the grid and the relevant Distribution Network Operator (DNO); * Inverter maintenance and further solar pv cleaning services; * Site survey investigations and reports; * Planning approval; * Environmental disposal; * Health and Safety advice; * Business case development; * On site risk assessments; * Environmental assessments; The Supplier Alliance Member shall provide all services in a safe and efficient way as determined by law and the required standards set out by the Additional Client within the Project Contract Supplier Alliance Members within this Lot will provide all of the following stages of works and services. i) Design and Feasibility The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) looking at solar photovoltaic projects to support their Carbon Net Zero strategies. Additional Clients may require technical support for individual solar projects or wider scale solar pv across an organisation's estate. ii) Installation, maintenance, disposal For installation and maintenance works a Supplier Alliance Member will be required to adhere, but not limited to, the following standards and accreditations; * Microgeneration (MCS 001-1) standard personnel. * NICEIC Approved Contractor * Use of pyranometers for assessment (ISO/TR 9901:2021) * Building Regulations Part A (Structural Safety) and Part P (Electrical Safety) * British Standard 7671 The Supplier Alliance Member shall ensure any servicing and maintenance works are carried out using the appropriate machinery and technology in line with relevant industry standards relating to, but not limited to, the following: * Metering checks; * Pyranometer checks; * Fault alarm; * Data software maintenance; * Cleaning of solar pv panels; * Inverter checks; Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or and of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

The Supplier Alliance Member is required to provide technical support to public sector Organisations (Additional Clients) investigating how heat pumps can support their Carbon Net Zero strategies particularly their heat decarbonisation strategy. Additional Clients may require technical support for individual heat pump projects or wider heat pump projects across an organisations estate. The Supplier Alliance Member shall provide relevant design standards in accordance with the heat pump industry standards. This experience is in accordance with the professional grade definitions set out by the Additional Client within the Project Contract as outlined in Section 7 (Resources) The Supplier Alliance Member shall provide heat pump services that support an Additional Clients decarbonisation strategy and energy reduction measures. Typical works and services may include, but not limited to, * water source heat pumps; * air source heat pumps; * ground source heat pumps; * geothermal; * site survey investigations and reports; * planning approval; * environmental disposal; * health and Safety advice; * business case development; * on site risk assessments including compressor unit checks; * environmental assessments; and * Establishing Shared ground loop systems The Supplier Alliance Member shall provide suitably qualified personnel with the relevant experience to support the research and design requirements for each Project Contract. The Supplier Alliance Member will ensure it is aligned with the Government's Heat and Building strategy The Supplier Alliance Member shall be able to provide on site surveys and assessments where required. When requested by the Additional Client, the Supplier Alliance Member shall provide a list of all staff requiring admission to Additional Clients premises or any specified third party premises, in advance of any on site surveys and assessments The Supplier Alliance Member shall ensure any knowledge or data is shared accordingly with the Additional Clients staff in line with the Government Consultancy Playbook (May 2021) ii) Installation, maintenance, disposal For installation and maintenance works this will include but not limited to,the following standards and accreditations; * Microgeneration (Heat Pump Standard) accredited personnel. * ISO 27.080 and relevant sub stages such as 21978 and 13256 * Energy related product rating or future equivalent * NICEIC Approved Contractor * Gas Safety Registration The Supplier Alliance Member shall ensure all of the staff, including subcontractors, concerned with the Client and Additional Client requirements are suitably trained and comply with all relevant health and safety legislation throughout the duration of the framework agreement and any contract awarded. When requested by the Additional Client, the Supplier Alliance member shall provide a list of all staff requiring admission to Additional Client's premises or any specified third party premises, in advance of the equipment delivery, installation or removal date. The Supplier Alliance Member shall ensure that where civil engineering works apply, they are delivered in line with the relevant British Standards and industry standards. Maintenance: The Supplier Alliance Member shall provide a breakdown of relevant servicing and maintenance costs to the Additional Client where applicable. The Supplier Alliance Member shall ensure all servicing and maintenance works are carried out by appropriate qualified staff relevant to the product or service. Disposal: Where appropriate, the Supplier Alliance Member shall ensure that any equipment from an incumbent contract or end of an existing contract are decommissioned and disposed in line with appropriate environmental standards.

Publication & Lifecycle

Open Contracting ID

ocds-h6vhtk-030509

Publication Source

Find A Tender Service

Latest Notice

https://www.find-tender.service.gov.uk/Notice/033275-2025

Current Stage

Award

All Stages

Planning, Tender, Award

Procurement Classification

Notice Type

Planning Notice

Procurement Type

Framework

Procurement Category

Services

Procurement Method

Open

Procurement Method Details

Open procedure

Tender Suitability

Not specified

Awardee Scale

Large

Common Procurement Vocabulary (CPV)

CPV Divisions

09 - Petroleum products, fuel, electricity and other sources of energy

31 - Electrical machinery, apparatus, equipment and consumables; lighting

38 - Laboratory, optical and precision equipments (excl. glasses)

39 - Furniture (incl. office furniture), furnishings, domestic appliances (excl. lighting) and cleaning products

42 - Industrial machinery

44 - Construction structures and materials; auxiliary products to construction (except electric apparatus)

45 - Construction work

50 - Repair and maintenance services

51 - Installation services (except software)

65 - Public utilities

71 - Architectural, construction, engineering and inspection services

72 - IT services: consulting, software development, Internet and support

73 - Research and development services and related consultancy services

79 - Business services: law, marketing, consulting, recruitment, printing and security

90 - Sewage, refuse, cleaning and environmental services

---

CPV Codes

09121200 - Mains gas

09123000 - Natural gas

09300000 - Electricity, heating, solar and nuclear energy

09310000 - Electricity

09320000 - Steam, hot water and associated products

09321000 - Hot water

09323000 - District heating

09324000 - Long-distance heating

09330000 - Solar energy

09331000 - Solar panels

09331100 - Solar collectors for heat production

09331200 - Solar photovoltaic modules

09332000 - Solar installation

31000000 - Electrical machinery, apparatus, equipment and consumables; lighting

31121300 - Wind-energy generators

31121310 - Windmills

31121320 - Wind turbines

31121330 - Wind turbine generators

31121331 - Turbine rotors

31121340 - Wind farm

31122000 - Generator units

31122100 - Fuel cells

31124000 - Steam-turbine generator and related apparatus

31124100 - Turbine generator sets

31124200 - Turbine generator control apparatus

31126000 - Dynamos

31127000 - Emergency generator

31128000 - Turbogenerator

31161800 - Parts of gas generators

31200000 - Electricity distribution and control apparatus

31220000 - Electrical circuit components

31230000 - Parts of electricity distribution or control apparatus

31320000 - Power distribution cables

31682000 - Electricity supplies

31712347 - Power or solar diodes

38550000 - Meters

38551000 - Energy meters

38552000 - Electronic meters

38553000 - Magnetic meters

38554000 - Electricity meters

39715000 - Water heaters and heating for buildings; plumbing equipment

39715100 - Electric instantaneous or storage water heaters and immersion heaters

39715200 - Heating equipment

39717000 - Fans and air-conditioning appliances

39717100 - Fans

39717200 - Air-conditioning appliances

42160000 - Boiler installations

42161000 - Hot-water boilers

42162000 - Steam-generating boilers

42163000 - Steam generators

42510000 - Heat-exchange units, air-conditioning and refrigerating equipment, and filtering machinery

42511000 - Heat-exchange units and machinery for liquefying air or other gases

42511100 - Heat-exchange units

42511110 - Heat pumps

42511200 - Machinery for liquefying air or other gases

42512000 - Air-conditioning installations

42512100 - Window air-conditioning machines

42512200 - Wall air-conditioning machines

42515000 - District heating boiler

42522100 - Parts of fans

42530000 - Parts of refrigerating and freezing equipment and heat pumps

42533000 - Parts of heat pumps

44163120 - Distance-heating pipes

44163121 - Heating pipes

44622100 - Heat-recovery equipment

45232000 - Ancillary works for pipelines and cables

45232140 - District-heating mains construction work

45232141 - Heating works

45232142 - Heat-transfer station construction work

45251000 - Construction works for power plants and heating plants

45251250 - District-heating plant construction work

45261215 - Solar panel roof-covering work

45262640 - Environmental improvement works

45315000 - Electrical installation work of heating and other electrical building-equipment

45331000 - Heating, ventilation and air-conditioning installation work

50721000 - Commissioning of heating installations

51112000 - Installation services of electricity distribution and control equipment

65300000 - Electricity distribution and related services

71312000 - Structural engineering consultancy services

71313000 - Environmental engineering consultancy services

71313400 - Environmental impact assessment for construction

71314000 - Energy and related services

71314100 - Electrical services

71314200 - Energy-management services

71314300 - Energy-efficiency consultancy services

71314310 - Heating engineering services for buildings

71315200 - Building consultancy services

71315210 - Building services consultancy services

71321000 - Engineering design services for mechanical and electrical installations for buildings

71520000 - Construction supervision services

71521000 - Construction-site supervision services

71530000 - Construction consultancy services

71540000 - Construction management services

71541000 - Construction project management services

71600000 - Technical testing, analysis and consultancy services

71621000 - Technical analysis or consultancy services

72000000 - IT services: consulting, software development, Internet and support

72100000 - Hardware consultancy services

72224000 - Project management consultancy services

72316000 - Data analysis services

73200000 - Research and development consultancy services

73210000 - Research consultancy services

79415000 - Production management consultancy services

79993100 - Facilities management services

90710000 - Environmental management

90713000 - Environmental issues consultancy services

Notice Value(s)

Tender Value

£800,000,000 £100M-£1B

Lots Value

£800,000,000 £100M-£1B

Awards Value

Not specified

Contracts Value

£80,000,000 £10M-£100M

Notice Dates

Publication Date

18 Jun 20251 years ago

Submission Deadline

18 Jan 2023Expired

Future Notice Date

13 Apr 2023Expired

Award Date

24 Mar 20233 years ago

Contract Period

Not specified - Not specified

Recurrence

Not specified

Notice Status

Tender Status

Complete

Lots Status

Active, Cancelled, Planned

Awards Status

Active

Contracts Status

Active

Contracting Authority (Buyer)

Main Buyer

The Minister for the Cabinet Office acting through Crown Commercial Service

Additional Buyers

Crown Commercial Service

Contact Name

Available with D3 Tenders Premium →

Contact Email

Available with D3 Tenders Premium →

Contact Phone

Available with D3 Tenders Premium →

Buyer Location

Locality

LIVERPOOL

Postcode

L3 9PP

Postcode Area

Liverpool

Country

England

---

Major Region (ITL 1)

TLD North West (England)

Basic Region (ITL 2)

TLD7 Merseyside

Small Region (ITL 3)

TLD72 Liverpool

Delivery Location

Not specified

---

Local Authority

Liverpool

Electoral Ward

City Centre North

Westminster Constituency

Liverpool Riverside

Supplier Information

Number of Suppliers

1

Supplier Name

See Contracts Finder Notice for full supplier list

Notice URLs

• https://crowncommercialservice.bravosolution.co.uk
• https://www.contractsfinder.service.gov.uk/Notice/51b6e47a-96c9-443a-b3e9-99549a6f275d
• https://www.contractsfinder.service.gov.uk/Notice/b252bdb5-b36c-4b7a-8f2f-cc71568d58e5
• https://www.crowncommercial.gov.uk/
• https://www.gov.uk/ccs
• https://www.gov.uk/government/publications/esourcing-tool-guidance-for-suppliers
• https://www.gov.uk/government/publications/government-security-classifications
• https://www.ncsc.gov.uk/information/cyber-essentials-faqs